اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدElectrochromism of Ni-deficient nickel oxide -- Theoretical justification
208
0
0.0
(
0
)
تأليف
Igor A. Pav{s}ti
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The development of new electrochromic materials and devices, like smart windows, has an enormous impact on the energy efficiency of modern society. One of the crucial materials in this technology is nickel-oxide. Ni-deficient NiO shows anodic electrochromism whose mechanism is still under debate. Using DFT+U calculations, we show that Ni vacancy generation results in the formation of hole polarons localised at the two oxygens next to the vacancy. Upon Li insertion or injection of an extra electron into Ni-deficient NiO, one hole gets filled, and the hole bipolaron is converted into a hole polaron well-localized at one O atom. Furthermore, the calculated absorption coefficients demonstrate that Li insertion/extraction or rather the addition/removal of an extra electron into Ni-deficient NiO can lead to switching between the oxidized (colored) and the reduced (bleached) states. Hence, our results suggest a new mechanism of Ni-deficient NiO electrochromism not related to the Ni2+/Ni3+ transition but based on the formation and annihilation of hole polarons in oxygen p-states.
قيم البحث
اقرأ أيضاً
We describe the ground- and excited-state electronic structure of bulk MnO and NiO, two prototypical correlated electron materials, using coupled cluster theory with single and double excitations (CCSD). As a corollary, this work also reports the fir
st implementation of unrestricted periodic ab initio equation-of motion CCSD. Starting from a Hartree-Fock reference, we find fundamental gaps of 3.46 eV and 4.83 eV for MnO and NiO respectively for the 16 unit supercell, slightly overestimated compared to experiment, although finite-size scaling suggests that the gap is more severely overestimated in the thermodynamic limit. From the character of the correlated electronic bands we find both MnO and NiO to lie in the intermediate Mott/charge-transfer insulator regime, although NiO appears as a charge transfer insulator when only the fundamental gap is considered. While the lowest quasiparticle excitations are of metal 3d and O 2p character in most of the Brillouin zone, near the {Gamma} point, the lowest conduction band quasiparticles are of s character. Our study supports the potential of coupled cluster theory to provide high level many-body insights into correlated solids.
We report an experimental and theoretical analysis of the sqrt(3)x sqrt(3)-R30 and 2x2 reconstructions on the NiO (111) surface combining transmission electron microscopy, x-ray photoelectron spectroscopy, and reasonably accurate density functional c
alculations using the meta-GGA hybrid functional TPSSh. While the main focus here is on the surface structure, we also observe an unusual step morphology with terraces containing only even numbers of unit cells during annealing of the surfaces. The experimental data clearly shows that the surfaces contain significant coverage of hydroxyl terminations, and the surface structures are essentially the same as those reported on the MgO (111) surface implying an identical kinetically-limited water-driven structural transition pathway. The octapole structure can therefore be all but ruled out for single crystals of NiO annealed in or transported through humid air. . The theoretical analysis indicates, as expected, that simple density functional theory methods for such strongly-correlated oxide surfaces are marginal, while better consideration of the metal d-electrons has a large effect although, it is still not perfect.
The physics of mutual interaction of phonon quasiparticles with electronic spin degrees of freedom, leading to unusual transport phenomena of spin and heat, has been a subject of continuing interests for decades. Understanding phonon properties in th
e context of spin-phonon coupling is essential for engineering functional phononic and spintronic devices. By means of inelastic neutron scattering and first-principle calculations, anomalous scattering spectral intensity from acoustic phonon was identified in the exemplary collinear antiferromagnetic nickel (II) oxide, unveiling strong correlations between spin and lattice degrees of freedom that renormalize the polarization of acoustic phonon. Anomalously large spectral intensity from acoustic phonons observed at small momentum transfer decays with increasing temperature and is successfully modeled with a modified magneto-vibrational scattering cross section, suggesting the presence of phonon driven of spin precession. On the other hand, TA phonon intensity that are forbidden by the scattering geometry is observed at a wide span of momentum transfer, suggesting a renormalization of phonon eigenvector.
On highly oxygen deficient thin films of hafnium oxide (hafnia, HfO$_{2-x}$) contaminated with adsorbates of carbon oxides, the formation of hafnium carbide (HfC$_x$) at the surface during vacuum annealing at temperatures as low as 600 {deg}C is repo
rted. Using X-ray photoelectron spectroscopy the evolution of the HfC$_x$ surface layer related to a transformation from insulating into metallic state is monitored in situ. In contrast, for fully stoichiometric HfO$_2$ thin films prepared and measured under identical conditions, the formation of HfC$_x$ was not detectable suggesting that the enhanced adsorption of carbon oxides on oxygen deficient films provides a carbon source for the carbide formation. This shows that a high concentration of oxygen vacancies in carbon contaminated hafnia lowers considerably the formation energy of hafnium carbide. Thus, the presence of a sufficient amount of residual carbon in resistive random access memory devices might lead to a similar carbide formation within the conducting filaments due to Joule heating.
In this study, the characteristics of nickel thin film deposited by remote plasma atomic layer deposition (RPALD) on p-type Si substrate and formation of nickel silicide using rapid thermal annealing were determined. Bis(1,4-di-isopropyl-1,3-diazabut
adienyl)nickel, Ni(iPr-DAD)2, was used as a Ni precursor and ammonia plasma was used as a reactant. This was the first attempt to deposit Ni thin film using Ni(iPr-DAD)2 as a precursor for the ALD process. The RPALD Ni film was deposited with a growth rate of around 2.2{AA}/cycle at 250 {deg}C and showed significant low resistivity of 33 {mu}{Omega}cm with a total impurity concentration of around 10 at. %.The impurities of the thin film, carbon and nitrogen, were existent by the forms of C-C and C-N in a bonding state. The impurities removal tendency was investigated by comparing of experimental conditions, namely process temperature and pressure. Nitrogen impurity was removed by thermal desorption during each ALD cycle and carbon impurity was reduced by the optimizing of the process pressure which is directly related with a mean free path of NH3 plasma. After Ni deposition, nickel silicide was formed by RTA in a vacuum ambient for 1 minute. A nickel silicide layer from ALD Ni and PVD Ni was compared at the annealing temperature from 500 to 900 {deg}C. NiSi from ALD Ni showed better thermal stability due to the contribution of small amounts of carbon and nitrogen in the asdeposited Ni thin film. Degradation of the silicide layer was effectively suppressed with a use of ALD Ni.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
