Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA metric for wettability at the nanoscale
55
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Wettability is the affinity of a liquid for a solid surface. For energetic reasons, macroscopic drops of liquid are nearly spherical away from interfaces with solids, and any local deformations due to molecular-scale surface interactions are negligible. Studies of wetting phenomena, therefore, typically assume that a liquid on a surface adopts the shape of a spherical cap. The degree of wettability is then captured by the contact angle where the liquid-vapor interface meets the solid-liquid interface. As droplet volumes shrink to the scale of attoliters, however, surface interactions become significant, and droplets gradually assume distorted shapes that no longer comply with our conventional, macroscopic conception of a drop. In this regime, the contact angle becomes ambiguous, and it is unclear how to parametrize a liquids affinity for a surface. A scalable metric for quantifying wettability is needed, especially given the emergence of technologies exploiting liquid-solid interactions at the nanoscale. Here we combine nanoscale experiments with molecular-level simulation to study the breakdown of spherical droplet shapes at small length scales. We demonstrate how measured droplet topographies increasingly reveal non-spherical features as volumes shrink, in agreement with theoretical predictions. Ultimately, the nanoscale liquid flattens out to form layer-like molecular assemblies, instead of droplets, at the solid surface. For the lack of a consistent contact angle at small scales, we introduce a droplets adsorption energy density as a new metric for a liquids affinity for a surface. We discover that extrapolating the macroscopic idealization of a drop to the nanoscale, though it does not geometrically resemble a realistic droplet, can nonetheless recover its adsorption energy if line tension is properly included.
rate research
Read More
We have performed quantum Monte Carlo simulations measuring the finite size and temperature superfluid response of helium-4 to the linear and rotational motion of the walls of a nanopore. Within the two-fluid model, the portion of the normal liquid dragged along with the boundaries is dependent on the type of motion and the resulting anisotropic superfluid density saturates far below unity at T=0.5 K. The origin of the saturation is uncovered by computing the spatial distribution of superfluidity, with only the core of the nanopore exhibiting any evidence of phase coherence. The superfluid core displays scaling behavior consistent with Luttinger liquid theory, thereby providing an experimental test for the emergence of a one dimensional quantum liquid.
There is a growing effort in creating chiral transport of sound waves. However, most approaches so far are confined to the macroscopic scale. Here, we propose a new approach suitable to the nanoscale which is based on pseudomagnetic fields. These fields are the analogon for sound of the pseudomagnetic field for electrons in strained graphene. In our proposal, they are created by simple geometrical modifications of an existing and experimentally proven phononic crystal design, the snowflake crystal. This platform is robust, scalable, and well-suited for a variety of excitation and readout mechanisms, among them optomechanical approaches.
We analyze the benefits and shortcomings of a thermal control in nanoscale electronic conductors by means of the contact heating scheme. Ideally, this straightforward approach allows one to apply a known thermal bias across nanostructures directly through metallic leads, avoiding conventional substrate intermediation. We show, by using the average noise thermometry and local noise sensing technique in InAs nanowire based devices, that a nanoscale metallic constriction on a SiO2 substrate acts like a diffusive conductor with negligible electron-phonon relaxation and non-ideal leads. The non-universal impact of the leads on the achieved thermal bias -- which depends on their dimensions, shape and material composition -- is hard to minimize, but is possible to accurately calibrate in a properly designed nano-device. Our results allow to reduce the issue of the thermal bias calibration to the knowledge of the heater resistance and pave the way for accurate thermoelectric or similar measurements at the nanoscale.
We investigate electron transport across a complex oxide heterointerface of La$_{0.67}$Sr$_{0.33}$MnO$_3$ (LSMO) on Nb:SrTiO$_3$ (Nb:STO) at different temperatures. For this, we employ the conventional current-voltage method as well as the technique of Ballistic Electron Emission Microscopy (BEEM), which can probe lateral inhomogeneities in transport at the nanometer scale. From current-voltage measurements, we find that the Schottky Barrier height (SBH) at the LSMO/Nb:STO interface decreases at low temperatures accompanied by a larger than unity ideality factor. This is ascribed to the tunneling dominated transport caused by the narrowing of the depletion width at the interface. However, BEEM studies of such unbiased interfaces, do not exhibit SBH lowering at low temperatures, implying that this is triggered by the modification of the interface due to an applied bias and is not an intrinsic property of the interface. Interestingly, the SBH at the nanoscale, as extracted from BEEM studies, at different locations in the device is found to be spatially homogeneous and similar both at room temperature and at low temperatures. Our results highlight the application of BEEM in characterizing electron transport and their homogeneity at such unbiased complex oxide interfaces and yields new insights into the origin of the temperature dependence of the SBH at biased interfaces.
We report an electron-beam based method for the nanoscale patterning of the poly(ethylene oxide)/LiClO$_{4}$ polymer electrolyte. We use the patterned polymer electrolyte as a high capacitance gate dielectric in single nanowire transistors and obtain subthreshold swings comparable to conventional metal/oxide wrap-gated nanowire transistors. Patterning eliminates gate/contact overlap which reduces parasitic effects and enables multiple, independently controllable gates. The methods simplicity broadens the scope for using polymer electrolyte gating in studies of nanowires and other nanoscale devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
