اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدGeometrical Characterization of Glass Nanopipettes with Sub-10 nm Pore Diameter by Transmission Electron Microscopy
63
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Glass nanopipettes are widely used for various applications in nanosciences. In most of the applications, it is important to characterize their geometrical parameters, such as the aperture size and the inner cone angle at the tip region. For nanopipettes with sub-10 nm aperture and thin wall thickness, transmission electron microscopy (TEM) must be most instrumental in their precise geometrical measurement. However, this measurement has remained a challenge because heat generated by electron beam irradiation would largely deform sub-10-nm nanopipettes. Here we provide methods for preparing TEM specimens that do not cause deformation of such tiny nanopipettes.
قيم البحث
اقرأ أيضاً
Typically, utilization of small nanopipettes results in either high sensitivity or spatial resolution in modern nanoscience and nanotechnology. However, filling a nanopipette with a sub-10-nm pore diameter remains a significant challenge. Here, we in
troduce a thermally driven approach to filling sub-10-nm pipettes with batch production, regardless of their shape. A temperature gradient is applied to transport water vapor from the backside of nanopipettes to the tip region until bubbles are completely removed from this region. The electrical contact and pore size for filling nanopipettes are confirmed by current-voltage and transmission electron microscopy (TEM) measurements, respectively. In addition, we quantitatively compare the pore size between the TEM characterization and estimation on the basis of pore radius and conductance. The validity of this method provides a foundation for highly sensitive detection of single molecules and high spatial resolution imaging of nanostructures.
In the quest for dynamic multimodal probing of a materials structure and functionality, it is critical to be able to quantify the chemical state on the atomic and nanoscale using element specific electronic and structurally sensitive tools such as el
ectron energy loss spectroscopy (EELS). Ultrafast EELF, with combined energy, time, and spatial resolution in a transmission electron microscope, has recently enabled transformative studies of photo excited nanostructure evolution and mapping of evanescent electromagnetic fields. This article aims to describe the state of the art experimental techniques in this emerging field and its major uses and future applications.
Electron microscopy (EM) has been instrumental in our understanding of biological systems ranging from subcellular structures to complex organisms. Although EM reveals cellular morphology with nanoscale resolution, it does not provide information on
the location of proteins within a cellular context. An EM-based bioimaging technology capable of localizing individual proteins and resolving protein-protein interactions with respect to cellular ultrastructure would provide important insights into the molecular biology of a cell. Here, we report on the development of luminescent nanoprobes potentially suitable for labeling biomolecules in a multicolor EM modality. In this approach, the labels are based on lanthanide-doped nanoparticles that emit light under electron excitation in a process known as cathodoluminescence (CL). Our results suggest that the optimization of nanoparticle composition, synthesis protocols and electron imaging conditions could enable high signal-to-noise localization of biomolecules with a sub-20-nm resolution, limited only by the nanoparticle size. In ensemble measurements, these luminescent labels exhibit narrow spectra of nine distinct colors that are characteristic of the corresponding rare-earth dopant type.
Ultrashort, low-emittance electron pulses can be created at a high repetition rate by using a TM$_{110}$ deflection cavity to sweep a continuous beam across an aperture. These pulses can be used for time-resolved electron microscopy with atomic spati
al and temporal resolution at relatively large average currents. In order to demonstrate this, a cavity has been inserted in a transmission electron microscope, and picosecond pulses have been created. No significant increase of either emittance or energy spread has been measured for these pulses. At a peak current of $814pm2$ pA, the root-mean-square transverse normalized emittance of the electron pulses is $varepsilon_{n,x}=(2.7pm0.1)cdot 10^{-12}$ m rad in the direction parallel to the streak of the cavity, and $varepsilon_{n,y}=(2.5pm0.1)cdot 10^{-12}$ m rad in the perpendicular direction for pulses with a pulse length of 1.1-1.3 ps. Under the same conditions, the emittance of the continuous beam is $varepsilon_{n,x}=varepsilon_{n,y}=(2.5pm0.1)cdot 10^{-12}$ m rad. Furthermore, for both the pulsed and the continuous beam a full width at half maximum energy spread of $0.95pm0.05$ eV has been measured.
The Helium Ion Microscope (HIM) has the capability to image small features with a resolution down to 0.35 nm due to its highly focused gas field ionization source and its small beam-sample interaction volume. In this work, the focused helium ion beam
of a HIM is utilized to create nanopores with diameters down to 1.3 nm. It will be demonstrated that nanopores can be milled into silicon nitride, carbon nanomembranes (CNMs) and graphene with well-defined aspect ratio. To image and characterize the produced nanopores, helium ion microscopy and high resolution scanning transmission electron microscopy were used. The analysis of the nanopores growth behavior, allows inferring on the profile of the helium ion beam.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
