ترغب بنشر مسار تعليمي؟ اضغط هنا

The LOFAR Multifrequency Snapshot Sky Survey (MSSS) I. Survey description and first results

235   0   0.0 ( 0 )
 نشر من قبل George Heald
 تاريخ النشر 2015
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

We present the Multifrequency Snapshot Sky Survey (MSSS), the first northern-sky LOFAR imaging survey. In this introductory paper, we first describe in detail the motivation and design of the survey. Compared to previous radio surveys, MSSS is exceptional due to its intrinsic multifrequency nature providing information about the spectral properties of the detected sources over more than two octaves (from 30 to 160 MHz). The broadband frequency coverage, together with the fast survey speed generated by LOFARs multibeaming capabilities, make MSSS the first survey of the sort anticipated to be carried out with the forthcoming Square Kilometre Array (SKA). Two of the sixteen frequency bands included in the survey were chosen to exactly overlap the frequency coverage of large-area Very Large Array (VLA) and Giant Metrewave Radio Telescope (GMRT) surveys at 74 MHz and 151 MHz respectively. The survey performance is illustrated within the MSSS Verification Field (MVF), a region of 100 square degrees centered at J2000 (RA,Dec)=(15h,69deg). The MSSS results from the MVF are compared with previous radio survey catalogs. We assess the flux and astrometric uncertainties in the catalog, as well as the completeness and reliability considering our source finding strategy. We determine the 90% completeness levels within the MVF to be 100 mJy at 135 MHz with 108 resolution, and 550 mJy at 50 MHz with 166 resolution. Images and catalogs for the full survey, expected to contain 150,000-200,000 sources, will be released to a public web server. We outline the plans for the ongoing production of the final survey products, and the ultimate public release of images and source catalogs.



قيم البحث

اقرأ أيضاً

LOFAR is the only radio telescope that is presently capable of high-sensitivity, high-resolution (<1 mJy/b and <15) observations at ultra-low frequencies (<100 MHz). To utilise these capabilities, the LOFAR Surveys Key Science Project is undertaking a large survey to cover the entire northern sky with Low Band Antenna (LBA) observations. The LOFAR LBA Sky Survey (LoLSS) aims to cover the entire northern sky with 3170 pointings in the frequency range 42-66 MHz, at a resolution of 15 arcsec and at a sensitivity of 1 mJy/b. Here we outline the survey strategy, the observational status, the current calibration techniques, and briefly describe several scientific motivations. We also describe the preliminary public data release. The preliminary images were produced using a fully automated pipeline that aims to correct all direction-independent effects in the data. Whilst the direction-dependent effects, such as those from the ionosphere, are not yet corrected, the images presented in this work are still 10 times more sensitive than previous surveys available at these low frequencies. The preliminary data release covers 740 sqdeg around the HETDEX spring field region at a resolution of 47 with a median noise level of 5 mJy/b. The images and the catalogue with 25,247 sources are publicly released. We demonstrate that the system is capable of reaching an rms noise of 1 mJy/b and the resolution of 15 once direction-dependent effects are corrected for. LoLSS will provide the ultra-low-frequency information for hundreds of thousands of radio sources, providing critical spectral information and producing a unique dataset that can be used for a wide range of science topics such as: the search for high redshift galaxies and quasars, the study of the magnetosphere of exoplanets, and the detection of the oldest populations of cosmic-rays in galaxies, clusters of galaxies, and from AGN activity.
The LOFAR Two-metre Sky Survey (LoTSS) is a deep 120-168 MHz imaging survey that will eventually cover the entire Northern sky. Each of the 3170 pointings will be observed for 8 hrs, which, at most declinations, is sufficient to produce ~5arcsec reso lution images with a sensitivity of ~0.1mJy/beam and accomplish the main scientific aims of the survey which are to explore the formation and evolution of massive black holes, galaxies, clusters of galaxies and large-scale structure. Due to the compact core and long baselines of LOFAR, the images provide excellent sensitivity to both highly extended and compact emission. For legacy value, the data are archived at high spectral and time resolution to facilitate subarcsecond imaging and spectral line studies. In this paper we provide an overview of the LoTSS. We outline the survey strategy, the observational status, the current calibration techniques, a preliminary data release, and the anticipated scientific impact. The preliminary images that we have released were created using a fully-automated but direction-independent calibration strategy and are significantly more sensitive than those produced by any existing large-area low-frequency survey. In excess of 44,000 sources are detected in the images that have a resolution of 25arcsec, typical noise levels of less than 0.5 mJy/beam, and cover an area of over 350 square degrees in the region of the HETDEX Spring Field (right ascension 10h45m00s to 15h30m00s and declination 45d00m00s to 57d00m00s).
Aims. An efficient means of locating calibrator sources for International LOFAR is developed and used to determine the average density of usable calibrator sources on the sky for subarcsecond observations at 140 MHz. Methods. We used the multi-beamin g capability of LOFAR to conduct a fast and computationally inexpensive survey with the full International LOFAR array. Sources were pre-selected on the basis of 325 MHz arcminute-scale flux density using existing catalogues. By observing 30 different sources in each of the 12 sets of pointings per hour, we were able to inspect 630 sources in two hours to determine if they possess a sufficiently bright compact component to be usable as LOFAR delay calibrators. Results. Over 40% of the observed sources are detected on multiple baselines between international stations and 86 are classified as satisfactory calibrators. We show that a flat low-frequency spectrum (from 74 to 325 MHz) is the best predictor of compactness at 140 MHz. We extrapolate from our sample to show that the density of calibrators on the sky that are sufficiently bright to calibrate dispersive and non-dispersive delays for the International LOFAR using existing methods is 1.0 per square degree. Conclusions. The observed density of satisfactory delay calibrator sources means that observations with International LOFAR should be possible at virtually any point in the sky, provided that a fast and efficient search using the methodology described here is conducted prior to the observation to identify the best calibrator.
We present an overview of, and first science results from, the Magellanic Edges Survey (MagES), an ongoing spectroscopic survey mapping the kinematics of red clump and red giant branch stars in the highly substructured periphery of the Magellanic Clo uds. In conjunction with Gaia astrometry, MagES yields a sample of ~7000 stars with individual 3D velocities that probes larger galactocentric radii than most previous studies. We outline our target selection, observation strategy, data reduction and analysis procedures, and present results for two fields in the northern outskirts ($>10^{circ}$ on-sky from the centre) of the Large Magellanic Cloud (LMC). One field, located in the vicinity of an arm-like overdensity, displays apparent signatures of perturbation away from an equilibrium disk model. This includes a large radial velocity dispersion in the LMC disk plane, and an asymmetric line-of-sight velocity distribution indicative of motions vertically out of the disk plane for some stars. The second field reveals 3D kinematics consistent with an equilibrium disk, and yields $V_{text{circ}}=87.7pm8.0$km s$^{-1}$ at a radial distance of ~10.5kpc from the LMC centre. This leads to an enclosed mass estimate for the LMC at this radius of $(1.8pm0.3)times10^{10}text{M}_{odot}$.
$Kepler$ revealed that roughly one-third of Sun-like stars host planets orbiting within 100 days and between the size of Earth and Neptune. How do these planets form, what are they made of, and do they represent a continuous population or multiple po pulations? To help address these questions, we began the Magellan-TESS Survey (MTS), which uses Magellan II/PFS to obtain radial velocity (RV) masses of 30 TESS-detected exoplanets and develops an analysis framework that connects observed planet distributions to underlying populations. In the past, small planet RV measurements have been challenging to obtain due to host star faintness and low RV semi-amplitudes, and challenging to interpret due to the potential biases in target selection and observation planning decisions. The MTS attempts to minimize these biases by focusing on bright TESS targets and employing a quantitative selection function and observing strategy. In this paper, we (1) describe our motivation and survey strategy, (2) present our first catalog of planet density constraints for 27 TESS Objects of Interest (TOIs; 22 in our population analysis sample, 12 that are members of the same systems), and (3) employ a hierarchical Bayesian model to produce preliminary constraints on the mass-radius (M-R) relation. We find that the biases causing previous M-R relations to predict fairly high masses at $1~R_oplus$ have been reduced. This work can inform more detailed studies of individual systems and offer a framework that can be applied to future RV surveys with the goal of population inferences.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا