Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSimulations of the effects of tin composition gradients on the superconducting properties of Nb3Sn conductors
70
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In powder-in-tube (PIT) Nb3Sn composites, the A15 phase forms between a central tin-rich core and a coaxial Nb tube, thus causing the tin content and superconducting properties to vary with radius across the A15 layer. Since this geometry is also ideal for magnetic characterization of the superconducting properties with the field parallel to the tube axis, a system of concentric shells with varying tin content was used to simulate the superconducting properties, the overall severity of the Sn composition gradient being defined by an index N. Using well-known scaling relationships and property trends developed in an earlier experimental study, the critical current density for each shell was calculated, and from this the magnetic moment of each shell was found. By summing these moments, experimentally measured properties such as pinning-force curves and Kramer plots could be simulated. We found that different tin profiles have only a minor effect on the shape of Kramer plots, but a pronounced effect on the irreversibility fields defined by the extrapolation of Kramer plots. In fact, these extrapolated values H_K are very close to a weighted average of the superconducting properties across the layer for all N. The difference between H_K and the upper critical field commonly seen in experiments is a direct consequence of the different ways measurements probe the simulated Sn gradients. Sn gradients were found to be significantly deleterious to the critical current density Jc, since reductions to both the elementary pinning force and the flux pinning scaling field H_K compound the reduction in Jc. The simulations show that significant gains in Jc of Nb3Sn strands might be realized by circumventing strong compositional gradients of tin.
rate research
Read More
In modern Nb3Sn wires there is a fundamental compromise to be made between optimizing the intrinsic properties associated with the superfluid density in the A15 phase (e.g. Tc, Hc, Hc2, all of which are composition dependent), maximizing the quantity of A15 that can be formed from a given mixture of Nb, Sn and Cu, minimizing the A15 composition gradients within each sub-element, while at the same time generating a high vortex pinning critical current density, Jc, by maximizing the grain boundary density with the additional constraint of maintaining the RRR of the Cu stabilizer above 100. Here we study these factors in a Ta-alloyed Restacked-Rod-Process (RRP) wire with ~70 microns diameter sub-elements. Consistent with many earlier studies, maximum non-Cu Jc(12T,4.2K) requires preventing A15 grain growth, rather than by optimizing the superfluid density. In wires optimized for 12T, 4.2K performance, about 60% of the non-Cu cross-section is A15, 35% residual Cu and Sn core, and only 5% a residual Nb7.5wt.%Ta diffusion barrier. The specific heat and chemical analyses show that in this 60% A15 fraction there is a wide range of Tc and chemical composition that does diminish for higher heat treatment temperatures, which, however, are impractical because of the strong RRR degradation that occurs when only about 2% of the A15 reaction front breaches the diffusion barrier. As this kind of Nb3Sn conductor design is being developed for sub-elements 1/2 the present size, it is clear that better barriers are essential to allowing higher temperature reactions with better intrinsic A15 properties. We present here multiple and detailed intrinsic and extrinsic evaluations because we believe that only such broad and quantitative descriptions are capable of accurately tracking the limitations of individual conductor designs where optimization will always be a compromise between inherently conflicting goals
We report the preparation of Mg$_{1-x}$B$_{2}$ (0$le$x$le$0.5) compounds with the nominal compositions. Single phase MgB$_{2}$ was obtained for x=0 sample. For 0$<$x$le$0.5, MgB$_{4}$ coexists with MgB$_{2}$ and the amount of MgB$_{4}$ increases with x. With the increase of x, the lattice parameter ${it c}$ of MgB$_{2}$ increases and the lattice parameter ${it a}$ decreases, correspondingly T$_{c}$ of Mg$_{1-x}$B$_{2}$ decreases. The results were discussed in terms of the presence of Mg vacancies or B interstitials in the MgB$_{2}$ structure. This work is helpful to the understanding of the MgB$_{2}$ films with different T$_{c}$, as well as the Mg site doping effect for MgB$_{2}$.
We have grown superconducting TiN films by atomic layer deposition with thicknesses ranging from 6 to 89 nm. This deposition method allows us to tune the resistivity and critical temperature by controlling the film thickness. The microwave properties are measured, using a coplanar-waveguide resonator, and we find internal quality factors above a million, high sheet inductances (5.2-620 pH), and pulse response times up to 100 mu s. The high normal state resistivity of the films (> 100 muOmega cm) affects the superconducting state and thereby the electrodynamic response. The microwave response is modeled using a quasiparticle density of states modified with an effective pair-breaker,consistently describing the measured temperature dependence of the quality factor and the resonant frequency.
(Abridged abstract) Alloyed MgB2 differs from pure forms in that diffusion is needed to distribute the alloying elements homogeneously. Williamson-Hall analyses of x-ray diffraction peaks showed that Mg1-xAlxB2 samples made by a typical reaction A had higher crystalline strain than when thoroughly annealed by reaction B. The strain and other analyses indicate that reaction A produced substantial Al gradients across the individual grains while reaction B did not. The gredients skew the apparent superconducting behavior: properties appeared to be distinct when plotted vs. x (e.g. two Tc(x) curves), but all of the data merged when analyzed in terms of the unit cell volume v (e.g. one Tc(v) curve). Since v is derived from x-ray diffraction, it captures the average Al content actually present inside the grains and better reflects the behavior intrinsic to the addition of Al. These analyses show that it is important to coordinate structural and property characterizations to remove artifacts of composition gradients and uncover the intrinsic trends. Because the standard characterizations of the superconducting properties above gave no clear indication that the two sample sets had different homogeneity, the structural information was vital to make a correct assessment of the effects of Al doping on superconductivity.
We present an extensive irradiation study involving five state-of-the-art Nb3Sn wires which were subjected to sequential neutron irradiation up to a fast neutron fluence of 1.6 * 10^22 m^-2 (E > 0.1 MeV). The volume pinning force of short wire samples was assessed in the temperature range from 4.2 to 15 K in applied fields of up to 7 T by means of SQUID magnetometry in the unirradiated state and after each irradiation step. Pinning force scaling computations revealed that the exponents in the pinning force function differ significantly from those expected for pure grain boundary pinning, and that fast neutron irradiation causes a substantial change in the functional dependence of the volume pinning force. A model is presented, which describes the pinning force function of irradiated wires using a two-component ansatz involving a point-pinning contribution stemming from radiation induced pinning centers. The dependence of this point-pinning contribution on fast neutron fluence appears to be a universal function for all examined wire types.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
