Do you want to publish a course? Click here

The Reservoir Study of Jido Field in Graben Euphrates

دراسة مخزونية لحقل الجيدو في منخفض الفرات

1547   1   88   0 ( 0 )
 Publication date 2014
and research's language is العربية
 Created by Shamra Editor




Ask ChatGPT about the research

The correct study of the reservoir leads us to develop drilling programs suitable for producing stratum. In addition, this makes us do successful operations to achieve the best recover factor ,within the convenient time and at the lowest appropriate cost. This study will help us to avoid or solve many of the problems associated with the production processes and the most important problem of rehydration .In this research I did a geological and reservoir study of the Jido Field which is one of the fields of the Euphrates Company and it is located within the area of graben Euphrates in Deir Azure to the east of Syria, where recoverable reserves which are estimated in this field is about 83 million barrels. The objective of the study was to know the specifications and behavior of the reservoir and fluid inside and the possibility of a Hydrodynamic connection between blocks ,where this information is taken into account when calculating recoverable reserves and the assign of technological indicators for investment.

References used
AHMED T.MCKINNEY P,2005–Advanced Reservoir engineering. Gulf Professional Publishing ,USA,422
الخضور، غادة ، 2008 – iندسة مخزون النفط و الغاز ( 3) . جامعة البعث، كلية الهندسة الكيميائية و البترولية، 279.
الخضور، غادة، 2011 –هيدروليك الموائع الجوفية ( 2) .جامعة البعث ، كلية . الهندسة الكيميائية و البترولية، 268.
rate research

Read More

Al Rutba Formation , bellowing to the upper Cretaceous, is one the main formation of the stratigraphical coumn of Euphrate Depression. It is importance becomes from that it can statute the principle petroleum reservoir in high member of the depres sion fields. Producing oil and the natural gas. The importance of this group is to be the main reservoir of oil in various fields of low oil producing natural gas. The present study is based on subsurface geological data, presented by cores, well logs and chemical results of the analyses laboratory.
The various faults that hit the Tanak area were identified by studying the seismic sections in several directions and with specific exclusions, and intensifying those exclusions to increase their accuracy of clarity by using the most appropriate t ypes of seismic attribute maps for the 3D survey (Edge Enhancement map - Artificial Illumination map - Azimuth map - Dip map - Seismic Amplitude map - Polarity map - Frequency map) for accurate check of these faults and cracks in the studied area especially for Al- Rutbah formation. We found helpful and supportive indicators in order to determine its optimal location by applying previous seismic maps on its seismic surface. These maps were compared with each other after being exported to the Petrel program besides the time map of the study area. As a result, the fault boundaries were determined as accurately as possible by using the programs: (Geoframe - Petrel -Word).
The inclined shear restoration technique was used in this research as the primary method to remove the effects of fault displacements. These displacements were resulted from the impact of the NE-SW trending extensional forces. The inclined shear re storation technique was applied to the NE-SW trending seismic section (Inline A2157) along the Elward Area, using 2D move software. The vertical shear restoration technique was used as a complementary method to remove the effects of folding associated with faulting, especially to formations under the Base Upper Cretaceous Unconformity (BKU). The inclined shear and the vertical shear restoration techniques contrib uted to build many geological sections according to depth seismic section (Inline A 2157). These sections showed the Tectonic setting of the study area from Upper Ordovician till current time.
Due to the extensive and rapid processing of the Petrel program, we have relied on it to construct a three-dimensional geological model of the petrophysical properties of porosity, permeability, amount of saturation of hydrocarbons, GRV (Gross Roc k Volume), N/G, Bo, In addition to determining the oil – water contact levels For the studied area (Sabban field, - Ruttba and Malussa Formations) in order to calculate the oil reserve in a specific way and compare it with previous studies in order to deepen the oil understanding of the region and identify potential drilling opportunities.
Due to the wide and rapid processing provided by the petrel program, we have relied on the construction of a three-dimensional statistical model of the studied area (Sabban Field - Ruttba and Malussa Formations) using data for well-studied wells ( geochemistry, geophysical measurements and interpreted seismic data) To complete the reservoir study in a subsequent study.
comments
Fetching comments Fetching comments
Sign in to be able to follow your search criteria
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا