اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMolecular dynamics simulation of crack growth in mono-crystal nickel with voids and inclusions
128
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this study, the crack propagation of the pre-cracked mono-crystal nickel with the voids and inclusions has been investigated by molecular dynamics simulations. Different sizes of voids, inclusions and materials of inclusions are used to fully study the effect of the voids and inclusions during the crack propagation process. The dislocations evolution, stress distribution and crack length are analyzed as the associated mechanical properties. The results indicate that the voids and inclusions can change the path of crack propagation of the pre-cracked mono-crystal nickel. Moreover, the results show that the voids and inclusions can lead a better resistance to plastic deformation of the mono-crystal and the inclusions can make the system more difficult to fracture.
قيم البحث
اقرأ أيضاً
The melting and crystallization of Al50Ni50} are studied by means of molecular dynamics computer simulations, using a potential of the embedded atom type to model the interactions between the particles. Systems in a slab geometry are simulated where
the B2 phase of AlNi in the middle of an elongated simulation box is separated by two planar interfaces from the liquid phase, thereby considering the (100) crystal orientation. By determining the temperature dependence of the interface velocity, an accurate estimate of the melting temperature is provided. The value k=0.0025 m/s/K for the kinetic growth coefficient is found. This value is about two orders of magnitude smaller than that found in recent simulation studies of one-component metals. The classical Wilson-Frenkel model is not able to describe the crystal growth kinetics on a quantitative level. We argue that this is due to the neglect of diffusion processes in the liquid-crystal interface.
The mobility of polymer chains in perfect polyethylene (PE) crystal was calculated as a function of temperature and chain length through Molecular dynamics (MD) in united atom approximation. The results demonstrate that the chain mobility drastically
increases in the vicinity of the phase transition from the orthorhombic to quasi-hexagonal phase. In the quasi-hexagonal phase, the chain mobility is almost independent on temperature and inversely proportional to the chain length.
A high fidelity multi-physics Eulerian computational framework is presented for the simulation of supersonic parachute inflation during Mars landing. Unlike previous investigations in this area, the framework takes into account an initial folding pat
tern of the parachute, the flow compressibility effect on the fabric material porosity, and the interactions between supersonic fluid flows and the suspension lines. Several adaptive mesh refinement (AMR)-enabled, large edge simulation (LES)-based, simulations of a full-size disk-gap-band (DGB) parachute inflating in the low-density, low-pressure, carbon dioxide (CO2) Martian atmosphere are reported. The comparison of the drag histories and the first peak forces between the simulation results and experimental data collected during the NASA Curiosity Rovers Mars atmospheric entry shows reasonable agreements. Furthermore, a rudimentary material failure analysis is performed to provide an estimate of the safety factor for the parachute decelerator system. The proposed framework demonstrates the potential of using Computational Fluid Dynamics (CFD) and Fluid-Structure Interaction (FSI)-based simulation tools for future supersonic parachute design.
Primary {gamma} phase instead of carbides and borides plays an important role in suppressing grain growth during solution at 1433K of FGH98 nickel-based polycrystalline alloys. Results illustrate that as-fabricated FGH98 has equiaxed grain structure
and after heat treatment, grains remain equiaxed but grow larger. In order to clarify the effects of the size and volume fraction of the primary {gamma} phase on the grain growth during heat treatment, this paper establish a 2D Cellular Automata (CA) model based on the thermal activation and the lowest energy principle. The CA results are compared with the experimental results and show a good fit with an error less than 10%. Grain growth kinetics are depicted and simulations in real time for various sizes and volume fractions of primary {gamma} particles work out well with the Zener relation. The coefficient n value in Zener relation is theoretically calculated and its minimum value is 0.23 when the radius of primary {gamma} is 2.8{mu}m.
We show that for the simulation of crack propagation in quasi-brittle, two-dimensional solids, very good results can be obtained with an embedded strong discontinuity quadrilateral finite element that has incompatible modes. Even more importantly, we
demonstrate that these results can be obtained without using a crack tracking algorithm. Therefore, the simulation of crack patterns with several cracks, including branching, becomes possible. The avoidance of a tracking algorithm is mainly enabled by the application of a novel, local (Gauss-point based) criterion for crack nucleation, which determines the time of embedding the localisation line as well as its position and orientation. We treat the crack evolution in terms of a thermodynamical framework, with softening variables describing internal dissipative mechanisms of material degradation. As presented by numerical examples, many elements in the mesh may develop a crack, but only some of them actually open and/or slide, dissipate fracture energy, and eventually form the crack pattern. The novel approach has been implemented for statics and dynamics, and the results of computed difficult examples (including Kalthoffs test) illustrate its very satisfying performance. It effectively overcomes unfavourable restrictions of the standard embedded strong discontinuity formulations, namely the simulation of the propagation of a single crack only. Moreover, it is computationally fast and straightforward to implement. Our numerical solutions match the results of experimental tests and previously reported numerical results in terms of crack pattern, dissipated fracture energy, and load-displacement curve.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
