اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAn accelerator facility for intermediate energy proton irradiation and testing of nuclear materials
82
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The bulk irradiation of materials with 10-30 MeV protons promises to advance the study of radiation damage for fission and fusion power plants. Intermediate energy proton beams can now be dedicated to materials irradiation within university-scale laboratories. This paper describes the first such facility, with an Ionetix ION-12SC cyclotron producing 12 MeV proton beams. Samples are mm-scale tensile specimens with thicknesses up to 300 um, mounted to a cooled beam target with control over temperature. A specialized tensile tester for radioactive specimens at high temperature (500+ {deg}C) and/or vacuum represents the conditions in fission and fusion systems, while a digital image correlation system remotely measures strain. Overall, the facility provides university-scale irradiation and testing capability with intermediate energy protons to complement traditional in-core fission reactor and micro-scale ion irradiation. This facility demonstrates that bulk proton irradiation is a scalable and effective approach for nuclear materials research, down-selection, and qualification.
قيم البحث
اقرأ أيضاً
The experimental research on the irradiation of the functional design materials by the Helium ions in the linear accelerator is conducted. The experimental measurements techniques and data on the irradiation of the functional design materials by the
Helium ions with the energy up to 4 MeV, including the detailed scheme of experimental measurements setup, are presented. The new design of accelerating structure of the IH-type such as POS-4, using the method of alternate-phase focusing with the step-by-step change of the synchronous phase along the focusing periods in a linear accelerator, is developed with the aim to irradiate the functional design materials by the Helium ions. The new design of the injector of the charged Helium ions with the energy of 120 KeV at the output of an accelerating tube and the accelerating structure of the type of POS-4 for the one time charged Helium ions acceleration in the linear accelerator are researched and developed. The special chamber for the irradiation of functional design materials by the Helium ions is also created. In the process of experiment, the temperature of a sample, the magnitude of current of Helium ions beam and the irradiation dose of sample are measured precisely. The experimental measurement setup and techniques are fully tested and optimized in the course of the research on the electro-physical properties of irradiated samples and the thermal-desorption of Helium ions in a wide range of temperatures
The intense neutron source for development of fusion materials planned by international collaboration makes a new step to clarify the technical issues for realizing the 40 MeV, 250 mA deuteron beam facility. The baseline concept employs two identical
125 mA linac modules whose beams are combined at the flowing lithium target. Recent work for reducing the cost loading concerns the staged deployment of the full irradiation capability in three steps. The Japanese activity about the design and development study about IFMIF accelerator in this year is presented and the schedule of next several years is overviewed.
The compact material irradiation facility (CMIF) is a current project in China that will provide a compact deuteron-beryllium neutron source. The target of this facility will be an intense and compact Isotope Decay-At-Rest (IsoDAR) neutrino source. I
n this paper, we propose to test the sterile neutrino hypothesis using CMIF as the neutrino source. At CMIF platform, the electron antineutrino production rate can be up to $2.0times 10^{19}$ per day. When paired with an 80 t liquid scintillator detector to study short baseline electron antineutrino disappearance, the inverse beta decay (IBD) event rate is large enough to investigate the parameter ranges of interest for neutrino anomalies. Our sensitivity analysis shows that a short baseline experiment at this platform will provide a very competitive sterile neutrino search, especially in the high-$Delta m^2$ region ($Delta m^2 >10,text{eV}^2$).
10 MeV proton-irradiation effects on a YBCO-based test structure were analyzed by measuring its current-voltage (IV) characteristics for different cumulated fluences. For fluences of up to $sim$80$cdot$10$^9$~p/cm$^2$ no changes in the electrical beh
avior of the device were observed, while for a fluence of $sim$~300$cdot$10$^9~$ p/cm$^2$ it becomes less conducting. A detailed analysis of the room temperature IV characteristics based on the $gamma$ power exponent parameter [$gamma=dLn(I)/dLn(V)$] allowed us to reveal the main conduction mechanisms as well as to establish the equivalent circuit model of the device. The changes produced in the electrical behavior, in accordance with Monte Carlo TRIM simulations, suggest that the main effect induced by protons is the displacement of oxygen atoms within the YBCO lattice, particularly from oxygen-rich to oxygen-poor areas, where they become trapped.
Introducing an isolated intermediate band (IB) into a wide band gap semiconductor can potentially improve the optical absorption of the material beyond the Shockley-Queisser limitation for solar cells. Here, we present a systematic study of the therm
odynamic stability, electronic structures, and optical properties of transition metals (M = Ti, V, and Fe) doped CuAlSe2 for potential IB thin film solar cells, by adopting the first-principles calculation based on the hybrid functional method. We found from chemical potential analysis that for all dopants considered, the stable doped phase only exits when the Al atom is substituted. More importantly, with this substitution, the IB feature is determined by $3d$ electronic nature of M^{3+} ion, and the electronic configuration of 3d^1 can drive a optimum IB that possesses half-filled character and suitable subbandgap from valence band or conduction band. We further show that Ti-doped CuAlSe2 is the more promising candidate for IB materials since the resulted IB in it is half filled and extra absorption peaks occurs in the optical spectrum accompanied with a largely enhanced light absorption intensity. The result offers a understanding for IB induced by transition metals into CuAlSe2 and is significant to fabricate the related IB materials.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
