اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSARAS CD/EoR Radiometer: Design and performance of the Digital Correlation Spectrometer
87
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In the currently accepted model for cosmic baryon evolution, Cosmic Dawn and the Epoch of Reionization are significant times when first light from the first luminous objects emerged, transformed and subsequently ionized the primordial gas. The 21 cm hyperfine transition of neutral hydrogen, redshifted from these cosmic times to a frequency range of 40 to 200 MHz, has been recognized as an important probe of the physics of CD/EoR. The global 21-cm signal is predicted to be a spectral distortion of a few 10s to a few 100s of mK, which is expected to be present in the cosmic radio background as a trace additive component. SARAS, Shaped Antenna measurement of the background RAdio Spectrum, is a spectral radiometer purpose designed to detect the weak 21-cm signal from CD/EoR. An important subsystem of the radiometer, the digital correlation spectrometer, is developed around a high speed digital signal processing platform called pSPEC. pSPEC is built around two quad 10 bit analog-to-digital converters and a Virtex 6 field programmable gate array, with provision for multiple Gigabit Ethernet and 4.5 Gbps fibre optic interfaces. Here we describe the system design of the digital spectrometer, the pSPEC board, and the adaptation of pSPEC to implement a high spectral resolution of about 61 kHz, high dynamic range correlation spectrometer covering the entire CD/EoR band. As the SARAS radiometer is required to be deployed in remote locations where terrestrial radio frequency interference is a minimum, the spectrometer is designed to be compact, portable and operating off internal batteries. The paper includes an evaluation of the spectrometers susceptibility to radio frequency interference and capability to detect signals from CD/EoR.
قيم البحث
اقرأ أيضاً
SARAS is an ongoing experiment aiming to detect the redshifted global 21-cm signal expected from Cosmic Dawn (CD) and the Epoch of Reionization (EoR). Standard cosmological models predict the signal to be present in the redshift range $z sim $6--35,
corresponding to a frequency range 40--200~MHz, as a spectral distortion of amplitude 20--200~mK in the 3~K cosmic microwave background. Since the signal might span multiple octaves in frequency, and this frequency range is dominated by strong terrestrial Radio Frequency Interference (RFI) and astrophysical foregrounds of Galactic and Extragalactic origin that are several orders of magnitude greater in brightness temperature, design of a radiometer for measurement of this faint signal is a challenging task. It is critical that the instrumental systematics do not result in additive or multiplicative confusing spectral structures in the measured sky spectrum and thus preclude detection of the weak 21-cm signal. Here we present the system design of the SARAS~3 version of the receiver. New features in the evolved design include Dicke switching, double differencing and optical isolation for improved accuracy in calibration and rejection of additive and multiplicative systematics. We derive and present the measurement equations for the SARAS~3 receiver configuration and calibration scheme, and provide results of laboratory tests performed using various precision terminations that qualify the performance of the radiometer receiver for the science goal.
Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets, and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits ar
e dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement instrumental uncertainty of order 10 cm/s. Achieving such extraordinary precision on a high-resolution spectrometer requires thermo-mechanically stabilizing the instrument to unprecedented levels. Here, we describe the Environment Control System (ECS) of the NEID Spectrometer, which will be commissioned on the 3.5 m WIYN Telescope at Kitt Peak National Observatory in 2019, and has a performance specification of on-sky RV precision < 50 cm/s. Because NEIDs optical table and mounts are made from aluminum, which has a high coefficient of thermal expansion, sub-milliKelvin temperature control is especially critical. NEID inherits its ECS from that of the Habitable-zone Planet Finder (HPF), but with modifications for improved performance and operation near room temperature. Our full-system stability test shows the NEID system exceeds the already impressive performance of HPF, maintaining vacuum pressures below $10^{-6}$ Torr and an RMS temperature stability better than 0.4 mK over 30 days. Our ECS design is fully open-source; the design of our temperature-controlled vacuum chamber has already been made public, and here we release the electrical schematics for our custom Temperature Monitoring and Control (TMC) system.
The global 21 cm signal from Cosmic Dawn (CD) and the Epoch of Reionization (EoR), at redshifts $z sim 6-30$, probes the nature of first sources of radiation as well as physics of the Inter-Galactic Medium (IGM). Given that the signal is predicted to
be extremely weak, of wide fractional bandwidth, and lies in a frequency range that is dominated by Galactic and Extragalactic foregrounds as well as Radio Frequency Interference, detection of the signal is a daunting task. Critical to the experiment is the manner in which the sky signal is represented through the instrument. It is of utmost importance to design a system whose spectral bandpass and additive spurious can be well calibrated and any calibration residual does not mimic the signal. SARAS is an ongoing experiment that aims to detect the global 21 cm signal. Here we present the design philosophy of the SARAS 2 system and discuss its performance and limitations based on laboratory and field measurements. Laboratory tests with the antenna replaced with a variety of terminations, including a network model for the antenna impedance, show that the gain calibration and modeling of internal additives leave no residuals with Fourier amplitudes exceeding 2~mK, or residual Gaussians of 25 MHz width with amplitudes exceeding 2~mK. Thus, even accounting for reflection and radiation efficiency losses in the antenna, the SARAS~2 system is capable of detection of complex 21-cm profiles at the level predicted by currently favoured models for thermal baryon evolution.
The cold neutron multiplexing secondary spectrometer CAMEA (Continuous Angle Multiple Energy Analysis) was commissioned at the Swiss spallation neutron source SINQ at the Paul Scherrer Institut at the end of 2018. The spectrometer is optimised for an
efficient data collection in the horizontal scattering plane, allowing for detailed and rapid mapping of excitations under extreme conditions. The novel design consists of consecutive, upward scattering analyzer arcs underneath an array of position sensitive detectors mounted inside a low permeability stainless-steel vacuum vessel. The construction of the worlds first continuous angle multiple energy analysis instrument required novel solutions to many technical challenges, including analyzer mounting, vacuum connectors, and instrument movement. These were solved by extensive prototype experiments and in-house developments. Here we present a technical overview of the spectrometer describing in detail the engineering solutions and present our first experimental data taken during the commissioning. Our results demonstrate the tremendous gains in data collection rate for this novel type of spectrometer design.
The Large-Aperture Experiment to Detect the Dark Age (LEDA) was designed to detect the predicted O(100)mK sky-averaged absorption of the Cosmic Microwave Background by Hydrogen in the neutral pre- and intergalactic medium just after the cosmological
Dark Age. The spectral signature would be associated with emergence of a diffuse Ly$alpha$ background from starlight during Cosmic Dawn. Recently, Bowman et al. (2018) have reported detection of this predicted absorption feature, with an unexpectedly large amplitude of 530 mK, centered at 78 MHz. Verification of this result by an independent experiment, such as LEDA, is pressing. In this paper, we detail design and characterization of the LEDA radiometer systems, and a first-generation pipeline that instantiates a signal path model. Sited at the Owens Valley Radio Observatory Long Wavelength Array, LEDA systems include the station correlator, five well-separated redundant dual polarization radiometers and backend electronics. The radiometers deliver a 30-85MHz band (16<z<34) and operate as part of the larger interferometric array, for purposes ultimately of in situ calibration. Here, we report on the LEDA system design, calibration approach, and progress in characterization as of January 2016. The LEDA systems are currently being modified to improve performance near 78 MHz in order to verify the purported absorption feature.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
