Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userLower Hybrid antennas for nuclear fusion experiments
264
0
0.0
(
0
)
Authors
Julien Hillairet
Ask ChatGPT about the research
No Arabic abstract
The nuclear fusion research goal is to demonstrate the feasibility of fusion power for peaceful purposes. In order to achieve the conditions similar to those expected in an electricity-generating fusion power plant, plasmas with a temperature of several hundreds of millions of degrees must be generated and sustained for long periods. For this purpose, RF antennas delivering multi-megawatts of power to magnetized confined plasma are commonly used in experimental tokamaks. In the gigahertz range of frequencies, high power phased arrays known as Lower Hybrid (LH) antennas are used to extend the plasma duration. This paper reviews some of the technological aspects of the LH antennas used in the Tore Supra tokamak and presents the current design of a proposed 20 MW LH system for the international experiment ITER.
rate research
Read More
Recent progress towards the non-fission ignition of thermonuclear micro-explosions raises the prospect for a revival of the nuclear bomb propulsion idea, both for the fast transport of large payloads within the solar system and the launch into earth orbit without the release of fission products into the atmosphere. To reach this goal three areas of research are of importance: 1)Compact thermonuclear ignition drivers. 2)Fast ignition and deuterium burn. 3)Space-craft architecture involving magnetic insulation and GeV electrostatic potentials
The sustainment of steady-state plasmas in tokamaks requires efficient current drive systems. Lower Hybrid Current Drive (LHCD) is currently the most efficient method to generate a continuous additional off-axis toroidal plasma current as well as reduce the poloidal flux consumption during the plasma current ramp-up phase. The operation of the Tore Supra ITER-like LH launcher has demonstrated the capability to couple LH power at ITER-like power densities with very low reflected power during long pulses. In addition, the installation of eight 700kW/CW klystrons at the LH transmitter has allowed increasing the total LH power in long pulse scenarios. However, in order to achieve pure stationary LH sustained plasmas, some R&D are needed to increase the reliability of all the systems and codes, from the RF sources to the plasma scenario prediction. The CEA/IRFM is addressing some of these issues by leading a R&D program towards an ITER LH system and by the validation of an integrated LH modeling suite of codes. In 2011, the RF design of a mode converter has been validated at low power. A 500 kW/5 s RF window is currently under manufacturing and will be tested at high power in 2012 in collaboration with NFRI. All of this work aims to reduce the operational risks associated with the ITER steady-state operations.
Neutron penumbral imaging technique has been successfully used as the diagnosis method in Inertial Confined Fusion. To help the design of the imaging systems in the future in CHINA. We construct the Monte carlo imaging system by Geant4. Use the point spread function from the simulation and decode algorithm (Lucy-Rechardson algorithm) we got the recovery image.
Magnetic confinement fusion researches are an approach to demonstrate the feasibility of nuclear fusion power for energy production. In these experiments, mega-watt range power Radio-Frequency waves, from tens of MHz to hundreds of GHz, are injected into magnetically confined plasmas in order to increase its temperature and to extend its duration. These RF systems are subjected to the magnetic field environment of the experiments, ranging from few tenth of Tesla to Tesla, and various orientations depending of their locations. As these RF systems made of copper, silver or ceramics are located in vacuum environments, they are subject to multipactor discharges. These discharges are generally considered detrimental since they can lead to detuned RF systems, limit the RF power transmission in the plasma and eventually damage RF sources or components. In some case, especially in the MHz range of frequency, multipactor discharges can be desired for vacuum conditioning. This paper presents the various RF systems used in magnetic fusion experiments and review the work performed in the fusion research community on multipactor discharges for high power coaxial (MHz) and rectangular waveguides (GHz) transmission lines, with their practical implications on power delivery into the plasma.
An indirect-direct hybrid-drive work-dominated hotspot ignition scheme for inertial confinement fusion is proposed: a layered fuel capsule inside a spherical hohlraum with an octahedral symmetry is compressed first by indirect-drive soft-x rays (radiation) and then by direct-drive lasers in last pulse duration. In this scheme, an enhanced shock and a follow-up compression wave for ignition with pressure far greater than the radiation ablation pressure are driven by the direct-drive lasers, and provide large pdV work to the hotspot to perform the work-dominated ignition. The numerical simulations show that the enhanced shock stops the reflections of indirect-drive shock at the main fuel-hotspot interface, and therefore significantly suppresses the hydrodynamic instabilities and asymmetry. Based on the indirect-drive implosion dynamics the hotspot is further compressed and heated by the enhanced shock and follow-up compression wave, resulting in the work-dominated hotspot ignition and burn with a maximal implosion velocity of ~400 km/s and a lower convergence ratio of ~25. The fusion yield of 15 MJ using total laser energy of 1.32 MJ is achieved.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
