اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSelf-stabilizing laser sails based on optical metasurfaces
228
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
This article investigates the stability of laser sail-style spacecraft constructed from dielectric metasurfaces with areal densities $<$1g/m$^2$. We show that the microscopic optical forces exerted on a metasurface by a high power laser (100 GW) can be engineered to achieve passive self-stabilization, such that it is optically trapped inside the drive beam, and self-corrects against angular and lateral perturbations. The metasurfaces we study consist of a patchwork of beam-steering elements that reflect light at different angles and efficiencies. These properties are varied for each element across the area of the metasurface, and we use optical force modeling tools to explore the behavior of several metasurfaces with different scattering properties as they interact with beams that have different intensity profiles. Finally, we use full-wave numerical simulation tools to extract the actual optical forces that would be imparted on Si/SiO$_{2}$ metasurfaces consisting of more than 400 elements, and we compare those results to our analytical models. We find that under first-order approximations, there are certain metasurface designs that can propel laser-sail-type spacecraft in a stable manner.
قيم البحث
اقرأ أيضاً
We demonstrate in this work that the use of metasurfaces provides a viable strategy to largely tune and enhance near-field radiative heat transfer between extended structures. In particular, using a rigorous coupled wave analysis, we predict that Si-
based metasurfaces featuring two-dimensional periodic arrays of holes can exhibit a room-temperature near-field radiative heat conductance much larger than any unstructured material to date. We show that this enhancement, which takes place in a broad range of separations, relies on the possibility to largely tune the properties of the surface plasmon polaritons that dominate the radiative heat transfer in the near-field regime.
Optical coordinate transformation (OCT) has attracted widespread attention in the field of orbital angular momentum (OAM) (de)multiplexing or manipulation, but the performance of OCT would suffer from its distortion. In this paper, we quantitatively
analyze the distortion of OCT from the perspective of ray optics, and explain its rationality to work under non-normal incident light. For the special case of log-polar coordinate transformation (LPCT), we use a raytracing assisted optimization scheme to improve its distortion, which is related to a Zernike polynomial based phase compensation. After raytracing optimization, the root mean square error (RMSE) of the focused rays is reduced to 1/5 of the original value and the physical optic simulation also shows great improvement. In the experiment, we use three phase masks which are realized by metasurfaces, the measured results show well consistency with the simulation. Results in this paper have great potential to improve the performance of OCT related applications.
Electromagnetic metasurfaces enable the advanced control of surface-wave propagation by spatially tailoring the local surface reactance. Interestingly, tailoring the surface resistance distribution in space provides new, largely unexplored degrees of
freedom. Here, we show that suitable spatial modulations of the surface resistance between positive (i.e., loss) and negative (i.e., gain) values can induce peculiar dispersion effects, far beyond a mere compensation. Taking inspiration from the parity-time symmetry concept in quantum physics, we put forward and explore a class of non-Hermitian metasurfaces that may exhibit extreme anisotropy mainly induced by the gain-loss interplay. Via analytical modeling and full-wave numerical simulations, we illustrate the associated phenomenon of surface-wave canalization, explore nonlocal effects and possible departures from the ideal conditions, and address the feasibility of the required constitutive parameters. Our results suggest intriguing possibilities to dynamically reconfigure the surface-wave propagation, and are of potential interest for applications to imaging, sensing and communications.
We introduce the concept of nonlinear graphene metasurfaces employing the controllable interaction between a graphene layer and a planar metamaterial. Such hybrid metasurfaces support two types of subradiant resonant modes, asymmetric modes of struct
ured metamaterial elements (metamolecules) and graphene plasmons exhibiting strong mutual coupling and avoided dispersion crossing. High tunability of graphene plasmons facilitates strong interaction between the subradiant modes, modifying the spectral position and lifetime of the associated Fano resonances. We demonstrate that strong resonant interaction, combined with the subwavelength localization of plasmons, leads to the enhanced nonlinear response and high efficiency of the second-harmonic generation.
Multilayer metasurfaces (MLMs) represent a versatile type of three-dimensional optical metamaterials that could enable ultra-thin and multi-functional photonic components. Herein we demonstrate an approach to readily fabricate MLMs exploiting a thin
film self-rolling technique. As opposed to standard layer-by-layer approaches, all the metasurfaces are defined within a single nanopatterning step, significantly reducing fabrication time and costs. We realize two MLMs platforms relying on widely used nanopatterning techniques, namely focused ion-beam and electron-beam lithographies. A first example are MLMs comprised of nanohole patterns structured into metal-dielectric seed bilayers. The second platform is comprised of vertical stacks of angled plasmonic nanorod arrays separated by thin dielectric layers. Such angled MLMs exhibit a selective response to circularly polarized light, in agreement with previous works relying on layer-by-layer processes. Our approach can pave the way for the efficient prototyping of novel MLMs, such as devices with varying number of layers and configurations that can be fabricated on a single chip.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
