ترغب بنشر مسار تعليمي؟ اضغط هنا

Spatial Mapping of Electrostatics and Dynamics across 2D Heterostructures

114   0   0.0 ( 0 )
 نشر من قبل Akshay Murthy
 تاريخ النشر 2020
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

In situ electron microscopy is a key tool for understanding the mechanisms driving novel phenomena in 2D structures. Unfortunately, due to various practical challenges, technologically relevant 2D heterostructures prove challenging to address with electron microscopy. Here, we use the differential phase contrast imaging technique to build a methodology for probing local electrostatic fields during electrical operation with nanoscale precision in such materials. We find that by combining a traditional DPC setup with a high pass filter, we can largely eliminate electric fluctuations emanating from short-range atomic potentials. With this method, a priori electric field expectations can be directly compared with experimentally derived values to readily identify inhomogeneities and potentially problematic regions. We use this platform to analyze the electric field and charge density distribution across layers of hBN and MoS2.



قيم البحث

اقرأ أيضاً

Motivated by recent advances on local conductance measurement techniques at the nanoscale, timely questions are being raised about what possible information can be extracted from a disordered material by selectively interrogating its transport proper ties. Here we demonstrate how an inversion technique originally developed to identify the number of scatterers in a quantum device can be adapted to a multi-terminal setup in order to provide detailed information about the spatial distribution of impurities on the surface of a 2D material. The methodology input are conductance readings (for instance, as a function of the chemical potential) between different electrode pairs, the output being the spatially resolved impurity density. We show that the obtained spatial resolution depends not only on the number of conductance measurements but also on the electrode dimensions. Furthermore, when implemented with electrodes in a grid-like geometry, this inversion procedure resembles a Sudoku puzzle in which the compositions of different sectors of a device are found by imposing that they must add up to specific constrained values established for the grid rows and columns. We argue that this technique may be used with other quantities besides the conductance, paving the way to alternative new ways of extracting information from a disordered material through the selective probing of local quantities.
At the interface between complex insulating oxides, novel phases with interesting properties may occur, such as the metallic state reported in the LaAlO3/SrTiO3 system. While this state has been predicted and reported to be confined at the interface, some works indicate a much broader spatial extension, thereby questioning its origin. Here we provide for the first time a direct determination of the carrier density profile of this system through resistance profile mappings collected in cross-section LaAlO3/SrTiO3 samples with a conducting-tip atomic force microscope (CT-AFM). We find that, depending upon specific growth protocols, the spatial extension of the high-mobility electron gas can be varied from hundreds of microns into SrTiO3 to a few nanometers next to the LaAlO3/SrTiO3 interface. Our results emphasize the potential of CT-AFM as a novel tool to characterize complex oxide interfaces and provide us with a definitive and conclusive way to reconcile the body of experimental data in this system.
Transition metal dichalcogenide monolayers such as MoSe2,MoS2 and WSe2 are direct bandgap semiconductors with original optoelectronic and spin-valley properties. Here we report spectrally sharp, spatially localized emission in monolayer MoSe2. We fin d this quantum dot like emission in samples exfoliated onto gold substrates and also suspended flakes. Spatial mapping shows a correlation between the location of emitters and the existence of wrinkles (strained regions) in the flake. We tune the emission properties in magnetic and electric fields applied perpendicular to the monolayer plane. We extract an exciton g-factor of the discrete emitters close to -4, as for 2D excitons in this material. In a charge tunable sample we record discrete jumps on the meV scale as charges are added to the emitter when changing the applied voltage. The control of the emission properties of these quantum dot like emitters paves the way for further engineering of the light matter interaction in these atomically thin materials.
The paper concerns the nanopowder high-speed, $10^4$ - $10^9$ s${}^{-1}$, compaction processes modeling by a two-dimensional granular dynamics method. Nanoparticles interaction, in addition to known contact laws, included dispersive attraction, forma tion of a strong interparticle bonding (powder agglomeration) as well as the forces caused by viscous stresses in the contact region. For different densification rates, the pressure vs. density curves (densification curves) were calculated. Relaxation of the stresses after the compression stage was analyzed as well. The densification curves analysis allowed us to suggest the dependence of compaction pressure as a function of strain rate. It was found that in contrast to the plastic flow of metals, where the yield strength is proportional to the logarithm of the strain rate, the power-law dependence of applied pressure on the strain rate as $ppropto v^{1/4}$ was established for the modeled nanosized powders.
135 - Chia-Hao Lee 2020
2D materials offer an ideal platform to study the strain fields induced by individual atomic defects, yet challenges associated with radiation damage have so-far limited electron microscopy methods to probe these atomic-scale strain fields. Here, we demonstrate an approach to probe single-atom defects with sub-picometer precision in a monolayer 2D transition metal dichalcogenide, WSe$_{2-2x}$Te$_{2x}$. We utilize deep learning to mine large datasets of aberration-corrected scanning transmission electron microscopy images to locate and classify point defects. By combining hundreds of images of nominally identical defects, we generate high signal-to-noise class-averages which allow us to measure 2D atomic coordinates with up to 0.3 pm precision. Our methods reveal that Se vacancies introduce complex, oscillating strain fields in the WSe$_{2-2x}$Te$_{2x}$ lattice which cannot be explained by continuum elastic theory. These results indicate the potential impact of computer vision for the development of high-precision electron microscopy methods for beam-sensitive materials.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا