ترغب بنشر مسار تعليمي؟ اضغط هنا

One-pot green process to synthesize controllable surface terminations MXenes in molten salts

65   0   0.0 ( 0 )
 نشر من قبل Miao Shen
 تاريخ النشر 2021
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Surface terminations for 2D MXene have dramatic impacts on physicochemical properties. The commonly etching methods usually introduce -F surface termination or metallic into MXene. Here, we present a new molten salt assisted electrochemical etching (MS-E-etching) method to synthesize fluorine-free Ti3C2Tx without metallics. Due to performing electrons as reaction agent, the cathode reduction and anode etching can be spatially isolated, thus no metallic presents in Ti3C2Tx product. Moreover, the Tx surface terminations can be directly modified from -Cl to -O and/or -S in one pot process. The obtained -O terminated MXenes exhibited capacitance of 225 and 205 F/g at 1 and 10 A/g, confirming high reversibility of redox reactions. This one-pot process greatly shortens the modification procedures as well as enriches the surface functional terminations. More importantly, the recovered salt after synthesis can be recycled and reused, which brands it as a green sustainable method.



قيم البحث

اقرأ أيضاً

114 - Mian Li , Jun Lu , Kan Luo 2019
Nanolaminated materials are important because of their exceptional properties and wide range of applications. Here, we demonstrate a general approach to synthesize a series of Zn-based MAX phases and Cl-terminated MXenes originating from the replacem ent reaction between the MAX phase and the late transition metal halides. The approach is a top-down route that enables the late transitional element atom (Zn in the present case) to occupy the A site in the pre-existing MAX phase structure. Using this replacement reaction between Zn element from molten ZnCl2 and Al element in MAX phase precursors (Ti3AlC2, Ti2AlC, Ti2AlN, and V2AlC), novel MAX phases Ti3ZnC2, Ti2ZnC, Ti2ZnN, and V2ZnC were synthesized. When employing excess ZnCl2, Cl terminated MXenes (such as Ti3C2Cl2 and Ti2CCl2) were derived by a subsequent exfoliation of Ti3ZnC2 and Ti2ZnC due to the strong Lewis acidity of molten ZnCl2. These results indicate that A-site element replacement in traditional MAX phases by late transition metal halides opens the door to explore MAX phases that are not thermodynamically stable at high temperature and would be difficult to synthesize through the commonly employed powder metallurgy approach. In addition, this is the first time that exclusively Cl-terminated MXenes were obtained, and the etching effect of Lewis acid in molten salts provides a green and viable route to prepare MXenes through an HF-free chemical approach.
Molecular dynamics simulations of the temperature dependent crystal growth rates of the salts, NaCl and ZnS, from their melts are reported, along with those of a number of pure metals. The growth rate of NaCl and the FCC-forming metals show little ev idence of activated control, while that of ZnS and Fe, a BCC forming metal, exhibit activation barriers similar to those observed for diffusion in the melt. Unlike ZnS and Fe, the interfacial inherent structures of NaCl and Cu and Ag are found to be crystalline. We calculate the median displacement between the interfacial liquid and crystalline states and show that this distance is smaller than the cage length, demonstrating that crystal growth in the fast crystallizers can occur via local vibrations and so largely avoid the activated kinetics associated with the larger displacements associated with particle transport.
246 - Haoming Ding , Youbing Li , Jun Lu 2019
New MAX phases Ti2(AlxCu1-x)N and Nb2CuC were synthesized by A-site replacement by reacting Ti2AlN and Nb2AlC, respectively, with CuCl2 or CuI molten salt. X-ray diffraction, scanning electron microscopy, and atomically-resolved scanning transmission electron microscopy showed complete A-site replacement in Nb2AlC, which lead to formation of Nb2CuC. However, the replacement of Al in Ti2AlN phase was only close to complete at Ti2(Al0.1Cu0.9)N. Density-functional theory calculations corroborated the structural stability of Nb2CuC and Ti2CuN phases. Moreover, the calculated cleavage energy in these Cu-containing MAX phases are weaker than in their Al-containing counterparts, indicating that they are precursor candidates for MXene derivation.
Environmental concerns are the chief drive for more innovative recycling techniques for end-of-life polymeric products. One attractive option is taking advantage of C and H content of polymeric waste in steelmaking industry. In this work, we examined the interaction of two high production polymers, i.e., polyurethane and polysulfide with molten iron using ab initio molecular dynamics simulation. We demonstrate that both polymers can be used as carburizers for molten iron. Additionally, we found that light weight H$_2$ and CH$_x$ molecules were released as by-products of the polymer-molten iron interaction. The outcomes of this study will have applications in the carburization of molten iron during ladle metallurgy and waste plastic injection in electric arc furnace.
The family of MAX phases and their derivative MXenes are continuously growing in terms of both crystalline and composition varieties. In the last couple of years, several breakthroughs have been achieved that boosted the synthesis of novel MAX phases with ordered double transition metals and, consequently, the synthesis of novel MXenes with a higher chemical diversity and structural complexity, rarely seen in other families of two-dimensional (2D) materials. Considering the various elemental composition possibilities, surface functional tunability, various magnetic orders, and large spin$-$orbit coupling, MXenes can truly be considered as multifunctional materials that can be used to realize highly correlated phenomena. In addition, owing to their large surface area, hydrophilicity, adsorption ability, and high surface reactivity, MXenes have attracted attention for many applications, e.g., catalysts, ion batteries, gas storage media, and sensors. Given the fast progress of MXene-based science and technology, it is timely to update our current knowledge on various properties and possible applications. Since many theoretical predictions remain to be experimentally proven, here we mainly emphasize the physics and chemistry that can be observed in MXenes and discuss how these properties can be tuned or used for different applications.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا