Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMultipactor in High Power Radio-Frequency Systems for Nuclear Fusion
140
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Magnetic confinement fusion researches are an approach to demonstrate the feasibility of nuclear fusion power for energy production. In these experiments, mega-watt range power Radio-Frequency waves, from tens of MHz to hundreds of GHz, are injected into magnetically confined plasmas in order to increase its temperature and to extend its duration. These RF systems are subjected to the magnetic field environment of the experiments, ranging from few tenth of Tesla to Tesla, and various orientations depending of their locations. As these RF systems made of copper, silver or ceramics are located in vacuum environments, they are subject to multipactor discharges. These discharges are generally considered detrimental since they can lead to detuned RF systems, limit the RF power transmission in the plasma and eventually damage RF sources or components. In some case, especially in the MHz range of frequency, multipactor discharges can be desired for vacuum conditioning. This paper presents the various RF systems used in magnetic fusion experiments and review the work performed in the fusion research community on multipactor discharges for high power coaxial (MHz) and rectangular waveguides (GHz) transmission lines, with their practical implications on power delivery into the plasma.
rate research
Read More
Radio frequency (RF) waves can provide heating, current and flow drive, as well as instability control for steady state operations of fusion experiments. A particle simulation model has been developed in this work to provide a first-principles tool for studying the RF nonlinear interactions with plasmas. In this model, ions are considered as fully kinetic particles using the Vlasov equation and electrons are treated as guiding centers using the drift kinetic equation. This model has been implemented in a global gyrokinetic toroidal code (GTC) using real electron-to-ion mass ratio. To verify the model, linear simulations of ion plasma oscillation, ion Bernstein wave, and lower hybrid wave are carried out in cylindrical geometry and found to agree well with analytic predictions.
The nuclear fusion research goal is to demonstrate the feasibility of fusion power for peaceful purposes. In order to achieve the conditions similar to those expected in an electricity-generating fusion power plant, plasmas with a temperature of several hundreds of millions of degrees must be generated and sustained for long periods. For this purpose, RF antennas delivering multi-megawatts of power to magnetized confined plasma are commonly used in experimental tokamaks. In the gigahertz range of frequencies, high power phased arrays known as Lower Hybrid (LH) antennas are used to extend the plasma duration. This paper reviews some of the technological aspects of the LH antennas used in the Tore Supra tokamak and presents the current design of a proposed 20 MW LH system for the international experiment ITER.
Recent progress towards the non-fission ignition of thermonuclear micro-explosions raises the prospect for a revival of the nuclear bomb propulsion idea, both for the fast transport of large payloads within the solar system and the launch into earth orbit without the release of fission products into the atmosphere. To reach this goal three areas of research are of importance: 1)Compact thermonuclear ignition drivers. 2)Fast ignition and deuterium burn. 3)Space-craft architecture involving magnetic insulation and GeV electrostatic potentials
Vertical metal-insulator-graphene (MIG) diodes for radio frequency (RF) power detection are realized using a scalable approach based on graphene grown by chemical vapor deposition and TiO2 as barrier material. The temperature dependent current flow through the diode can be described by thermionic emission theory taking into account a bias induced barrier lowering at the graphene TiO2 interface. The diodes show excellent figures of merit for static operation, including high on-current density of up to 28 A/cm^2, high asymmetry of up to 520, strong maximum nonlinearity of up to 15, and large maximum responsivity of up to 26 V^{-1}, outperforming state-of-the-art metal-insulator-metal and MIG diodes. RF power detection based on MIG diodes is demonstrated, showing a responsivity of 2.8 V/W at 2.4 GHz and 1.1 V/W at 49.4 GHz.
Radio-frequency (RF) systems deliver the power to change the energy of a charged particle beam, and they are integral parts of linear and circular accelerators. A longitudinal electrical field in the direction of the beam is generated in a resonant structure, the RF cavity. As it directly interacts with the bunches of charged particles, the cavity can be considered as a coupler to transport energy from an RF power power amplifier to the beam. The power amplifier itself is driven by a low-level RF system assuring that frequency and phase are suitable for acceleration, and feedback loops improve the longitudinal beam stability. The spectrum of RF systems in particle accelerators in terms of frequency range and RF voltage is wide. Special emphasis is given to the constraints and requirements defined by the beam, which guides the appropriate choices for the RF systems.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
