Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSensor Fault Detection, Isolation and Identification Using Multiple Model-based Hybrid Kalman Filter for Gas Turbine Engines
330
0
0.0
(
0
)
Added by
Bahareh Pourbabaee
Publication date
2015
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
In this paper, a novel sensor fault detection, isolation and identification (FDII) strategy is proposed by using the multiple model (MM) approach. The scheme is based on multiple hybrid Kalman filters (HKF) which represents an integration of a nonlinear mathematical model of the system with a number of piecewise linear (PWL) models. The proposed fault detection and isolation (FDI) scheme is capable of detecting and isolating sensor faults during the entire operational regime of the system by interpolating the PWL models using a Bayesian approach. Moreover, the proposed multiple HKF-based FDI scheme is extended to identify the magnitude of a sensor fault by using a modified generalized likelihood ratio (GLR) method which relies on the healthy operational mode of the system. To illustrate the capabilities of our proposed FDII methodology, extensive simulation studies are conducted for a nonlinear gas turbine engine. Various single and concurrent sensor fault scenarios are considered to demonstrate the effectiveness of our proposed on-line hierarchical multiple HKF-based FDII scheme under different flight modes. Finally, our proposed HKF-based FDI approach is compared with various filtering methods such as the linear, extended, unscented and cubature Kalman filters (LKF, EKF, UKF and CKF, respectively) corresponding to both interacting and non-interacting multiple model (MM) based schemes. Our comparative studies confirm the superiority of our proposed HKF method in terms of promptness of the fault detection, lower false alarm rates, as well as robustness with respect to the engine health parameters degradations.
rate research
Read More
The spatial dependent unknown acoustic source is reconstructed according noisy multiple frequency data on a remote closed surface. Assume that the unknown function is supported on a bounded domain. To determine the support, we present a statistical inversion algorithm, which combines the ensemble Kalman filter approach with level set technique. Several numerical examples show that the proposed method give good numerical reconstruction.
This paper considers the problem of simultaneous sensor fault detection, isolation, and networked estimation of linear full-rank dynamical systems. The proposed networked estimation is a variant of single time-scale protocol and is based on (i) consensus on textit{a-priori} estimates and (ii) measurement innovation. The necessary connectivity condition on the sensor network and stabilizing block-diagonal gain matrix is derived based on our previous works. Considering additive faults in the presence of system and measurement noise, the estimation error at sensors is derived and proper residuals are defined for fault detection. Unlike many works in the literature, no simplifying upper-bound condition on the noise is considered and we assume Gaussian system/measurement noise. A probabilistic threshold is then defined for fault detection based on the estimation error covariance norm. Finally, a graph-theoretic sensor replacement scenario is proposed to recover possible loss of networked observability due to removing the faulty sensor. We examine the proposed fault detection and isolation scheme on an illustrative academic example to verify the results and make a comparison study with related literature.
For additive actuator and sensor faults, we propose a systematic method to design a state-space fault estimation filter directly from Markov parameters identified from fault-free data. We address this problem by parameterizing a system-inversion-based fault estimation filter with the identified Markov parameters. Even without building an explicit state-space plant model, our novel approach still allows the filter gain design for stabilization and suboptimal $mathcal{H}_2$ performance. This design freedom cannot be achieved by other existing data-driven fault estimation filter designs so far. Another benefit of our proposed design is the convenience of determining the state order: a higher state order of the filter leads to better estimation performance, at the cost of heavier computational burden. In contrast, order determination is cumbersome when using an identified state-space plant model for the filter design, because of the complicated propagation of the model mismatch into the fault estimation errors. Simulations using an unstable aircraft system illustrate the effectiveness of the proposed new method.
Long-term inertial navigation is currently limited by the bias drifts of gyroscopes and accelerometers and ultra-stable cold-atom interferometers offer a promising alternative for the next generation of high-end navigation systems. Here, we present an experimental setup and an algorithm hybridizing a stable matter-wave interferometer with a classical accelerometer. We use correlations between the quantum and classical devices to track the bias drift of the latter and form a hybrid sensor. We apply the Kalman filter formalism to obtain an optimal estimate of the bias and simulate experimentally a harsh environment representative of that encountered in mobile sensing applications. We show that our method is more precise and robust than traditional sine-fitting methods. The resulting sensor exhibits a 400 Hz bandwidth and reaches a stability of 10 ng after 11 h of integration.
This paper deals with the fault detection and isolation (FDI) problem for linear structured systems in which the system matrices are given by zero/nonzero/arbitrary pattern matrices. In this paper, we follow a geometric approach to verify solvability of the FDI problem for such systems. To do so, we first develop a necessary and sufficient condition under which the FDI problem for a given particular linear time-invariant system is solvable. Next, we establish a necessary condition for solvability of the FDI problem for linear structured systems. In addition, we develop a sufficient algebraic condition for solvability of the FDI problem in terms of a rank test on an associated pattern matrix. To illustrate that this condition is not necessary, we provide a counterexample in which the FDI problem is solvable while the condition is not satisfied. Finally, we develop a graph-theoretic condition for the full rank property of a given pattern matrix, which leads to a graph-theoretic condition for solvability of the FDI problem.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
