ترغب بنشر مسار تعليمي؟ اضغط هنا

High-Intensity and Uniform Red-Green-Blue Triple Reflective Bands Achieved by Rationally-Designed Ultrathin Heterostructure Photonic Crystals

123   0   0.0 ( 0 )
 نشر من قبل Quan-Shan Liu
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The relationships between material constructions and reflective spectrum patterns are important properties of photonic crystals. One particular interesting reflectance profile is a high-intensity and uniform three-peak pattern with peak positions right located at the red, green, and blue (RGB, three original colors) region. For ease of construction, a seek for using one-dimensional photonic crystals to achieve RGB triple reflective bands is a meaningful endeavor. Only very limited previous studies exist, all relying on traditional periodic photonic crystals (PPCs) and of large thickness. The underlying physical principles remain elusive, leaving the question of thickness limit to achieve RGB bands unaddressed. Here, we present the first detailed work to explore the thickness limit issue based on both theoretical and experimental investigation. A set of heuristically derived design principles are used to uncover that the break of translational symmetry, thus introducing heterostructure photonic crystals (HPCs), is essential to reduce the total optical path difference (OPD) to ~ 3200nm (the theoretical limit) while still exhibiting high-quality RGB bands. A systematic experiment based on a 12-layer heterostructure construction was performed and well confirmed the theoretical predictions. The associated three-peak properties are successfully used to realize quantum dot fluorescent enhancement phenomena. Furthermore, the HPC exhibits unusually stability against solvent stimulus, in strong contrast to typical behaviors reported in PPCs. Our work for the first time proposes and verifies important rational rules for designing ultrathin HPCs toward RGB reflective bands, and provides insights for a wider range of explorations of light manipulation in photonic crystals.



قيم البحث

اقرأ أيضاً

Optical limiters are nonlinear devices that feature decreasing transmittance with increasing incident optical intensity, and thus can protect sensitive components from high-intensity illumination. The ideal optical limiter reflects rather than absorb s light in its active (limiting) state, minimizing risk of damage to the limiter itself. Previous efforts to realize reflective limiters were based on embedding nonlinear layers into relatively thick multilayer photonic structures, resulting in substantial fabrication complexity, reduced speed and, in some instances, limited working bandwidth. We overcome these tradeoffs by using the insulator-to-metal transition in vanadium dioxide (VO2) to achieve intensity-dependent modulation of resonant transmission through aperture antennas. Due to the dramatic change of optical properties across the insulator-to-metal transition, low-quality-factor resonators were sufficient to achieve high on-off ratios in device transmittance. As a result, our ultra-thin reflective limiter (thickness ~1/100 of the free-space wavelength) is broadband in terms of operating wavelength (> 2 um at 10 um) and angle of incidence (up to ~50$deg$ away from the normal).
100 - Quan-Shan Liu , Lu Qiu , Tao Wen 2021
Two different methods are illustrated to tune multiple reflective bands. For both two types of one-dimensional (1D) photonic crystal (PC) construction, positions of multiple reflective bands can be regulated under certain principles. In addition, the 1D PC heterostructure could be adopted to modulate the relative intensities of reflectance between multiple reflective bands. Structural color is revealed by transforming reflection spectra into CIE coordinates, and the obtained results indicate that CIE coordinate shift occurs due to either band position change or band reflectance variation. The CIE coordinate shift behavior is also influenced by the number of multiple reflective bands. The two approaches reported in this work may provide insights for the application of 1D PC in areas such as displays, sensors, and decoration.
We optimize multilayered anti-reflective coatings for photovoltaic devices, using modern evolutionary algorithms. We apply a rigorous methodology to show that a given structure, which is particularly regular, emerge spontaneously in a very systematic al way for a very broad range of conditions. The very regularity of the structure allows for a thorough physical analysis of how the designs operate. This allows to understand that the central part is a photonic crystal utilized as a buffer for light, and that the external layers have the purpose of reducing the impedance mismatch between the outer media and the Bloch mode supported by the photonic crystal. This shows how optimization can suggest new design rules and be considered as a source of inspiration. Finally, we fabricate these structures with easily deployable techniques.
The ability of photonic crystal waveguides (PCWs) to confine and slow down light makes them an ideal component to enhance the performance of various photonic devices, such as optical modulators or sensors. However, the integration of PCWs in photonic applications poses design challenges, most notably, engineering the PCW mode dispersion and creating efficient coupling devices. Here, we solve these challenges with photonic inverse design, and experimentally demonstrate a slow-light PCW optical phased array (OPA) with a wide steering range. Even and odd mode PCWs are engineered for a group index of 25, over a bandwidth of 20nm and 12nm, respectively. Additionally, for both PCW designs, we create strip waveguide couplers and free-space vertical couplers. Finally, also relying on inverse design, the radiative losses of the PCW are engineered, allowing us to construct OPAs with a 20{deg} steering range in a 20nm bandwidth.
Nonreciprocal devices such as isolators and circulators are key enabling technologies for communication systems, both at microwave and optical frequencies. While nonreciprocal devices based on magnetic effects are available for free-space and fibre-o ptic communication systems, their on-chip integration has been challenging, primarily due to the concomitant high insertion loss, weak magneto-optical effects, and material incompatibility. We show that Kerr nonlinear resonators can be used to achieve all-passive, low-loss, bias-free, broadband nonreciprocal transmission and routing for applications in photonic systems such as chip-scale LIDAR. A multi-port nonlinear Fano resonator is used as an on-chip, all-optical router for frequency comb based distance measurement. Since time-reversal symmetry imposes stringent limitations on the operating power range and transmission of a single nonlinear resonator, we implement a cascaded Fano-Lorentzian resonator system that overcomes these limitations and significantly improves the insertion loss, bandwidth and non-reciprocal power range of current state-of-the-art devices. This work provides a platform-independent design for nonreciprocal transmission and routing that are ideally suited for photonic integration.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا