اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدExchanging Ohmic Losses in Metamaterial Absorbers with Useful Optical Absorption for Photovoltaics
188
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Using metamaterial absorbers, we have shown that metallic layers in the absorbers do not necessarily constitute undesired resistive heating problem for photovoltaics. Tailoring the geometric skin depth of metals and employing the natural bulk absorbance characteristics of the semiconductors in those absorbers can enable the exchange of undesired resistive losses with the useful optical absorbance in the active semiconductors. Thus, Ohmic loss dominated metamaterial absorbers can be converted into photovoltaic near-perfect absorbers with the advantage of harvesting the full potential of light management offered by the metamaterial absorbers. Based on experimental permittivity data for indium gallium nitride, we have shown that between 75%-95% absorbance can be achieved in the semiconductor layers of the converted metamaterial absorbers. Besides other metamaterial and plasmonic devices, our results may also apply to photodectors and other metal or semiconductor based optical devices where resistive losses and power consumption are important pertaining to the device performance.
قيم البحث
اقرأ أيضاً
Electromagnetic absorbers have drawn increasing attention in many areas. A series of plasmonic and metamaterial structures can work as efficient narrow band absorbers due to the excitation of plasmonic or photonic resonances, providing a great potent
ial for applications in designing selective thermal emitters, bio-sensing, etc. In other applications such as solar energy harvesting and photonic detection, the bandwidth of light absorbers is required to be quite broad. Under such a background, a variety of mechanisms of broadband/multiband absorption have been proposed, such as mixing multiple resonances together, exciting phase resonances, slowing down light by anisotropic metamaterials, employing high loss materials and so on.
Low-loss nanophotonic resonators have been widely used in fundamental science and applications thanks to their ability to concentrate optical energy. Key for resonator engineering, the total intrinsic loss is easily determined by spectroscopy, howeve
r, quantitatively separating absorption and radiative losses is challenging. While the concentrated heat generated by absorption within the small mode volume results in generally unwanted thermo-optical effects, they can provide a way for quantifying absorption. Here, we propose and experimentally demonstrate a technique for separating the loss mechanisms with high confidence using only linear spectroscopic measurements. We use the optically measured resonator thermal time constant to experimentally connect the easily-calculable heat capacity to the thermal impedance, needed to calculate the absorbed power from the temperature change. We report the absorption, radiation, and coupling losses for ten whispering-gallery modes of three different radial orders on a Si microdisk. Similar absorptive loss rates are found for all the modes, despite order-of-magnitude differences in the total dissipation rate due to widely differing radiation losses. Measuring radiation losses of many modes enables distinguishing the two major components of radiation loss originating from scattering and leakage. The all-optical characterization technique is applicable to any nanophotonic resonators subject to thermo-optical effects.
We propose deep-subwavelength optical waveguides based on metal-dielectric multilayer indefinite metamaterials with ultrahigh effective refractive indices. Waveguide modes with different mode orders are systematically analyzed with numerical simulati
ons based on both metal-dielectric multilayer structures and the effective medium approach. The dependences of waveguide mode indices, propagation lengths and mode areas on different mode orders, free space wavelengths and sizes of waveguide cross sections are studied. Furthermore, waveguide modes are also illustrated with iso-frequency contours in the wave vector space in order to investigate the mechanism of waveguide mode cutoff for high order modes. The deep-subwavelength optical waveguide with a size smaller than {lambda}0/50 and a mode area in the order of 10-4 {lambda}02 is realized, and an ultrahigh effective refractive index up to 62.0 is achieved at the telecommunication wavelength. This new type of metamaterial optical waveguide opens up opportunities for various applications in enhanced light-matter interactions.
Since thin-film silicon solar cells have limited optical absorption, we explore the effect of a nanostructured back reflector to recycle the unabsorbed light. As a back reflector we investigate a 3D photonic band gap crystal made from silicon that is
readily integrated with the thin films. We numerically obtain the optical properties by solving the 3D time-harmonic Maxwell equations using the finite-element method, and model silicon with experimentally determined optical constants. The absorption enhancement relevant for photovoltaics is obtained by weighting the absorption spectra with the AM 1.5 standard solar spectrum. We study thin films either thicker ($L_{Si} = 2400$ nm) or much thinner ($L_{Si} = 80$ nm) than the wavelength of light. At $L_{Si} = 2400$ nm, the 3D photonic band gap crystal enhances the spectrally averaged ($lambda = 680$ nm to $880$ nm) silicon absorption by $2.22$x (s-pol.) to $2.45$x (p-pol.), which exceeds the enhancement of a perfect metal back reflector ($1.47$ to $1.56$x). The absorption is enhanced by the (i) broadband angle and polarization-independent reflectivity in the 3D photonic band gap, and (ii) the excitation of many guided modes in the film by the crystals surface diffraction leading to enhanced path lengths. At $L_{Si} = 80$ nm, the photonic crystal back reflector yields a striking average absorption enhancement of $9.15$x, much more than $0.83$x for a perfect metal, which is due to a remarkable guided mode confined within the combined thickness of the thin film and the photonic crystals Bragg attenuation length. The broad bandwidth of the 3D photonic band gap leads to the back reflectors Bragg attenuation length being much shorter than the silicon absorption length. Consequently, light is confined inside the thin film and the absorption enhancements are not due to the additional thickness of the photonic crystal back reflector.
Motivated by the theoretical observation that isotropic chirality can exist even in completely random systems, we design a dielectric metamaterial consisting of a random colloid of meta-atoms, which exhibits unprecedentedly high isotropic optical act
ivity. Each meta-atom is composed of a helically arranged cluster of silicon nanospheres. Such clusters can be fabricated by large-scale DNA self-assembly techniques. It is demonstrated that the use of a high concentration of the meta-atoms in the colloid provides significant suppressions of incoherent scattering losses. As a result, the proposed system shows three orders of magnitude improvement of isotropic optical activity as compared with the previous metamaterial designs. This work highlights the significant potential of completely random system, which are commonly produced in colloidal sciences, for applications as metamaterials towards novel photonic effects and devices.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
