ترغب بنشر مسار تعليمي؟ اضغط هنا

Propagation of Picosecond Pulses on Superconducting Transmission Line Interconnects

458   0   0.0 ( 0 )
 نشر من قبل Quentin Herr
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Interconnects are a major discriminator for superconducting digital technology, enabling energy efficient data transfer and high-bandwidth heterogeneous integration. We report a method to simulate propagation of picosecond pulses in superconducting passive transmission lines (PTLs). A frequency-domain propagator model obtained from the Ansys High Frequency Structure Simulator (HFSS) field solver is incorporated in a Cadence Spectre circuit model, so that the particular PTL geometry can be simulated in the time-domain. The Mattis-Bardeen complex conductivity of the superconductor is encoded in the HFSS field solver as a complex-conductivity insulator. Experimental and simulation results show that Nb 20 Ohm microstrip PTLs with 1um width can support propagation of a single-flux-quantum pulse up to 7mm and a double-flux-quantum pulse up to 28mm.



قيم البحث

اقرأ أيضاً

We report the amplification of 250~GHz pulses as short as 260~ps without observation of pulse broadening using a photonic-band-gap circuit gyrotron traveling-wave-amplifier. The gyrotron amplifier operates with 38~dB of device gain and 8~GHz of insta ntaneous bandwidth. The operational bandwidth of the amplifier can be tuned over 16 GHz by adjusting the operating voltage of the electron beam and the magnetic field. The amplifier uses a 30~cm long photonic-band-gap interaction circuit to confine the desired TE$_{03}$-like operating mode while suppressing lower order modes which can result in undesired oscillations. The circuit gain is $>$55~dB for a beam voltage of 23~kV and a current of 700~mA. These results demonstrate the wide bandwidths and high gain achievable with gyrotron amplifiers. The amplification of picosecond pulses of variable lengths, 260-800~ps, shows good agreement with theory using the coupled dispersion relation and the gain-spectrum of the amplifier as measured with quasi-CW input pulses.
195 - B. Foxen , J.Y. Mutus , E. Lucero 2017
We present a fabrication process for fully superconducting interconnects compatible with superconducting qubit technology. These interconnects allow for the 3D integration of quantum circuits without introducing lossy amorphous dielectrics. They are composed of indium bumps several microns tall separated from an aluminum base layer by titanium nitride which serves as a diffusion barrier. We measure the whole structure to be superconducting (transition temperature of 1.1$,$K), limited by the aluminum. These interconnects have an average critical current of 26.8$,$mA, and mechanical shear and thermal cycle testing indicate that these devices are mechanically robust. Our process provides a method that reliably yields superconducting interconnects suitable for use with superconducting qubits.
Impedance matching is one of the most important practice in wave engineering as it enables to maximize the power transfer from the signal source to the load in the wave system. Unfortunately, it is bounded by the Bode-Fano criterion that states, for any passive, linear and time-invariant matching network, a stringent tradeoff between the matching-bandwidth and efficiency; implying severe constraints on various electromagnetic and acoustic wave systems. Here, we propose a matching paradigm that overcome this issue by using a temporal switching of the parameters of a metamaterial-based transmission-line, thus revoking the time-invariance assumption underlying the Bode-Fano criterion. Using this scheme we show theoretically that an efficient wideband matching, beyond Bode-Fano bound, can be achieved for short-time pulses in challenging cases of very high contrast between the load and the generator impedances, and with significant load dispersion; situations common in e.g., small antennas matching, cloaking, with applications for ultra-wideband communication, high resolution imaging, and more.
An ultrafast qubit control concept is proposed to reduce the duration of operations with a single and multiple superconducting qubits. It is based on the generation of Ramsey fringes due to unipolar picosecond control pulses. The key role in the conc ept is played by the interference of waves of qubit states population propagating forward and backward in time. The influence of the shape and duration of control pulses on the contrast of the interference pattern is revealed in the frame of Ramseys paradigm. Protocols for observation of Ramsey oscillations and implementation of various gate operations are developed. We also suggest a notional engineering solution for creating the required picosecond control pulses with desired shape and amplitude. It is demonstrated that this makes it possible to control the quantum states of the system with the fidelity of more than 99%.
72 - F. T. Vasko 2017
We study a superconducting transmission line (TL) formed by distributed LC oscillators and excited by external magnetic fluxes which are aroused from random magnetization (A) placed in substrate or (B) distributed at interfaces of a two-wire TL. Low- frequency dynamics of a random magnetic field is described based on the diffusion Langevin equation with a short-range source caused by (a) random amplitude or (b) gradient of magnetization. For a TL modeled as a two-port network with open and shorted ends, the effective magnetic flux at the open end has non-local dependency on noise distribution along the TL. The flux-flux correlation function is evaluated and analyzed for the regimes (Aa), (Ab). (Ba), and (Bb). Essential frequency dispersion takes place around the inverse diffusion time of random flux along the TL. Typically, noise effect increases with size faster than the area of TL. The flux-flux correlator can be verified both via the population relaxation rate of the qubit, which is formed by the Josephson junction shunted by the TL with flux noises, and via random voltage at the open end of the TL.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا