ترغب بنشر مسار تعليمي؟ اضغط هنا

EMS and DMS Integration of the Coordinative Real-time Sub-Transmission Volt-Var Control Tool under High DER Penetration

50   0   0.0 ( 0 )
 نشر من قبل Xiaoyuan Fan
 تاريخ النشر 2021
والبحث باللغة English




اسأل ChatGPT حول البحث

This paper proposes an applicable approach to deploy the Coordinative Real-time Sub-Transmission Volt-Var Control Tool (CReST-VCT), and a holistic system integration framework considering both the energy management system (EMS) and distribution system management system (DMS). This provides an architectural basis and can serve as the implementation guideline of CReST-VCT and other advanced grid support tools, to co-optimize the operation benefits of distributed energy resources (DERs) and assets in both transmission and distribution networks. Potential communication protocols for different physical domains of a real application is included. Performance and security issues are also discussed, along with specific considerations for field deployment. Finally, the paper presents a viable pathway for CReST-VCT and other advanced grid support tools to be integrated in an open-source standardized-based platform that supports distribution utilities.



قيم البحث

اقرأ أيضاً

In an active power distribution system, Volt-VAR optimization (VVO) methods are employed to achieve network-level objectives such as minimization of network power losses. The commonly used model-based centralized and distributed VVO algorithms perfor m poorly in the absence of a communication system and with model and measurement uncertainties. In this paper, we proposed a model-free local Volt-VAR control approach for network-level optimization that does not require communication with other decision-making agents. The proposed algorithm is based on extremum-seeking approach that uses only local measurements to minimize the network power losses. To prove that the proposed extremum-seeking controller converges to the optimum solution, we also derive mathematical conditions for which the loss minimization problem is convex with respect to the control variables. Local controllers pose stability concerns during highly variable scenarios. Thus, the proposed extremum-seeking controller is integrated with an adaptive-droop control module to provide a stable local control response. The proposed approach is validated using IEEE 4-bus and IEEE 123-bus systems and achieves the loss minimization objective while maintaining the voltage within the pre-specific limits even during highly variable DER generation scenarios.
This paper develops a model-free volt-VAR optimization (VVO) algorithm via multi-agent deep reinforcement learning (MADRL) in unbalanced distribution systems. This method is novel since we cast the VVO problem in unbalanced distribution networks to a n intelligent deep Q-network (DQN) framework, which avoids solving a specific optimization model directly when facing time-varying operating conditions of the systems. We consider statuses/ratios of switchable capacitors, voltage regulators, and smart inverters installed at distributed generators as the action variables of the DQN agents. A delicately designed reward function guides these agents to interact with the distribution system, in the direction of reinforcing voltage regulation and power loss reduction simultaneously. The forward-backward sweep method for radial three-phase distribution systems provides accurate power flow results within a few iterations to the DQN environment. Finally, the proposed multi-objective MADRL method realizes the dual goals for VVO. We test this algorithm on the unbalanced IEEE 13-bus and 123-bus systems. Numerical simulations validate the excellent performance of this method in voltage regulation and power loss reduction.
87 - Haotian Liu , Wenchuan Wu 2021
In Volt/Var control (VVC) of active distribution networks(ADNs), both slow timescale discrete devices (STDDs) and fast timescale continuous devices (FTCDs) are involved. The STDDs such as on-load tap changers (OLTC) and FTCDs such as distributed gene rators should be coordinated in time sequence. Such VCC is formulated as a two-timescale optimization problem to jointly optimize FTCDs and STDDs in ADNs. Traditional optimization methods are heavily based on accurate models of the system, but sometimes impractical because of their unaffordable effort on modelling. In this paper, a novel bi-level off-policy reinforcement learning (RL) algorithm is proposed to solve this problem in a model-free manner. A Bi-level Markov decision process (BMDP) is defined to describe the two-timescale VVC problem and separate agents are set up for the slow and fast timescale sub-problems. For the fast timescale sub-problem, we adopt an off-policy RL method soft actor-critic with high sample efficiency. For the slow one, we develop an off-policy multi-discrete soft actor-critic (MDSAC) algorithm to address the curse of dimensionality with various STDDs. To mitigate the non-stationary issue existing the two agents learning processes, we propose a multi-timescale off-policy correction (MTOPC) method by adopting importance sampling technique. Comprehensive numerical studies not only demonstrate that the proposed method can achieve stable and satisfactory optimization of both STDDs and FTCDs without any model information, but also support that the proposed method outperforms existing two-timescale VVC methods.
Unmanned aerial vehicles (UAVs) play an increasingly important role in military, public, and civilian applications, where providing connectivity to UAVs is crucial for its real-time control, video streaming, and data collection. Considering that cell ular networks offer wide area, high speed, and secure wireless connectivity, cellular-connected UAVs have been considered as an appealing solution to provide UAV connectivity with enhanced reliability, coverage, throughput, and security. Due to the nature of UAVs mobility, the throughput, reliability and End-to-End (E2E) delay of UAVs communication under various flight heights, video resolutions, and transmission frequencies remain unknown. To evaluate these parameters, we develop a cellular-connected UAV testbed based on the Long Term Evolution (LTE) network with its uplink video transmission and downlink control&command (CC) transmission. We also design algorithms for sending control signal and controlling UAV. The indoor experimental results provide fundamental insights for the cellular-connected UAV system design from the perspective of transmission frequency, adaptability, and link outage, respectively.
This paper studies distributed optimal formation control with hard constraints on energy levels and termination time, in which the formation error is to be minimized jointly with the energy cost. The main contributions include a globally optimal dist ributed formation control law and a comprehensive analysis of the resulting closed-loop system under those hard constraints. It is revealed that the energy levels, the task termination time, the steady-state error tolerance, as well as the network topology impose inherent limitations in achieving the formation control mission. Most notably, the lower bounds on the achievable termination time and the required minimum energy levels are derived, which are given in terms of the initial formation error, the steady-state error tolerance, and the largest eigenvalue of the Laplacian matrix. These lower bounds can be employed to assert whether an energy and time constrained formation task is achievable and how to accomplish such a task. Furthermore, the monotonicity of those lower bounds in relation to the control parameters is revealed. A simulation example is finally given to illustrate the obtained results.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا