اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOne-reactor vacuum and plasma synthesis of transparent conducting oxide nanotubes and nanotrees: from single wire conductivity to ultra-broadband perfect absorbers in the NIR
68
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The eventual exploitation of one-dimensional nanomaterials yet needs the development of scalable, high yield, homogeneous, and environmentally friendly methods able to meet the requirements for the fabrication of under design functional nanomaterials. In this article, we demonstrate a vacuum and plasma one-reactor approach for the synthesis of the fundamental common element in solar energy and optoelectronics, i.e. the transparent conducting electrode but in the form of nanotubes and nanotrees architectures. Although the process is generic and can be used for a variety of TCOs and wide-bandgap semiconductors, we focus herein on Indium Doped Tin Oxide (ITO) as the most extended in the previous applications. This protocol combines widely applied deposition techniques such as thermal evaporation for the formation of organic nanowires serving as 1D and 3D soft templates, deposition of polycrystalline layers by magnetron sputtering, and removal of the template by simply annealing under mild vacuum conditions. The process variables are tuned to control the stoichiometry, morphology, and alignment of the ITO nanotubes and nanotrees. Four-probe characterization reveals the improved lateral connectivity of the ITO nanotrees and applied on individual nanotubes shows resistivities as low as 3.5 +/- 0.9 x 10-4 {Omega}.cm, a value comparable to single-crystalline counterparts. The assessment of diffuse reflectance and transmittance in the UV-VIS range confirms the viability of the supported ITO nanotubes as a random optical media working as strong scattering layers. Further ability to form ITO nanotrees opens the path for practical applications as ultra-broadband absorbers in the NIR. The demonstrated low resistivity and optical properties of these ITO nanostructures open the way for their use in LEDs, IR shield, energy harvesting, nanosensors, and photoelectrochemical applications
قيم البحث
اقرأ أيضاً
CuI has been recently rediscovered as a p-type transparent conductor with a high figure of merit. Even though many metal iodides are hygroscopic, the effect of moisture on the electrical properties of CuI has not been clarified. In this work, we obse
rve a two-fold increase in the conductivity of CuI after exposure to ambient humidity for 5 hours, followed by slight long-term degradation. Simultaneously, the work function of CuI decreases by almost 1 eV, which can explain the large spread in the previously reported work function values. The conductivity increase is partially reversible and is maximized at intermediate humidity levels. Based on the large intra-grain mobility measured by THz spectroscopy, we suggest that hydration of grain boundaries may be beneficial for the overall hole mobility.
Ever since the discovery of carbon nanotubes (CNTs), it has long been a challenging goal to create macroscopically ordered assemblies, or crystals, of CNTs that preserve the one-dimensional quantum properties of individual CNTs on a macroscopic scale
. Recently, a simple and well-controlled method was reported for producing wafer-scale crystalline films of highly aligned and densely packed CNTs through spontaneous global alignment that occurs during vacuum filtration [textit{Nat. Nanotechnol}. textbf{11}, 633 (2016)]. However, a full understanding of the mechanism of such global alignment has not been achieved. Here, we report results of a series of systematic experiments that demonstrate that the CNT alignment direction can be controlled by the surface morphology of the filter membrane used in the vacuum filtration process. More specifically, we found that the direction of parallel grooves pre-existing on the surface of the filter membrane dictates the direction of the resulting CNT alignment. Furthermore, we intentionally imprinted periodically spaced parallel grooves on a filter membranes using a diffraction grating, which successfully defined the direction of the global alignment of CNTs in a precise and reproducible manner.
With a large-scale usage of portable electric appliances, a high demand for increasingly high density energy storage devices has emerged. MoO3 has, in principle, a large potential as negative electrode material in supercapacitive devices, due to high
charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO3 in aqueous electrolytes prevents a practical use in high capacitance devices. In this work, we describe how to overcome this severe stability issue by forming amorphous molybdenum oxide/tantalum oxide nanotubes by anodic oxidation of a Mo-Ta alloy. The presence of a critical amount of Ta-oxide (> 20 at-%) prevents the electrochemical decay of the MoO3 phase and thus yields an extremely high stability. Due to the protection provided by tantalum oxide, no capacitance losses are measureable after 10000 charg-ing/discharging cycles.
Metal halide perovskites (MHPs) have become a promising candidate in a myriad of applications, such as light-emitting diodes, solar cells, lasing, photodetectors, photocatalysis, transistors, etc. This is related to the synergy of their excellent fea
tures, including high photoluminescence quantum yields, narrow and tunable emission, long charge carrier lifetimes, broad absorption spectrum along with high extinction absorptions coefficients, among others. However, the main bottleneck is the poor stability of the MHPs under ambient conditions. This is imposing severe restrictions with respect to their industrialized applications and commercialization. In this context, metal oxide (MOx) coatings have recently emerged as an efficient strategy towards overcoming the stabilities issues as well as retain the excellent properties of the MHPs, and therefore facilitate the development of the related devices stabilities and performances.This review provides a summary of the recent progress on synthetic methods, enhanced features, the techniques to assess the MHPs-MOxcomposites, and applications of the [email protected], novel approaches to fabricate the composites and new applications of the composites are also reported in this review for the first time. This is rounded by a critical outlook about the current MHPs stability issues and the further direction to ensure a bright future of MHPs@MOx
Optical phase change materials (O-PCMs), a unique group of materials featuring drastic optical property contrast upon solid-state phase transition, have found widespread adoption in photonic switches and routers, reconfigurable meta-optics, reflectiv
e display, and optical neuromorphic computers. Current phase change materials, such as Ge-Sb-Te (GST), exhibit large contrast of both refractive index (delta n) and optical loss (delta k), simultaneously. The coupling of both optical properties fundamentally limits the function and performance of many potential applications. In this article, we introduce a new class of O-PCMs, Ge-Sb-Se-Te (GSST) which breaks this traditional coupling, as demonstrated with an optical figure of merit improvement of more than two orders of magnitude. The first-principle computationally optimized alloy, Ge2Sb2Se4Te1, combines broadband low optical loss (1-18.5 micron), large optical contrast (delta n = 2.0), and significantly improved glass forming ability, enabling an entirely new field of infrared and thermal photonic devices. We further leverage the material to demonstrate nonvolatile integrated optical switches with record low loss and large contrast ratio, as well as an electrically addressed, microsecond switched pixel level spatial light modulator, thereby validating its promise as a platform material for scalable nonvolatile photonics.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
