ترغب بنشر مسار تعليمي؟ اضغط هنا

Towards Scalable and Channel-Robust Radio Frequency Fingerprint Identification for LoRa

101   0   0.0 ( 0 )
 نشر من قبل Guanxiong Shen
 تاريخ النشر 2021
  مجال البحث هندسة إلكترونية
والبحث باللغة English




اسأل ChatGPT حول البحث

Radio frequency fingerprint identification (RFFI) is a promising device authentication technique based on the transmitter hardware impairments. In this paper, we propose a scalable and robust RFFI framework achieved by deep learning powered radio frequency fingerprint (RFF) extractor. Specifically, we leverage the deep metric learning to train an RFF extractor, which has excellent generalization ability and can extract RFFs from previously unseen devices. Any devices can be enrolled via the pre-trained RFF extractor and the RFF database can be maintained efficiently for allowing devices to join and leave. Wireless channel impacts the RFF extraction and is tackled by exploiting channel independent feature and data augmentation. We carried out extensive experimental evaluation involving 60 commercial off-the-shelf LoRa devices and a USRP N210 software defined radio platform. The results have successfully demonstrated that our framework can achieve excellent generalization abilities for device classification and rogue device detection as well as effective channel mitigation.



قيم البحث

اقرأ أيضاً

Radio frequency fingerprint identification (RFFI) is an emerging device authentication technique that relies on intrinsic hardware characteristics of wireless devices. We designed an RFFI scheme for Long Range (LoRa) systems based on spectrogram and convolutional neural network (CNN). Specifically, we used spectrogram to represent the fine-grained time-frequency characteristics of LoRa signals. In addition, we revealed that the instantaneous carrier frequency offset (CFO) is drifting, which will result in misclassification and significantly compromise the system stability; we demonstrated CFO compensation is an effective mitigation. Finally, we designed a hybrid classifier that can adjust CNN outputs with the estimated CFO. The mean value of CFO remains relatively stable, hence it can be used to rule out CNN predictions whose estimated CFO falls out of the range. We performed experiments in real wireless environments using 20 LoRa devices under test (DUTs) and a Universal Software Radio Peripheral (USRP) N210 receiver. By comparing with the IQ-based and FFT-based RFFI schemes, our spectrogram-based scheme can reach the best classification accuracy, i.e., 97.61% for 20 LoRa DUTs.
107 - Jiabao Yu , Aiqun Hu , Fen Zhou 2019
Radio Frequency Fingerprinting (RFF) is one of the promising passive authentication approaches for improving the security of the Internet of Things (IoT). However, with the proliferation of low-power IoT devices, it becomes imperative to improve the identification accuracy at low SNR scenarios. To address this problem, this paper proposes a general Denoising AutoEncoder (DAE)-based model for deep learning RFF techniques. Besides, a partially stacking method is designed to appropriately combine the semi-steady and steady-state RFFs of ZigBee devices. The proposed Partially Stacking-based Convolutional DAE (PSC-DAE) aims at reconstructing a high-SNR signal as well as device identification. Experimental results demonstrate that compared to Convolutional Neural Network (CNN), PSCDAE can improve the identification accuracy by 14% to 23.5% at low SNRs (from -10 dB to 5 dB) under Additive White Gaussian Noise (AWGN) corrupted channels. Even at SNR = 10 dB, the identification accuracy is as high as 97.5%.
347 - Qihao Zhou , Jinyu Xing , Lu Hou 2019
Long Range (LoRa) has become one of the most popular Low Power Wide Area (LPWA) technologies, which provides a desirable trade-off among communication range, battery life, and deployment cost. In LoRa networks, several transmission parameters can be allocated to ensure efficient and reliable communication. For example, the configuration of the spreading factor allows tuning the data rate and the transmission distance. However, how to dynamically adjust the setting that minimizes the collision probability while meeting the required communication performance is an open challenge. This paper proposes a novel Data Rate and Channel Control (DRCC) scheme for LoRa networks so as to improve wireless resource utilization and support a massive number of LoRa nodes. The scheme estimates channel conditions based on the short-term Data Extraction Rate (DER), and opportunistically adjusts the spreading factor to adapt the variation of channel conditions. Furthermore, the channel control is carried out to balance the link load of all available channels with the global information of the channel usage, which is able to lower the access collisions under dense deployments. Our experiments demonstrate that the proposed DRCC performs well on improving the reliability and capacity compared with other spreading factor allocation schemes in dense deployment scenarios.
135 - Shuchao Jiang 2020
For massive machine-type communications, centralized control may incur a prohibitively high overhead. Grant-free non-orthogonal multiple access (NOMA) provides possible solutions, yet poses new challenges for efficient receiver design. In this paper, we develop a joint user identification, channel estimation, and signal detection (JUICESD) algorithm. We divide the whole detection scheme into two modules: slot-wise multi-user detection (SMD) and combined signal and channel estimation (CSCE). SMD is designed to decouple the transmissions of different users by leveraging the approximate message passing (AMP) algorithms, and CSCE is designed to deal with the nonlinear coupling of activity state, channel coefficient and transmit signal of each user separately. To address the problem that the exact calculation of the messages exchanged within CSCE and between the two modules is complicated due to phase ambiguity issues, this paper proposes a rotationally invariant Gaussian mixture (RIGM) model, and develops an efficient JUICESD-RIGM algorithm. JUICESD-RIGM achieves a performance close to JUICESD with a much lower complexity. Capitalizing on the feature of RIGM, we further analyze the performance of JUICESD-RIGM with state evolution techniques. Numerical results demonstrate that the proposed algorithms achieve a significant performance improvement over the existing alternatives, and the derived state evolution method predicts the system performance accurately.
We consider the vector perturbation (VP) precoder design for multiuser multiple-input single output (MU-MISO) broadcast channel systems which is robust to power scaling factor errors. VP precoding has so far been developed and analyzed under the assu mption that receivers could have known the power scaling factor in advance of tranmission perfectly, which is hard to obtain due to the large dynamic range and limited feedforward. However, as demonstrated in our results the performance of VP precoding is quite sensitive to the accuracy of power scaling factor and always encounter an error floor at mid to high signal-to-noise ratio (SNR) regimes. Motivated by such observations, we propose a robust VP precoder based on the minimum mean square error (MMSE) criterion. Simulation results show that, the robust VP precoder outperforms conventional VP precoding designs, as less sensitive to power scaling factor errors.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا