اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدUltra-thin Underwater Acoustic Metasurface with Multiply Resonant Units
92
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
This paper describes a new kind of acoustic metasurface with multiply resonant units, which have previously been used to induce multiple resonances and effectively produce negative mass density and bulk/shear moduli. The proposed acoustic metasurface can be constructed using real materials and does not rely on an ideal rigid material. Therefore, it can work well in a water background. The thickness of the acoustic metasurface is about two orders of magnitude smaller than the acoustic wavelength in water. The design of a unit group is proposed to avoid the phase discretization becoming too fine in such a long-wavelength condition. We demonstrate that the proposed acoustic metasurface achieves good performance in anomalous reflection, focusing, and carpet cloaking.
قيم البحث
اقرأ أيضاً
We theoretically and experimentally propose two designs of broadband low-frequency acoustic metasurface absorbers (Sample I/Sample II) for the frequency ranges of 458Hz~968Hz and 231Hz~491Hz (larger than 1 octave), with absorption larger than 0.8, an
d having the ultra-thin thickness of 5.2cm and 10.4cm respectively ({lambda}/15 for the lowest working frequency and {lambda}/7.5 for the highest frequency). The designed supercell consists of 16 different unit cells corresponding to 16 eigen frequencies for resonant absorptions. The coupling of multiple resonances leads to broadband absorption effect in the full range of the targeted frequency spectrum. In particular, we propose to combine gradient-change channel and coiled structure to achieve simultaneous impedance matching and minimal occupied space, leading to the ultra-thin thickness of the metasurface absorbers. Our conceived ultra-thin low-frequency broadband absorbers may lead to pragmatic implementations and applications in noise control field.
In this work, we develop the gradient metasurface is constructed of a locally anisotropic resonant structure, comprising a steel cylinder with an elliptical rubber coating embedded in epoxy. The deflective angles of rubber ellipses in the locally ani
sotropic resonant unit provide a method of controlling the reflected phase. Phase shifts of the reflected wave can cover the 2pi range. With an appropriate design of the phase profiles along the acoustic metasurface, we can achieve anomalous reflection and Bessel beam. The locally anisotropic resonant units have significant potential for engineering and manipulating acoustic wavefronts
Metasurfaces with planar profile and wave front shaping capabilities would be ideally suitable to improve the performance of acoustic wave-based applications. It is significant that the general Snells law provides a new approach to engineer the phase
profile of reflected acoustic wave. Here, we present a new type of acoustic metasurface based on three-component composites which contain a steel ball coated with a thin elliptical layer of silicone rubber and embedded in epoxy. The acoustic metasurface with changeable radii of steel balls can realize the anomalous reflections, a planar acoustic lens through designed gradient phase profile. The acoustic metasurface contained with elaborately selected three-component composites, as a skin cloak, successfully achieve the acoustical invisibility.
We introduce a multi-coiled acoustic metasurface providing a quasi-perfect absorption (reaching 99.99% in experiments) at extremely low-frequency of 50 Hz, and simultaneously featuring an ultrathin thickness down to {lambda}/527 (1.3 cm). In contrast
to the state of the art, this original conceived multi-coiled metasurface offers additional degrees of freedom capable to tune the acoustic impedance effectively without increasing the total thickness. We provide analytical derivation, numerical simulation and experimental demonstrations for this unique absorber concept, and discuss its physical mechanism which breaks the quarter-wavelength resonator theory. Furthermore, based on the same conceptual approach, we propose a broadband lowfrequency metasurface absorber by coupling unit cells exhibiting different properties.
A broadband sound absorption attained by a deep-subwavelength structure is of great interest to the noise control community especially for extremely low frequencies (20-100 Hz) in room acoustics. Coupling multiple different resonant unit cells has be
en an effective strategy to achieve a broadband sound absorption. In this paper, we report on an analytical, numerical and experimental study of a low-frequency broadband (50-63 Hz, one third octave band), high absorption (average absorption coefficient around 93%), near-omnidirectional (0{deg}-75{deg}) acoustic metasurface absorber composed of 4 coupled unit cells at a thickness of 15.4 cm (1/45 of the wavelength at 50 Hz). The absorption by such a deep-subwavelength structure occurs due to a strong coupling between unit cells, which is realized by carefully engineering geometric parameters of each unit cell, especially the judicious assignment of lateral size to each unit cell. To further broaden the bandwidth (50-100 Hz, one octave band), a design with 19 unit cells coupled in a supercell is analytically studied to achieve an average absorption coefficient of 85% for a wide angle range (0{deg}-75{deg}) at a thickness of 20 cm (1/34 of wavelength at 50 Hz). Two additional degrees of freedom, the lateral size of supercell and the number of unit cells in the supercell, are demonstrated to facilitate such a causally optimal design which is close to the ideally causal optimality. The proposed design methodology may solve the long-standing issue for low frequency absorption in room acoustics.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
