ترغب بنشر مسار تعليمي؟ اضغط هنا

Analysis of Screening Effects on Terahertz Photoconductive Devices using a Fully-Coupled Multiphysics Approach

122   0   0.0 ( 0 )
 نشر من قبل Liang Chen
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

The terahertz current generated by a photoconductive device (PCD) saturates as the power of the input optical pump is increased. This behavior is induced by various screening effects that stem from the interactions between electromagnetic (EM) fields and semiconductor carriers. In this work, these screening effects are numerically analyzed for the first time using a fully-coupled multiphysics approach. Unlike the previously developed simulation frameworks, this approach rigorously models the nonlinear coupling between the EM fields and the carriers and therefore is capable of accounting for the screening effects. It is demonstrated that the results obtained using this multiphysics approach and actual experiments are in excellent agreement. The optical- and radiation-field screening effects are identified in the simulation results and the optical-field screening is found to play a more dominant role in the saturation of the PCD output under high optical pump power levels.



قيم البحث

اقرأ أيضاً

76 - Mario Schwartz 2018
Photonic quantum technologies such as quantum cryptography, photonic quantum metrology, photonic quantum simulators and computers will largely benefit from highly scalable and small footprint quantum photonic circuits. To perform fully on-chip quantu m photonic operations, three basic building blocks are required: single-photon sources, photonic circuits and single-photon detectors. Highly integrated quantum photonic chips on silicon and related platforms have been demonstrated incorporating only one or two of these basic building blocks. Previous implementations of all three components were mainly limited by laser stray light, making temporal filtering necessary or required complex manipulation to transfer all components onto one chip. So far, a monolithic, simultaneous implementation of all elements demonstrating single-photon operation remains elusive. Here, we present a fully-integrated Hanbury-Brown and Twiss setup on a micron-sized footprint, consisting of a GaAs waveguide embedding quantum dots as single-photon sources, a waveguide beamsplitter and two superconducting nanowire single-photon detectors. This enables a second-order correlation measurement at the single-photon level under both continuous-wave and pulsed resonant excitation.
A method to perform spectrum analysis on low power signals between 0.1 and 10 THz is proposed. It utilizes a nanoscale antiferromagnetic tunnel junction (ATJ) that produces an oscillating tunneling anisotropic magnetoresistance, whose frequency is de pendent on the magnitude of an evanescent spin current. It is first shown that the ATJ oscillation frequency can be tuned linearly with time. Then, it is shown that the ATJ output is highly dependent on matching conditions that are highly dependent on the dimensions of the dielectric tunneling barrier. Spectrum analysis can be performed by using an appropriately designed ATJ, whose frequency is driven to increase linearly with time, a low pass filter, and a matched filter. This method of THz spectrum analysis, if realized in experiment, will allow miniaturized electronics to rapidly analyze low power signals with a simple algorithm. It is also found by simulation and analytical theory that for an ATJ with a 0.09 $mu$m$^2$ footprint, spectrum analysis can be performed over a 0.25 THz bandwidth in just 25 ns on signals that are at the Johnson-Nyquist thermal noise floor.
We report on the engineering of broadband quantum cascade lasers (QCLs) emitting at Terahertz (THz) frequencies, which exploit a heterogeneous active region scheme and have a current density dynamic range (Jdr) of 3.2, significantly larger than the s tate of the art, over a 1.3 THz bandwidth. We demonstrate that the devised broadband lasers operate as THz optical frequency comb synthesizers in continuous wave, with a maximum optical output power of 4 mW (0.73 mW in the comb regime). Measurement of the intermode beatnote map reveals a clear dispersion-compensated frequency comb regime extending over a continuous 106 mA current range (current density dynamic range of 1.24), significantly larger than the state of the art reported under similar geometries, with a corresponding emission bandwidth of 1.05 THz ans a stable and narrow (4.15 KHz) beatnote detected with a signal-to-noise ratio of 34 dB. Analysis of the electrical and thermal beatnote tuning reveals a current-tuning coefficient ranging between 5 MHz/mA and 2.1 MHz/mA and a temperature-tuning coefficient of -4 MHz/K. The ability to tune the THz QCL combs over their full dynamic range by temperature and current paves the way for their use as powerful spectroscopy tool that can provide broad frequency coverage combined with high precision spectral accuracy.
123 - Shuai Lin , Shukai Yu , 2018
We present a method to measure quadratic Terahertz optical nonlinearities in Terahertz time-domain spectroscopy. We use a rotating linear polarizer (a polarizing chopper) to modulate the amplitude of the incident THz pulse train. We use a phase-sensi tive lock-in detection at the fundamental and the second harmonic of the modulation frequency to separate the materials responses that are linear and quadratic in Terahertz electric field. We demonstrate this method by measuring the quadratic Terahertz Kerr effect in the presence of the much stronger linear electro-optic effect in the (110) GaP crystal. We propose that the method can be used to detect Terahertz second harmonic generation in noncentrosymmetric media in time-domain spectroscopy, with broad potential applications in nonlinear Terahertz photonics and related technology.
We present an electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth and we exploit it to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal-gr ating used as a gate electrode, with an HfO2/AlOx gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. We get 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9 _ 2.7 THz range. We then integrate our modulator with a multimode THz QCL. By adjusting the modulator operational bandwidth, we demonstrate that the graphene modulator can partially compensates the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the laser operational range, with 98 equidistant optical modes and with a spectral coverage of ~ 1.2 THz. This has significant potential for frontier applications in the terahertz, as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and as a metrological tool for spectroscopy at THz frequencies.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا