اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTOPoS VI. The metal-weak tail of the metallicity distribution functions of the Milky Way and of the Gaia-Sausage-Enceladus structure
135
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Context. The TOPoS project has the goal to find and analyse Turn-Off (TO) stars of extremely low metallicity. To select the targets for spectroscopic follow-up at high spectral resolution, we have relied on low-resolution spectra from the Sloan Digital Sky Survey. Aims. In this paper we use the metallicity estimates we have obtained from our analysis of the SDSS spectra to construct the metallicity distribution function (MDF) of the Milky Way, with special emphasis on its metal-weak tail. The goal is to provide the underlying distribution out of which the TOPoS sample was extracted. Methods. We make use of SDSS photometry, Gaia photometry and distance estimates derived from the Gaia parallaxes to derive a metallicity estimate for a large sample of over 24 million TO stars. This sample is used to derive the metallicity bias of the sample for which SDSS spectra are available. Results. We determined that the spectroscopic sample is strongly biased in favour of metal-poor stars, as intended. A comparison with the unbiased photometric sample allows to correct for the selection bias. We select a sub-sample of stars with reliable parallaxes for which we combine the SDSS radial velocities with Gaia proper motions and parallaxes to compute actions and orbital parameters in the Galactic potential. This allows us to characterize the stars dynamically, and in particular to select a sub-sample that belongs to the Gaia-Sausage-Enceladus (GSE) accretion event. We are thus able to provide also the MDF of GSE. Conclusions. The metal-weak tail derived in our study is very similar to that derived in the H3 survey and in the Hamburg/ESO Survey. This allows us to average the three MDFs and provide an error bar for each metallicity bin. Inasmuch the GSE structure is representative of the progenitor galaxy that collided with the Milky Way, that galaxy appears to be strongly deficient in metal-poor stars compared to the Milky Way, suggesting that the metal-weak tail of the latter has been largely formed by accretion of low mass galaxies rather than massive galaxies, such as the GSE progenitor.
قيم البحث
اقرأ أيضاً
We characterize the Gaia-Enceladus-Sausage kinematic structure recently discovered in the Galactic halo using photometric metallicities from the SkyMapper survey, and kinematics from Gaia radial velocities measurements. By examining the metallicity d
istribution functions (MDFs) of stars binned in kinematic/action spaces, we find that the $sqrt{J_R}$ vs $L_z$ space allows for the cleanest selection of Gaia-Enceladus-Sausage stars with minimal contamination from disc or halo stars formed in situ or in other past mergers. Stars with $30 leq sqrt{J_R} leq 50$ (kpc km s$^{-1})^{1/2}$ and $-500 leq L_z leq 500$ kpc km s$^{-1}$ have a narrow MDF centered at [Fe/H] $= -1.17$ dex with a dispersion of 0.34 dex. This [Fe/H] estimate is more metal-rich than literature estimates by $0.1-0.3$ dex. Based on the MDFs, we find that selection of Gaia-Enceladus-Sausage stars in other kinematic/action spaces without additional population information leads to contaminated samples. The clean Gaia-Enceladus-Sausage sample selected according to our criteria is slightly retrograde and lies along the blue sequence of the high $V_T$ halo CMD dual sequence. Using a galaxy mass-metallicity relation derived from cosmological simulations and assuming a mean stellar age of 10 Gyr we estimate the mass of the Gaia-Enceladus-Sausage progenitor satellite to be $10^{8.85-9.85}$ M$_{odot}$, which is consistent with literature estimates based on disc dynamic and simulations. Additional information on detailed abundances and ages would be needed for a more sophisticated selection of purely Gaia-Enceladus-Sausage stars.
We present a low metallicity map of the Milky Way consisting of $sim$111,000 giants with $-3.5 lesssim$ [Fe/H] $lesssim -$0.75, based on public photometry from the second data release of the SkyMapper survey. These stars extend out to $sim$7kpc from
the solar neighborhood and cover the main Galactic stellar populations, including the thick disk and the inner halo. Notably, this map can reliably differentiate metallicities down to [Fe/H] $sim -3.0$, and thus provides an unprecedented view into the ancient, metal-poor Milky Way. Among the more metal-rich stars in our sample ([Fe/H] $> -2.0$), we recover a clear spatial dependence of decreasing mean metallicity as a function of scale height that maps onto the thick disk component of the Milky Way. When only considering the very metal-poor stars in our sample ([Fe/H] $< -$2), we recover no such spatial dependence in their mean metallicity out to a scale height of $|Z|sim7$ kpc. We find that the metallicity distribution function (MDF) of the most metal-poor stars in our sample ($-3.0 <$ [Fe/H] $< -2.3$) is well fit with an exponential profile with a slope of $Deltalog(N)/Delta$[Fe/H] = 1.52$pm$0.05, and shifts to $Deltalog(N)/Delta$[Fe/H] = 1.53$pm$0.10 after accounting for target selection effects. For [Fe/H] $< -2.3$, the MDF is largely insensitive to scale height $|Z|$ out to $sim5$kpc, showing that very and extremely metal-poor stars are in every galactic component.
Using a sample of 69,919 red giants from the SDSS-III/APOGEE Data Release 12, we measure the distribution of stars in the [$alpha$/Fe] vs. [Fe/H] plane and the metallicity distribution functions (MDF) across an unprecedented volume of the Milky Way d
isk, with radius $3<R<15$ kpc and height $|z|<2$ kpc. Stars in the inner disk ($R<5$ kpc) lie along a single track in [$alpha$/Fe] vs. [Fe/H], starting with $alpha$-enhanced, metal-poor stars and ending at [$alpha$/Fe]$sim0$ and [Fe/H]$sim+0.4$. At larger radii we find two distinct sequences in [$alpha$/Fe] vs. [Fe/H] space, with a roughly solar-$alpha$ sequence that spans a decade in metallicity and a high-$alpha$ sequence that merges with the low-$alpha$ sequence at super-solar [Fe/H]. The location of the high-$alpha$ sequence is nearly constant across the disk, however there are very few high-$alpha$ stars at $R>11$ kpc. The peak of the midplane MDF shifts to lower metallicity at larger $R$, reflecting the Galactic metallicity gradient. Most strikingly, the shape of the midplane MDF changes systematically with radius, with a negatively skewed distribution at $3<R<7$ kpc, to a roughly Gaussian distribution at the solar annulus, to a positively skewed shape in the outer Galaxy. For stars with $|z|>1$ kpc or [$alpha$/Fe]$>0.18$, the MDF shows little dependence on $R$. The positive skewness of the outer disk MDF may be a signature of radial migration; we show that blurring of stellar populations by orbital eccentricities is not enough to explain the reversal of MDF shape but a simple model of radial migration can do so.
The Galactic bulge of the Milky Way is made up of stars with a broad range of metallicity, -3.0 < [Fe/H] < 1 dex. The mean of the Metallicity Distribution Function (MDF) decreases as a function of height z from the plane and, more weakly, with galact
ic radius. The most metal rich stars in the inner Galaxy are concentrated to the plane and the more metal poor stars are found predominantly further from the plane, with an overall vertical gradient in the mean of the MDF of about -0.45 dex/kpc. This vertical gradient is believed to reflect the changing contribution with height of different populations in the inner-most region of the Galaxy. The more metal rich stars of the bulge are part of the boxy/peanut structure and comprise stars in orbits which trace out the underlying X-shape. There is still a lack of consensus on the origin of the metal poor stars ([Fe/H] < -0.5) in the region of the bulge. Some studies attribute the more metal poor stars of the bulge to the thick disk and stellar halo that are present in the inner region, and other studies propose that the metal poor stars are a distinct old spheroid bulge population. Understanding the origin of the populations that make up the MDF of the bulge, and identifying if there is a unique bulge population which has formed separately from the disk and halo, has important consequences for identifying the relevant processes in the the formation and evolution of the Milky Way.
Identifying stars found in the Milky Way as having formed in situ or accreted can be a complex and uncertain undertaking. We use Gaia kinematics and APOGEE elemental abundances to select stars belonging to the Gaia-Sausage-Enceladus (GSE) and Sequoia
accretion events. These samples are used to characterize the GSE and Sequoia population metallicity distribution functions, elemental abundance patterns, age distributions, and progenitor masses. We find that the GSE population has a mean [Fe/H] $sim -1.15$ and a mean age of $10-12$ Gyr. GSE has a single sequence in [Mg/Fe] vs [Fe/H] consistent with the onset of SN Ia Fe contributions and uniformly low [Al/Fe] of $sim -0.25$ dex. The derived properties of the Sequoia population are strongly dependent on the kinematic selection. We argue the selection with the least contamination is $J_{phi}/J_{mbox{tot}} < -0.6$ and $(J_z - J_R)/J_{mbox{tot}} < 0.1$. This results in a mean [Fe/H] $sim -1.3$ and a mean age of $12-14$ Gyr. The Sequoia population has a complex elemental abundance distribution with mainly high [Mg/Fe] stars. We use the GSE [Al/Fe] vs [Mg/H] abundance distribution to inform a chemically-based selection of accreted stars, which is used to remove possible contaminant stars from the GSE and Sequoia samples.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
