ﻻ يوجد ملخص باللغة العربية
This paper proposes and demonstrates a PHY-layer design of a real-time prototype that supports Ultra-Reliable Communication (URC) in wireless infrastructure networks. The design makes use of Orthogonal Frequency Division Multiple Access (OFDMA) as a means to achieve URC. Compared with Time-Division Multiple Access (TDMA), OFDMA concentrates the transmit power to a narrower bandwidth, resulting in higher effective SNR. Compared with Frequency-Division Multiple Access (FDMA), OFDMA has higher spectrum efficiency thanks to the smaller subcarrier spacing. Although OFDMA has been introduced in 802.11ax, the purpose was to add flexibility in spectrum usage. Our Reliable OFDMA design, referred to as ROFA, is a clean-slate design with a single goal of ultra-reliable packet delivery. ROFA solves a number of key challenges to ensure the ultra-reliability: (1) a downlink-coordinated time-synchronization mechanism to synchronize the uplink transmission of users, with at most $0.1us$ timing offset; (2) an STF-free packet reception synchronization method that makes use of the property of synchronous systems to avoid packet misdetection; and (3) an uplink precoding mechanism to reduce the CFOs between users and the AP to a negligible level. We implemented ROFA on the Universal Software Radio Peripheral (USRP) SDR platform with real-time signal processing. Extensive experimental results show that ROFA can achieve ultra-reliable packet delivery ($PER<10^5$) with $11.5dB$ less transmit power compared with OFDM-TDMA when they use $3$ and $52$ subcarriers respectively.
Industrial production plants traditionally include sensors for monitoring or documenting processes, and actuators for enabling corrective actions in cases of misconfigurations, failures, or dangerous events. With the advent of the IoT, embedded contr
Wireless sensor networks (WSNs) can be a valuable decision-support tool for farmers. This motivated our deployment of a WSN system to support rain-fed agriculture in India. We defined promising use cases and resolved technical challenges throughout a
To date, model-based reliable communication with low latency is of paramount importance for time-critical wireless control systems. In this work, we study the downlink (DL) controller-to-actuator scheduling problem in a wireless industrial network su
Bandwidth requirements of both wireless and wired clients in access networks continue to increase rapidly, primarily due to the growth of video traffic. Application awareness can be utilized in access networks to optimize quality of experience (QoE)
Smart grid, regarded as the next generation power grid, uses two-way flows of electricity and information to create a widely distributed automated energy delivery network. In this work we present our vision on smart grid from the perspective of wirel