اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOptimizing Discrete Multi-tone Transmission for 400G Data Center Interconnects
81
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Discrete multi-tone transmission (DMT) is a promising candidate for future 400G data center interconnects. Eight channels, each carrying 56 Gb/s of data can be combined in a 50-GHz channel grid to form a 400 Gb/s superchannel. For a fully loaded 96 channel DWDM system this leads to a total capacity of 4.8 Tb/s. To meet the requirements of the targeted application in terms of cost efficiency and low power consumption, it is important to keep the complexity for the digital signal processing as low as possible. For DMT, the complexity is mainly determined by the length of the fast Fourier transformation (FFT). Since data center interconnects only have to bridge a distance of typically 80 km, we here investigate among other parameters the influence of the FFT length among other parameters on the achievable performance for 56 Gb/s DMT only for this distance. Transmission is performed in C-band to enable DWDM and no optical dispersion compensation is applied. We consider double sideband (DSB) as well as vestigial sideband (VSB) DMT. It can be seen that an FFT length of 128 is sufficient to reach the required performance in terms of bit error ratio, however, a higher length can significantly improve the performance.
قيم البحث
اقرأ أيضاً
We review three solutions for low-cost data center interconnects with a target reach of up to 80 km. Directly detected DMT, PAM-4 and multi-band CAP are promising modulation schemes, enabling 400 Gbit/s by combining eight channels of 56 Gbit/s.
We review some currently discussed solutions for 400 Gbit/s inter-data center WDM transmission for up to 100 km. We focus on direct detected solutions, namely PAM4 and DMT, and present two WDM systems based on these formats.
In this paper, we formulate the collaborative multi-user wireless video transmission problem as a multi-user Markov decision process (MUMDP) by explicitly considering the users heterogeneous video traffic characteristics, time-varying network conditi
ons and the resulting dynamic coupling between the wireless users. These environment dynamics are often ignored in existing multi-user video transmission solutions. To comply with the decentralized nature of wireless networks, we propose to decompose the MUMDP into local MDPs using Lagrangian relaxation. Unlike in conventional multi-user video transmission solutions stemming from the network utility maximization framework, the proposed decomposition enables each wireless user to individually solve its own dynamic cross-layer optimization (i.e. the local MDP) and the network coordinator to update the Lagrangian multipliers (i.e. resource prices) based on not only current, but also future resource needs of all users, such that the long-term video quality of all users is maximized. However, solving the MUMDP requires statistical knowledge of the experienced environment dynamics, which is often unavailable before transmission time. To overcome this obstacle, we then propose a novel online learning algorithm, which allows the wireless users to update their policies in multiple states during one time slot. This is different from conventional learning solutions, which often update one state per time slot. The proposed learning algorithm can significantly improve the learning performance, thereby dramatically improving the video quality experienced by the wireless users over time. Our simulation results demonstrate the efficiency of the proposed MUMDP framework as compared to conventional multi-user video transmission solutions.
We demonstrate up to 12 km, 56 Gb/s DMT transmission using high-speed VCSELs in the 1.5 um wavelength range for future 400Gb/s intra-data center connects, enabled by vestigial sideband filtering of the transmit signal.
Reconfigurable intelligent surfaces (RISs) are one of the foremost technological enablers of future wireless systems. They improve communication and localization by providing a strong non-line-of-sight path to the receiver. In this paper, we propose
a pilot transmission method to enable the receiver to separate signals arriving from different RISs and from the uncontrolled multipath. This facilitates channel estimation and localization, as the channel or its geometric parameters can be estimated for each path separately. Our method is based on designing temporal phase profiles that are orthogonal across RISs without affecting the RIS beamforming capabilities. We take into consideration the limited resolution of the RIS phase shifters and show that in the presence of this practical limitation, orthogonal phase profiles can be designed based on Butson-type Hadamard matrices. For a localization scenario, we show that with our proposed method the estimator can attain the theoretical lower bound even with one-bit RIS phase resolution.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
