ترغب بنشر مسار تعليمي؟ اضغط هنا

An exchange-based surface-code quantum computer architecture in silicon

87   0   0.0 ( 0 )
 نشر من قبل Muhammad Usman
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Phosphorus donor spins in silicon offer a number of promising characteristics for the implementation of robust qubits. Amongst various concepts for scale-up, the shared-control concept takes advantage of 3D scanning tunnelling microscope (STM) fabrication techniques to minimise the number of control lines, allowing the donors to be placed at the pitch limit of $geq$30 nm, enabling dipole interactions. A fundamental challenge is to exploit the faster exchange interaction, however, the donor spacings required are typically 15 nm or less, and the exchange interaction is notoriously sensitive to lattice site variations in donor placement. This work presents a proposal for a fast exchange-based surface-code quantum computer architecture which explicitly addresses both donor placement imprecision commensurate with the atomic-precision fabrication techniques and the stringent qubit pitch requirements. The effective pitch is extended by incorporation of an intermediate donor acting as an exchange-interaction switch. We consider both global control schemes and a scheduled series of operations by designing GRAPE pulses for individual CNOTs based on coupling scenarios predicted by atomistic tight-binding simulations. The architecture is compatible with the existing fabrication capabilities and may serve as a blueprint for the experimental implementation of a full-scale fault-tolerant quantum computer based on donor impurities in silicon.



قيم البحث

اقرأ أيضاً

Spin qubits in silicon quantum dots are one of the most promising building blocks for large scale quantum computers thanks to their high qubit density and compatibility with the existing semiconductor technologies. High fidelity single-qubit gates ex ceeding the threshold of error correction codes like the surface code have been demonstrated, while two-qubit gates have reached 98% fidelity and are improving rapidly. However, there are other types of error --- such as charge leakage and propagation --- that may occur in quantum dot arrays and which cannot be corrected by quantum error correction codes, making them potentially damaging even when their probability is small. We propose a surface code architecture for silicon quantum dot spin qubits that is robust against leakage errors by incorporating multi-electron mediator dots. Charge leakage in the qubit dots is transferred to the mediator dots via charge relaxation processes and then removed using charge reservoirs attached to the mediators. A stabiliser-check cycle, optimised for our hardware, then removes the correlations between the residual physical errors. Through simulations we obtain the surface code threshold for the charge leakage errors and show that in our architecture the damage due to charge leakage errors is reduced to a similar level to that of the usual depolarising gate noise. Spin leakage errors in our architecture are constrained to only ancilla qubits and can be removed during quantum error correction via reinitialisations of ancillae, which ensure the robustness of our architecture against spin leakage as well. Our use of an elongated mediator dots creates spaces throughout the quantum dot array for charge reservoirs, measuring devices and control gates, providing the scalability in the design.
Recent advances in quantum error correction (QEC) codes for fault-tolerant quantum computing cite{Terhal2015} and physical realizations of high-fidelity qubits in a broad range of platforms cite{Kok2007, Brown2011, Barends2014, Waldherr2014, Dolde201 4, Muhonen2014, Veldhorst2014} give promise for the construction of a quantum computer based on millions of interacting qubits. However, the classical-quantum interface remains a nascent field of exploration. Here, we propose an architecture for a silicon-based quantum computer processor based entirely on complementary metal-oxide-semiconductor (CMOS) technology, which is the basis for all modern processor chips. We show how a transistor-based control circuit together with charge-storage electrodes can be used to operate a dense and scalable two-dimensional qubit system. The qubits are defined by the spin states of a single electron confined in a quantum dot, coupled via exchange interactions, controlled using a microwave cavity, and measured via gate-based dispersive readout cite{Colless2013}. This system, based entirely on available technology and existing components, is compatible with general surface code quantum error correction cite{Terhal2015}, enabling large-scale universal quantum computation.
The most promising quantum algorithms require quantum processors hosting millions of quantum bits when targeting practical applications. A major challenge towards large-scale quantum computation is the interconnect complexity. In current solid-state qubit implementations, a major bottleneck appears between the quantum chip in a dilution refrigerator and the room temperature electronics. Advanced lithography supports the fabrication of both CMOS control electronics and qubits in silicon. When the electronics are designed to operate at cryogenic temperatures, it can ultimately be integrated with the qubits on the same die or package, overcoming the wiring bottleneck. Here we report a cryogenic CMOS control chip operating at 3K, which outputs tailored microwave bursts to drive silicon quantum bits cooled to 20mK. We first benchmark the control chip and find electrical performance consistent with 99.99% fidelity qubit operations, assuming ideal qubits. Next, we use it to coherently control actual silicon spin qubits and find that the cryogenic control chip achieves the same fidelity as commercial instruments. Furthermore, we highlight the extensive capabilities of the control chip by programming a number of benchmarking protocols as well as the Deutsch-Josza algorithm on a two-qubit quantum processor. These results open up the path towards a fully integrated, scalable silicon-based quantum computer.
The surface code is currently the primary proposed method for performing quantum error correction. However, despite its many advantages, it has no native method to fault-tolerantly apply non-Clifford gates. Additional techniques are therefore require d to achieve universal quantum computation. Here we propose a hybrid scheme which uses small islands of a qudit variant of the surface code to enhance the computational power of the standard surface code. This allows the non-trivial action of the non-Abelian anyons in the former to process information stored in the latter. Specifically, we show that a non-stabilizer state can be prepared, which allows universality to be achieved.
Quantum gates between spin qubits can be implemented leveraging the natural Heisenberg exchange interaction between two electrons in contact with each other. This interaction is controllable by electrically tailoring the overlap between electronic wa vefunctions in quantum dot systems, as long as they occupy neighbouring dots. An alternative route is the exploration of superexchange - the coupling between remote spins mediated by a third idle electron that bridges the distance between quantum dots. We experimentally demonstrate direct exchange coupling and provide evidence for second neighbour mediated superexchange in a linear array of three single-electron spin qubits in silicon, inferred from the electron spin resonance frequency spectra. We confirm theoretically through atomistic modeling that the device geometry only allows for sizeable direct exchange coupling for neighbouring dots, while next nearest neighbour coupling cannot stem from the vanishingly small tail of the electronic wavefunction of the remote dots, and is only possible if mediated.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا