اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAnalysis and fabrication of a photonic crystal based anti-reflective coating for photovoltaics generated by evolutionary optimization
72
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We optimize multilayered anti-reflective coatings for photovoltaic devices, using modern evolutionary algorithms. We apply a rigorous methodology to show that a given structure, which is particularly regular, emerge spontaneously in a very systematical way for a very broad range of conditions. The very regularity of the structure allows for a thorough physical analysis of how the designs operate. This allows to understand that the central part is a photonic crystal utilized as a buffer for light, and that the external layers have the purpose of reducing the impedance mismatch between the outer media and the Bloch mode supported by the photonic crystal. This shows how optimization can suggest new design rules and be considered as a source of inspiration. Finally, we fabricate these structures with easily deployable techniques.
قيم البحث
اقرأ أيضاً
Nanoantennas for light enhance light-matter interaction at the nanoscale making them useful in optical communication, sensing, and spectroscopy. So far nanoantenna engineering has been largely based on rules derived from the radio frequency domain wh
ich neglect the inertia of free metal electrons at optical frequencies causing phenomena such as complete field penetration, ohmic losses and plasmon resonances. Here we introduce a general and scalable evolutionary algorithm that accounts for topological constrains of the fabrication method and therefore yields unexpected nanoantenna designs exhibiting strong light localization and enhancement which can directly be printed by focused-ion beam milling. The fitness ranking in a hierarchy of such antennas is validated experimentally by two-photon photoluminescence. Analysis of the best antennas operation principle shows that it deviates fundamentally from that of classical radio wave-inspired designs. Our work sets the stage for a widespread application of evolutionary optimization to a wide range of problems in nano photonics.
Two different methods are illustrated to tune multiple reflective bands. For both two types of one-dimensional (1D) photonic crystal (PC) construction, positions of multiple reflective bands can be regulated under certain principles. In addition, the
1D PC heterostructure could be adopted to modulate the relative intensities of reflectance between multiple reflective bands. Structural color is revealed by transforming reflection spectra into CIE coordinates, and the obtained results indicate that CIE coordinate shift occurs due to either band position change or band reflectance variation. The CIE coordinate shift behavior is also influenced by the number of multiple reflective bands. The two approaches reported in this work may provide insights for the application of 1D PC in areas such as displays, sensors, and decoration.
Since thin-film silicon solar cells have limited optical absorption, we explore the effect of a nanostructured back reflector to recycle the unabsorbed light. As a back reflector we investigate a 3D photonic band gap crystal made from silicon that is
readily integrated with the thin films. We numerically obtain the optical properties by solving the 3D time-harmonic Maxwell equations using the finite-element method, and model silicon with experimentally determined optical constants. The absorption enhancement relevant for photovoltaics is obtained by weighting the absorption spectra with the AM 1.5 standard solar spectrum. We study thin films either thicker ($L_{Si} = 2400$ nm) or much thinner ($L_{Si} = 80$ nm) than the wavelength of light. At $L_{Si} = 2400$ nm, the 3D photonic band gap crystal enhances the spectrally averaged ($lambda = 680$ nm to $880$ nm) silicon absorption by $2.22$x (s-pol.) to $2.45$x (p-pol.), which exceeds the enhancement of a perfect metal back reflector ($1.47$ to $1.56$x). The absorption is enhanced by the (i) broadband angle and polarization-independent reflectivity in the 3D photonic band gap, and (ii) the excitation of many guided modes in the film by the crystals surface diffraction leading to enhanced path lengths. At $L_{Si} = 80$ nm, the photonic crystal back reflector yields a striking average absorption enhancement of $9.15$x, much more than $0.83$x for a perfect metal, which is due to a remarkable guided mode confined within the combined thickness of the thin film and the photonic crystals Bragg attenuation length. The broad bandwidth of the 3D photonic band gap leads to the back reflectors Bragg attenuation length being much shorter than the silicon absorption length. Consequently, light is confined inside the thin film and the absorption enhancements are not due to the additional thickness of the photonic crystal back reflector.
The relationships between material constructions and reflective spectrum patterns are important properties of photonic crystals. One particular interesting reflectance profile is a high-intensity and uniform three-peak pattern with peak positions rig
ht located at the red, green, and blue (RGB, three original colors) region. For ease of construction, a seek for using one-dimensional photonic crystals to achieve RGB triple reflective bands is a meaningful endeavor. Only very limited previous studies exist, all relying on traditional periodic photonic crystals (PPCs) and of large thickness. The underlying physical principles remain elusive, leaving the question of thickness limit to achieve RGB bands unaddressed. Here, we present the first detailed work to explore the thickness limit issue based on both theoretical and experimental investigation. A set of heuristically derived design principles are used to uncover that the break of translational symmetry, thus introducing heterostructure photonic crystals (HPCs), is essential to reduce the total optical path difference (OPD) to ~ 3200nm (the theoretical limit) while still exhibiting high-quality RGB bands. A systematic experiment based on a 12-layer heterostructure construction was performed and well confirmed the theoretical predictions. The associated three-peak properties are successfully used to realize quantum dot fluorescent enhancement phenomena. Furthermore, the HPC exhibits unusually stability against solvent stimulus, in strong contrast to typical behaviors reported in PPCs. Our work for the first time proposes and verifies important rational rules for designing ultrathin HPCs toward RGB reflective bands, and provides insights for a wider range of explorations of light manipulation in photonic crystals.
Semi-transparent photovoltaics (ST-PV) provide smart spatial solutions to integrate solar cells into already-built areas. Here, we study the potential of semiconductor nanowires (NWs) as promising ST-PV. We perform FDTD simulations for different PV m
aterials in a wide range of array geometries, from which we compute PV performance next to perceived appearance. Surprisingly we find an unusual compromise between photocurrent and transmittance as a function of NW diameter that enables NW-based PV to outperform theoretical limits of non-wavelength selective ST-PV. We theoretically and experimentally demonstrate the robustness of NW arrays to different illumination conditions. We provide the origin behind the outperforming NW array geometries, which is crucial for designing NW-based ST-PV systems based on specific needs.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
