Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userBroadband suppression of backscattering at optical frequencies using low permittivity dielectric spheres
146
0
0.0
(
0
)
Added by
Mohamed Ismail Abdelrahman
Publication date
2017
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
The exact suppression of backscattering from rotationally symmetric objects requires dual symmetric materials where ${epsilon_r} = {mu_r}$. This prevents their design at many frequency bands, including the optical one, because magnetic materials are not available. Electromagnetically small non-magnetic spheres of large permittivity offer an alternative. They can be tailored to exhibit balanced electric and magnetic dipole polarizabilities, which result in approximate zero backscattering. In this case, the effect is inherently narrowband. Here, we put forward a different alternative that allows broadband functionality: Electromagnetically large spheres made from low permittivity materials. The effect occurs in a parameter regime that approaches the trivial ${epsilon_r} to {mu_r} =1$ case, where approximate duality is met in a weakly wavelength dependence fashion. Despite the low permittivity, the overall scattering response of the spheres is still significant. Radiation patterns from these spheres are shown to be highly directive across an octave spanning band. The effect is analytically and numerically shown using the Mie coefficients.
rate research
Read More
As light propagates along a waveguide, a fraction of the field can be reflected by Rayleigh scatterers. In high-quality-factor whispering-gallery-mode microresonators, this intrinsic backscattering is primarily caused by either surface or bulk material imperfections. For several types of microresonator-based experiments and applications, minimal backscattering in the cavity is of critical importance, and thus, the ability to suppress backscattering is essential. We demonstrate that the introduction of an additional scatterer into the near field of a high-quality-factor microresonator can coherently suppress the amount of backscattering in the microresonator by more than 30 dB. The method relies on controlling the scatterer position such that the intrinsic and scatterer-induced backpropagating fields destructively interfere. This technique is useful in microresonator applications where backscattering is currently limiting the performance of devices, such as ring-laser gyroscopes and dual frequency combs, which both suffer from injection locking. Moreover, these findings are of interest for integrated photonic circuits in which back reflections could negatively impact the stability of laser sources or other components.
Arrays of wavelength scale scatterers are a promising platform for designing optical elements with a compact footprint. The large number of degrees of freedom in this system allows for unique and plentiful functionalities. However, the many variables also create a complex design problem. While intuitive forward design methods work for simple optical elements, they often fail to produce complicated elements, especially those involving multiple elements. We present an inverse design methodology for large arrays of wavelength scale spheres based on both adjoint optimization or sensitivity analysis and generalized multi-sphere Mie theory as a solution to the design problem. We validate our methodology by designing two sets of optical elements with scatterers on sub-wavelength and super-wavelength periodicity grids. Both sets consist of a singlet and a doublet lens, with one and two layers of spheres respectively designed for 1550 nm. The designed NA is ~0.33 (~0.5) for the sub-wavelength (super-wavelength) periodic structure. We find that with the sub-wavelength periodicity, the full width at half maximum of the focal spot produced by the singlet and doublet is smaller than that produced by an ideal lens with the same geometric parameters. Finally, we simulate a realistic experimental scenario for the doublet where the spheres are placed on a substrate with the same refractive index. We find the performance is similar, but with lower intensity at the focal spot and larger spot size. The method described here will simplify the design procedure for complicated multifunctional optical elements and or scatterer array-based volume optics based on a specified figure of merit.
The ability to create dynamic, tailored optical potentials has become important across fields ranging from biology to quantum science. We demonstrate a method for the creation of arbitrary optical tweezer potentials using the broadband spectral profile of a superluminescent diode combined with the chromatic aberration of a lens. A tunable filter, typically used for ultra-fast laser pulse shaping, allows us to manipulate the broad spectral profile and therefore the optical tweezer potentials formed by focusing of this light. We characterize these potentials by measuring the Brownian motion of levitated nanoparticles in vacuum and, also demonstrate interferometric detection and feedback cooling of the particle,s motion. This simple and cost-effective technique will enable a wide range of applications and allow rapid modulation of the optical potential landscape in excess of MHz frequencies.
Manipulating the excitation of resonant electric and magnetic multipole moments in structured dielectric media has unlocked many sophisticated electromagnetic functionalities. This article demonstrates the experimental realization of a broadband Huygens source. This Huygens source consists of a spherical particle that exhibits a well-defined forward-scattering pattern across more than an octave-spanning spectral band at GHz frequencies, where the scattering in the entire backward hemisphere is suppressed. Two different low-index nonmagnetic spheres are studied that differ in their permittivity. This causes them to offer a different shape for the forward-scattering pattern. The theoretical understanding of this broadband feature is based on the approximate equality of the resonant electric and magnetic multipole moments in both amplitude and phase in low permittivity spheres. This is a key condition to approximate the electromagnetic duality symmetry which, together with the spherical symmetry, suppresses the backscattering. With such a configuration, broadband Huygens sources can be designed even if magnetic materials are unavailable. This article provides guidelines for designing broadband Huygens sources using low-index spheres that could be valuable to a plethora of applications.
We use hollow-core fibre to preserve the spectrum and temporal profile of picosecond laser pulses in CBD to suppress 2.6 dB of amplitude noise at MHz noise frequencies, to within 0.01 dB of the shot-noise limit. We provide an enhanced version of the CBD scheme that concatenates circuits to suppress over multiple frequencies and over broad frequency ranges --- we perform a first demonstration that reduces total excess amplitude noise, between 2 - 6 MHz, by 85%. These demonstrations enable passive, broad-band, all-guided fibre laser technology operating at the shot-noise limit.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
