اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدDouble-absorber thin-film solar cell with 34% efficiency
99
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Power-conversion efficiency is a critical factor for the wider adoption of solar-cell modules. Thin-film solar cells are cheap and easy to manufacture, but their efficiencies are low compared to crystalline-silicon solar cells and need to be improved. A thin-film solar cell with two absorber layers (instead of only one), with bandgap energy graded in both, can capture solar photons in a wider spectral range. With a 300-nm-thick CIGS~absorber layer and an 870-nm-thick CZTSSe~absorber layer, an efficiency of $34.45%$ is predicted by a detailed optoelectronic model, provided that the grading of bandgap energy is optimal in both absorber layers.
قيم البحث
اقرأ أيضاً
The rigorous coupled wave approach (RCWA) was implemented to investigate optical absorption in a triple-p-i-n-junction amorphous-silicon solar cell with a 2D metallic periodically corrugated backreflector (PCBR). Both total and useful absorptances we
re computed against the free-space wavelength $lambda_o$ for both s- and p-polarized polarization states. The useful absorptance in each of the three p-i-n junctions was also computed for normal as well as oblique incidence. Furthermore, two canonical boundary-value problems were solved for the prediction of guided-wave modes (GWMs): surface-plasmon-polariton waves and waveguide modes. Use of the doubly periodic PCBR enhanced both useful and total absorptances in comparison to a planar backreflector. The predicted GWMs were correlated with the peaks of the total and useful absorptances. The excitation of GWMs was mostly confined to $lambda_o < 700$ nm and enhanced absorption. As excitation of certain GWMs could be correlated with the total absorptance but not with the useful absorptance, the useful absorptance should be studied while devising light-trapping strategies.
A coupled optoelectronic model was implemented along with the differential evolution algorithm to assess the efficacy of grading the bandgap of the CZTSSe layer for enhancing the power conversion efficiency of thin-film CZTSSe solar cells. Both linea
rly and sinusoidally graded bandgaps were examined, with the molybdenum backreflector in the solar cell being either planar or periodically corrugated. Whereas an optimally graded bandgap can dramatically enhance the efficiency, the effect of periodically corrugating the backreflector is modest at best. An efficiency of 21.74% is predicted with sinusoidal grading of a 870-nm-thick CZTSSe layer, in comparison to 12.6% efficiency achieved experimentally with a 2200-nm-thick homogeneous CZTSSe layer. High electron-hole-pair generation rates in the narrow-bandgap regions and a high open-circuit voltage due to a wider bandgap close to the front and rear faces of the CZTSSe layer are responsible for the high enhancement of efficiency.
An optoelectronic optimization was carried out for an AlGaAs solar cell containing (i) an n-AlGaAs absorber layer with a graded bandgap and (ii) a periodically corrugated Ag backreflector combined with localized ohmic Pd-Ge-Au backcontacts. The bandg
ap of the absorber layer was varied either sinusoidally or linearly. An efficiency of 33.1% with the 2000-nm-thick n-AlGaAs absorber layer is predicted with linearly graded bandgap along with silver backreflector and localized ohmic backcontacts, in comparison to 27.4% efficiency obtained with homogeneous bandgap and a continuous ohmic backcontact. Sinusoidal grading of the bandgap {is predicted to enhance} the maximum efficiency to 34.5%. Thus, grading the bandgap of the absorber layer, along with a periodically corrugated Ag backreflector and localized ohmic Pd-Ge-Au backcontacts can help realize ultrathin and high-efficient AlGaAs solar cells for terrestrial applications.
We propose a concentrated thermionic emission solar cell design, which demonstrates a high solar-to-electricity energy conversion efficiency larger than 10% under 600 sun, by harnessing the exceptional electrical, thermal and radiative properties of
the graphene as a collector electrode. By constructing an analytical model that explicitly takes into account the non-Richardson behavior of the thermionic emission current from graphene, space charge effect in vacuum gap, and the various irreversible energy losses within the subcomponents, we perform a detailed characterization on the conversion efficiency limit and electrical power output characteristics of the proposed system. We systematically model and compare the energy conversion efficiency of various configurations of graphene-graphene and graphene-diamond and diamond-diamond thermionic emitter, and show that utilizing diamond films as an emitter and graphene as a collector offers the highest maximum efficiency, thus revealing the important role of graphene in achieving high-performance thermionic emission solar cell. A maximum efficiency of 12.8% under 800 sun has been revealed, which is significantly higher than several existing solid-state solar cell designs, such as the solar-driven thermoelectric and thermophotovoltaic converters. Our work thus opens up new avenues to advance the efficiency limit of thermionic solar energy conversion and the development of next-generation novel-nanomaterial-based solar energy harvesting technology.
We theoretically and experimentally propose two designs of broadband low-frequency acoustic metasurface absorbers (Sample I/Sample II) for the frequency ranges of 458Hz~968Hz and 231Hz~491Hz (larger than 1 octave), with absorption larger than 0.8, an
d having the ultra-thin thickness of 5.2cm and 10.4cm respectively ({lambda}/15 for the lowest working frequency and {lambda}/7.5 for the highest frequency). The designed supercell consists of 16 different unit cells corresponding to 16 eigen frequencies for resonant absorptions. The coupling of multiple resonances leads to broadband absorption effect in the full range of the targeted frequency spectrum. In particular, we propose to combine gradient-change channel and coiled structure to achieve simultaneous impedance matching and minimal occupied space, leading to the ultra-thin thickness of the metasurface absorbers. Our conceived ultra-thin low-frequency broadband absorbers may lead to pragmatic implementations and applications in noise control field.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
