ترغب بنشر مسار تعليمي؟ اضغط هنا

A scalable control design for grid-forming inverters in microgrids

141   0   0.0 ( 0 )
 نشر من قبل Jeremy Watson
 تاريخ النشر 2020
  مجال البحث الهندسة المعلوماتية
والبحث باللغة English




اسأل ChatGPT حول البحث

Microgrids are increasingly recognized as a key technology for the integration of distributed energy resources into the power network, allowing local clusters of load and distributed energy resources to operate autonomously. However, microgrid operation brings new challenges, especially in islanded operation as frequency and voltage control are no longer provided by large rotating machines. Instead, the power converters in the microgrid must coordinate to regulate the frequency and voltage and ensure stability. We consider the problem of designing controllers to achieve these objectives. Using passivity theory to derive decentralized stability conditions for the microgrid, we propose a control design method for grid-forming inverters. For the analysis we use higher-order models for the inverters and also advanced dynamic models for the lines with an arbitrarily large number of states. By satisfying the decentralized condition formulated, plug-and-play operation can be achieved with guaranteed stability, and performance can also be improved by incorporating this condition as a constraint in corresponding optimization problems formulated. In addition, our control design can improve the power sharing properties of the microgrid compared to previous non-droop approaches. Finally, realistic simulations confirm that the controller design improves the stability and performance of the power network.

قيم البحث

اقرأ أيضاً

Power electronic converters for integrating renewable energy resources into power systems can be divided into grid-forming and grid-following inverters. They possess certain similarities, but several important differences, which means that the relati onship between them is quite subtle and sometimes obscure. In this article, a new perspective based on duality is proposed to create new insights. It successfully unifies the grid interfacing and synchronization characteristics of the two inverter types in a symmetric, elegant, and technology-neutral form. Analysis shows that the grid-forming and grid-following inverters are duals of each other in several ways including a) synchronization controllers: frequency droop control and phase-locked loop (PLL); b) grid-interfacing characteristics: current-following voltage-forming and voltage-following current-forming; c) swing characteristics: current-angle swing and voltage-angle swing; d) inner-loop controllers: output impedance shaping and output admittance shaping; and e) grid strength compatibility: strong-grid instability and weak-grid instability. The swing equations are also derived in dual form for two inverter types, which reveal the dynamic interaction between the grid strength, the synchronization controllers, and the inner-loop controllers. Insights are generated into cases of poor stability. The theoretical analysis and time-domain simulation results are used to illustrate cases of instability for simple single-inverter-infinite-bus systems and a multi-inverter power network.
The grid-forming converter is an important unit in the future power system with more inverter-interfaced generators. However, improving its performance is still a key challenge. This paper proposes a generalized architecture of the grid-forming conve rter from the view of multivariable feedback control. As a result, many of the existing popular control strategies, i.e., droop control, power synchronization control, virtual synchronous generator control, matching control, dispatchable virtual oscillator control, and their improved forms are unified into a multivariable feedback control transfer matrix working on several linear and nonlinear error signals. Meanwhile, unlike the traditional assumptions of decoupling between AC and DC control, active power and reactive power control, the proposed configuration simultaneously takes all of them into consideration, which therefore can provide better performance. As an example, a new multi-input-multi-output-based grid-forming (MIMO-GFM) control is proposed based on the generalized configuration. To cope with the multivariable feedback, an optimal and structured $H_{infty}$ synthesis is used to design the control parameters. At last, simulation and experimental results show superior performance and robustness of the proposed configuration and control.
Deriving fast and effectively coordinated control actions remains a grand challenge affecting the secure and economic operation of todays large-scale power grid. This paper presents a novel artificial intelligence (AI) based methodology to achieve mu lti-objective real-time power grid control for real-world implementation. State-of-the-art off-policy reinforcement learning (RL) algorithm, soft actor-critic (SAC) is adopted to train AI agents with multi-thread offline training and periodic online training for regulating voltages and transmission losses without violating thermal constraints of lines. A software prototype was developed and deployed in the control center of SGCC Jiangsu Electric Power Company that interacts with their Energy Management System (EMS) every 5 minutes. Massive numerical studies using actual power grid snapshots in the real-time environment verify the effectiveness of the proposed approach. Well-trained SAC agents can learn to provide effective and subsecond control actions in regulating voltage profiles and reducing transmission losses.
We propose a reachability approach for infinite and finite horizon multi-objective optimization problems for low-thrust spacecraft trajectory design. The main advantage of the proposed method is that the Pareto front can be efficiently constructed fr om the zero level set of the solution to a Hamilton-Jacobi-Bellman equation. We demonstrate the proposed method by applying it to a low-thrust spacecraft trajectory design problem. By deriving the analytic expression for the Hamiltonian and the optimal control policy, we are able to efficiently compute the backward reachable set and reconstruct the optimal trajectories. Furthermore, we show that any reconstructed trajectory will be guaranteed to be weakly Pareto optimal. The proposed method can be used as a benchmark for future research of applying reachability analysis to low-thrust spacecraft trajectory design.
173 - Tamer Basar , Sean Meyn , 2020
This is a collection of the lecture notes of the three authors for a first-year graduate course on control system theory and design (ECE 515 , formerly ECE 415) at the ECE Department of the University of Illinois at Urbana-Champaign. This is a fundam ental course on the modern theory of dynamical systems and their control, and builds on a first-level course in control that emphasizes frequency-domain methods (such as the course ECE 486 , formerly ECE 386, at UIUC ). The emphasis in this graduate course is on state space techniques, and it encompasses modeling , analysis (of structural properties of systems, such as stability, controllability, and observability), synthesis (of observers/compensators and controllers) subject to design specifications, and optimization . Accordingly, this set of lecture notes is organized in four parts, with each part dealing with one of the issues identified above. Concentration is on linear systems , with nonlinear systems covered only in some specific contexts, such as stability and dynamic optimization. Both continuous-time and discrete-time systems are covered, with the former, however, in much greater depth than the latter. The main objective of this course is to teach the student some fundamental principles within a solid conceptual framework, that will enable her/him to design feedback loops compatible with the information available on the states of the system to be controlled, and by taking into account considerations such as stability, performance, energy conservation, and even robustness. A second objective is to familiarize her/him with the available modern computational, simulation, and general software tools that facilitate the design of effective feedback loops
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا