ترغب بنشر مسار تعليمي؟ اضغط هنا

Photonics-assisted wideband RF self-interference cancellation with digital domain amplitude and delay pre-matching

83   0   0.0 ( 0 )
 نشر من قبل Yang Chen
 تاريخ النشر 2021
  مجال البحث هندسة إلكترونية
والبحث باللغة English




اسأل ChatGPT حول البحث

A photonics-based digital and analog self-interference cancellation approach for in-band full-duplex communication systems and frequency-modulated continuous-wave radar systems is reported. One dual-drive Mach-Zehnder modulator is used to implement the analog self-interference cancellation by pre-adjusting the delay and amplitude of the reference signal applied to the dual-drive Mach-Zehnder modulator in the digital domain. The amplitude is determined via the received signal power, while the delay is searched by the cross-correlation and bisection methods. Furthermore, recursive least squared or normalized least mean square algorithms are used to suppress the residual self-interference in the digital domain. Quadrature phase-shift keying modulated signals and linearly frequency-modulated signals are used to experimentally verify the proposed method. The analog cancellation depth is around 20 dB, and the total cancellation depth is more than 36 dB for the 2-Gbaud quadrature phase-shift keying modulated signals. For the linearly frequency-modulated signals, the analog and total cancellation depths are around 19 dB and 34 dB, respectively.



قيم البحث

اقرأ أيضاً

93 - Yang Qi , Ben Wu 2021
We propose and experimentally demonstrate an interference management system that removes wideband wireless interference by using photonic signal processing and free space optical communication. The receiver separates radio frequency interferences by upconverting the mixed signals to optical frequencies and processing the signals with the photonic circuits. Signals with GHz bandwidth are processed and separated in real-time. The reference signals for interference cancellation are transmitted in a free space optical communication link, which provides large bandwidth for multi-band operation and accelerates the mixed signal separation process by reducing the dimensions of the un-known mixing matrix. Experimental results show that the system achieves 30dB real-time cancellation depth with over 6GHz bandwidth. Multiple radio frequency bands can be processed at the same time with a single system. In addition, multiple radio frequency bands can be processed at the same time with a single system.
In this paper, we focus on reduced complexity full duplex Multiple-Input Multiple-Output (MIMO) systems and present a joint design of digital transmit and receive beamforming with Analog and Digital (A/D) self-interference cancellation. We capitalize on a recently proposed multi-tap analog canceller architecture, whose number of taps does not scale with the number of transceiver antennas, and consider practical transmitter impairments for the full duplex operation. Particularly, transmitter IQ imbalance and nonlinear power amplification are assumed via relevant realistic models. Aiming at suppressing the residual linear and nonlinear self-interference signal below the noise floor, we propose a novel digital self-interference cancellation technique that is jointly designed with the configuration of the analog taps and digital beamformers. Differently from the state of the art, we design pilot-assisted estimation of all involved wireless channels. Our representative Monte Carlo simulation results demonstrate that our unified full duplex MIMO design exhibits higher self-interference cancellation capability with less analog taps compared to available techniques, which results in improved achievable rate and bit error performance.
We propose a digital interference mitigation scheme to reduce the impact of mode coupling in space division multiplexing self-homodyne coherent detection and experimentally verify its effectiveness in 240-Gbps mode-multiplexed transmission over 3-mode multimode fiber.
Convolutional Neural Networks (CNNs) are powerful and highly ubiquitous tools for extracting features from large datasets for applications such as computer vision and natural language processing. However, a convolution is a computationally expensive operation in digital electronics. In contrast, neuromorphic photonic systems, which have experienced a recent surge of interest over the last few years, propose higher bandwidth and energy efficiencies for neural network training and inference. Neuromorphic photonics exploits the advantages of optical electronics, including the ease of analog processing, and busing multiple signals on a single waveguide at the speed of light. Here, we propose a Digital Electronic and Analog Photonic (DEAP) CNN hardware architecture that has potential to be 2.8 to 14 times faster while maintaining the same power usage of current state-of-the-art GPUs.
The Large Intelligent Surface (LIS) concept is a promising technology aiming to revolutionize wireless communication by exploiting spatial multiplexing at its fullest. Despite of its potential, due to the size of the LIS and the large number of anten na elements involved there is a need of decentralized architectures together with distributed algorithms which can reduce the inter-connection data-rate and computational requirement in the Central Processing Unit (CPU). In this article we address the uplink detection problem in the LIS system and propose a decentralize architecture based on panels, which perform local linear processing. We also provide the sum-rate capacity for such architecture and derive an algorithm to obtain the equalizer, which aims to maximize the sum-rate capacity. A performance analysis is also presented, including a comparison to a naive approach based on a reduced form of the matched filter (MF) method. The results shows the superiority of the proposed algorithm.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا