Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userNanoscale spatial resolution probes for Scanning Thermal Microscopy of solid state materials
143
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Scanning Thermal Microscopy (SThM) uses micromachined thermal sensors integrated in a force sensing cantilever with a nanoscale tip can be highly useful for exploration of thermal management of nanoscale semiconductor devices. As well as mapping of surface properties of related materials. Whereas SThM is capable to image externally generated heat with nanoscale resolution, its ability to map and measure thermal conductivity of materials has been mainly limited to polymers or similar materials possessing low thermal conductivity in the range from 0.1 to 1 W/mK, with lateral resolution on the order of 1 mum. In this paper we use linked experimental and theoretical approaches to analyse thermal performance and sensitivity of the micromachined SThM probes in order to expand their applicability to a broader range of nanostructures from polymers to semiconductors and metals. We develop physical models of interlinked thermal and electrical phenomena in these probes and then validate these models using experimental measurements of the real probes, which provided the basis for analysing SThM performance in exploration of nanostructures. Our study then highlights critical features of these probes, namely, the geometrical location of the thermal sensor with respect to the probe apex, thermal conductance of the probe to the support base, heat conduction to the surrounding gas, and the thermal conductivity of tip material adjacent to the apex. It is furthermore allows us to propose a novel design of the SThM probe that incorporates a carbon nanotube (CNT) or similar high thermal conductivity graphene sheet material positioned near the probe apex. The new sensor is predicted to provide spatial resolution to the thermal properties of nanostructures on the order of few tens of nm, as well as to expand the sensitivity of the SThM probe to materials with heat conductivity values up to 100-1000 W/mK.
rate research
Read More
Magnetic microscopy that combines nanoscale spatial resolution with picosecond scale temporal resolution uniquely enables direct observation of the spatiotemporal magnetic phenomena that are relevant to future high-speed, high-density magnetic storage and logic technologies. Magnetic microscopes that combine these metrics has been limited to facility-level instruments. To address this gap in lab-accessible spatiotemporal imaging, we develop a time-resolved near-field magnetic microscope based on magneto-thermal interactions. We demonstrate both magnetization and current density imaging modalities, each with spatial resolution that far surpasses the optical diffraction limit. In addition, we study the near-field and time-resolved characteristics of our signal and find that our instrument possesses a spatial resolution on the scale of 100 nm and a temporal resolution below 100 ps. Our results demonstrate an accessible and comparatively low-cost approach to nanoscale spatiotemporal magnetic microscopy in a table-top form to aid the science and technology of dynamic magnetic devices with complex spin textures.
The electronic spin of the nitrogen vacancy (NV) center in diamond forms an atomically sized, highly sensitive sensor for magnetic fields. To harness the full potential of individual NV centers for sensing with high sensitivity and nanoscale spatial resolution, NV centers have to be incorporated into scanning probe structures enabling controlled scanning in close proximity to the sample surface. Here, we present an optimized procedure to fabricate single-crystal, all-diamond scanning probes starting from commercially available diamond and show a highly efficient and robust approach for integrating these devices in a generic atomic force microscope. Our scanning probes consisting of a scanning nanopillar (200 nm diameter, $1-2,mu$m length) on a thin ($< 1mu$m) cantilever structure, enable efficient light extraction from diamond in combination with a high magnetic field sensitivity ($mathrm{eta_{AC}}approx50pm20,mathrm{nT}/sqrt{mathrm{Hz}}$). As a first application of our scanning probes, we image the magnetic stray field of a single Ni nanorod. We show that this stray field can be approximated by a single dipole and estimate the NV-to-sample distance to a few tens of nanometer, which sets the achievable resolution of our scanning probes.
We present a new method for high-resolution nanoscale magnetic resonance imaging (nano-MRI) that combines the high spin sensitivity of nanowire-based magnetic resonance detection with high spectral resolution nuclear magnetic resonance (NMR) spectroscopy. By applying NMR pulses designed using optimal control theory, we demonstrate a factor of $500$ reduction of the proton spin resonance linewidth in a $(50text{-nm})^{text{3}}$ volume of polystyrene and image proton spins in one dimension with a spatial resolution below $2~text{nm}$.
Scanning superconducting quantum interference device microscopy (sSQUID) is currently one of the most effective methods for direct and sensitive magnetic flux imaging on the mesoscopic scale. A SQUID-on-chip design allows integration of field coils for susceptometry in a gradiometer setup which is very desirable for measuring magnetic responses of quantum matter. However, the spatial resolution of such a design has largely been limited to micrometers due to the difficulty in approaching the sample. Here, we used electron beam lithography technology in the fabrication of the 3D nano-bridge-based SQUID devices to prepare pick-up coils with diameters down to 150 nm. Furthermore, we integrated the deep silicon etching process in order to minimize the distance between the pick-up coil and the wafer edge. Combined with a tuning-fork-based scanning head, the sharpness of the etched chip edge enables a precision of 5 nm in height control. By scanning measurements on niobium chessboard samples using these improved SQUID devices, we demonstrate sub-micron spatial resolutions in both magnetometry and susceptometry, significantly better than our previous generations of nano-SQUIDs. Such improvement in spatial resolution of SQUID-on-chip is a valuable progress for magnetic imaging of quantum materials and devices in various modes.
The negatively-charged nitrogen-vacancy center (NV) in diamond forms a versatile system for quantum sensing applications. Combining the advantageous properties of this atomic-sized defect with scanning probe techniques such as atomic force microscopy (AFM) enables nanoscale imaging of e.g. magnetic fields. To form a scanning probe device, we place single NVs shallowly (i.e. < 20 nm) below the top facet of a diamond nanopillar, which is located on a thin diamond platform of typically below 1 mu m thickness. This device can be attached to an AFM head, forming an excellent scanning probe tip. Furthermore, it simultaneously influences the collectible photoluminescence (PL) rate of the NV located inside. Especially sensing protocols using continuous optically-detected magnetic resonance (ODMR) benefit from an enhanced collectible PL rate, improving the achievable sensitivity. This work presents a comprehensive set of simulations to quantify the influence of the device geometry on the collectible PL rate for individual NVs. Besides geometric parameters (e.g. pillar length, diameter and platform thickness), we also focus on fabrication uncertainties such as the exact position of the NV or the taper geometry of the pillar introduced by imperfect etching. As a last step, we use these individual results to optimize our current device geometry, yielding a realistic gain in collectible PL rate by a factor of 13 compared to bulk diamond and 1.8 compared to our unoptimized devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
