Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPassive, broadband and low-frequency suppression of laser amplitude noise to the shot-noise limit using hollow-core fibre
97
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We use hollow-core fibre to preserve the spectrum and temporal profile of picosecond laser pulses in CBD to suppress 2.6 dB of amplitude noise at MHz noise frequencies, to within 0.01 dB of the shot-noise limit. We provide an enhanced version of the CBD scheme that concatenates circuits to suppress over multiple frequencies and over broad frequency ranges --- we perform a first demonstration that reduces total excess amplitude noise, between 2 - 6 MHz, by 85%. These demonstrations enable passive, broad-band, all-guided fibre laser technology operating at the shot-noise limit.
rate research
Read More
Ultra-low frequency noise lasers have been widely used in laser-based experiments. Most narrow-linewidth lasers are implemented by actively suppressing their frequency noise through a frequency noise servo loop (FNSL). The loop bandwidths (LBW) of FNSLs are currently below megahertz, which is gradually tricky to meet application requirements, especially for wideband quantum sensing experiments. This article has experimentally implemented an FNSL with loop-delay-limited 3.5 MHz LBW, which is an order higher than the usual FNSLs. Using this FNSL, we achieved 70 dB laser frequency noise suppression over 100 kHz Fourier frequency range. This technology has broad applications in vast fields where wideband laser frequency noise suppression is inevitable.
We demonstrate a method for accurately locking the frequency of a continuous-wave laser to an optical frequency comb in conditions where the signal-to-noise ratio is low, too low to accommodate other methods. Our method is typically orders of magnitude more accurate than conventional wavemeters and can considerably extend the usable wavelength range of a given optical frequency comb. We illustrate our method by applying it to the frequency control of a dipole lattice trap for an optical lattice clock, a representative case where our method provides significantly better accuracy than other methods.
We describe a Yb-fiber based laser comb, with a focus on the relationship between net-cavity dispersion and the frequency noise on the comb. While tuning the net cavity dispersion from anomalous to normal, we measure the amplitude noise (RIN), offset frequency (f_CEO) linewidth, and the resulting frequency noise spectrum on f_CEO. We find that the laser operating at zero net-cavity dispersion has many advantages, including an approximately 100x reduction in free-running f_CEO linewidth and frequency noise power spectral density between laser operation at normal and zero dispersion. In this latter regime, we demonstrate a phase-locked f_CEO beat with low residual noise.
We propose a nonlinear fiber system for shot-noise limited, all-optical intensity-noise reduction and signal amplification. The mechanism is based on the accumulation of different nonlinear phase shifts between orthogonal polarization modes in a polarization-maintaining fiber amplifier in combination with an implemented sinusoidal transmission-function. The resulting correlation between the input intensity-fluctuations and the system transmission enables tunable intensity noise reduction of the input pulse train. In the experiment, the noise spectral density of a mode-locked oscillator is suppressed by up to ~20 dB to the theoretical shot-noise limit of the measurement at -151.3 dBc/Hz with simultaneous pulse amplification of 13.5dB.
Evaluating entropy rate of high-dimensional chaos and shot noise from analog raw signals remains elusive and important in information security. We experimentally present an accurate assessment of entropy rate for physical process randomness. The entropy generation of optical-feedback laser chaos and physical randomness limit from shot noise are quantified and unambiguously discriminated using the growth rate of average permutation entropy value in memory time. The permutation entropy difference of filtered laser chaos with varying embedding delay time is investigated experimentally and theoretically. High resolution maps of the entropy difference is observed over the range of the injection-feedback parameter space. We also clarify an inverse relationship between the entropy rate and time delay signature of laser chaos over a wide range of parameters. Compared to the original chaos, the time delay signature is suppressed up to 95% with the minimum of 0.015 via frequency-band extractor, and the experiment agrees well with the theory. Our system provides a commendable entropy evaluation and source for physical random number generation.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
