ترغب بنشر مسار تعليمي؟ اضغط هنا

Joint Collaboration and Compression Design for Distributed Sequential Estimation in a Wireless Sensor Network

73   0   0.0 ( 0 )
 نشر من قبل Xiancheng Cheng
 تاريخ النشر 2020
  مجال البحث هندسة إلكترونية
والبحث باللغة English




اسأل ChatGPT حول البحث

In this work, we propose a joint collaboration-compression framework for sequential estimation of a random vector parameter in a resource constrained wireless sensor network (WSN). Specifically, we propose a framework where the local sensors first collaborate (via a collaboration matrix) with each other. Then a subset of sensors selected to communicate with the FC linearly compress their observations before transmission. We design near-optimal collaboration and linear compression strategies under power constraints via alternating minimization of the sequential minimum mean square error. We show that the objective function for collaboration design can be non-convex depending on the network topology. We reformulate and solve the collaboration design problem using quadratically constrained quadratic program (QCQP). Moreover, the compression design problem is also formulated as a QCQP. We propose tw



قيم البحث

اقرأ أيضاً

In this paper, we consider the problem of distributed sequential detection using wireless sensor networks (WSNs) in the presence of imperfect communication channels between the sensors and the fusion center (FC). We assume that sensor observations ar e spatially dependent. We propose a copula-based distributed sequential detection scheme that characterizes the spatial dependence. Specifically, each local sensor collects observations regarding the phenomenon of interest and forwards the information obtained to the FC over noisy channels. The FC fuses the received messages using a copula-based sequential test. Moreover, we show the asymptotic optimality of the proposed copula-based sequential test. Numerical experiments are conducted to demonstrate the effectiveness of our approach.
In this paper we investigate fusion rules for distributed detection in large random clustered-wireless sensor networks (WSNs) with a three-tier hierarchy; the sensor nodes (SNs), the cluster heads (CHs) and the fusion center (FC). The CHs collect the SNs local decisions and relay them to the FC that then fuses them to reach the ultimate decision. The SN-CH and the CH-FC channels suffer from additive white Gaussian noise (AWGN). In this context, we derive the optimal log-likelihood ratio (LLR) fusion rule, which turns out to be intractable. So, we develop a sub-optimal linear fusion rule (LFR) that weighs the clusters data according to both its local detection performance and the quality of the communication channels. In order to implement it, we propose an approximate maximum likelihood based LFR (LFR-aML), which estimates the required parameters for the LFR. We also derive Gaussian-tail upper bounds for the detection and false alarms probabilities for the LFR. Furthermore, an optimal CH transmission power allocation strategy is developed by solving the Karush-Kuhn-Tucker (KKT) conditions for the related optimization problem. Extensive simulations show that the LFR attains a detection performance near to that of the optimal LLR and confirms the validity of the proposed upper bounds. Moreover, when compared to equal power allocation, simulations show that our proposed power allocation strategy achieves a significant power saving at the expense of a small reduction in the detection performance.
185 - Feng Xia , Yu-Chu Tian , Yanjun Li 2008
Wireless sensor/actuator networks (WSANs) are emerging as a new generation of sensor networks. Serving as the backbone of control applications, WSANs will enable an unprecedented degree of distributed and mobile control. However, the unreliability of wireless communications and the real-time requirements of control applications raise great challenges for WSAN design. With emphasis on the reliability issue, this paper presents an application-level design methodology for WSANs in mobile control applications. The solution is generic in that it is independent of the underlying platforms, environment, control system models, and controller design. To capture the link quality characteristics in terms of packet loss rate, experiments are conducted on a real WSAN system. From the experimental observations, a simple yet efficient method is proposed to deal with unpredictable packet loss on actuator nodes. Trace-based simulations give promising results, which demonstrate the effectiveness of the proposed approach.
In this paper, we design and experiment a far-field wireless power transfer (WPT) architecture based on distributed antennas, so-called WPT DAS, that dynamically selects transmit antenna and frequency to increase the output dc power. Uniquely, spatia l and frequency diversities are jointly exploited in the proposed WPT DAS with low complexity, low cost, and flexible deployment to combat the wireless fading channel. A numerical experiment is designed to show the benefits using antenna and frequency selections in spatially and frequency selective fading channels for single-user and multi-user cases. Accordingly, the proposed WPT DAS for single-user and two-user cases is prototyped. At the transmitter, we adopt antenna selection to exploit spatial diversity and adopt frequency selection to exploit frequency diversity. A low-complexity over-the-air limited feedback using an IEEE 802.15.4 RF interface is designed for antenna and frequency selections and reporting from the receiver to the transmitter. The proposed WPT DAS prototype is demonstrated in a real indoor environment. The measurements show that WPT DAS can boost the output dc power by up to 30 dB in single-user case and boost the sum of output dc power by up to 21.8 dB in two-user case and broaden the service coverage area in a low cost, low complexity, and flexible manner.
Wireless sensor networks as the base support for the Internet of things has been a large number of popularity and application. Such as intelligent agriculture, we have to use the sensor network to obtain the growth environmental data of crops, etc.. However, the difficulty of power supply of wireless nodes has seriously hindered the application and development of Internet of things. In order to solve this problem, people use low-power, sleep scheduling and other energy-saving methods on the nodes. Although these methods can prolong the working time of nodes, they will eventually become invalid because of the exhaustion of energy. The use of solar energy, wind energy, and wireless signals in the environment to obtain energy is another way to solve the energy problem of nodes. However, these methods are affected by weather, environment and other factors, and are unstable. Thus, the discontinuity work of the node is caused. In recent years, the development of wireless power transfer (WPT) has brought another solution to this problem. In this paper, a three-layer framework is proposed for mobile station data collection in rechargeable wireless sensor networks to keep the node running forever, named TLFW which includes the sensor layer, cluster head layer, and mobile station layer. And the framework can minimize the total energy consumption of the system. The simulation results show that the scheme can reduce the energy consumption of the entire system, compared with a Mobile Station in a Rechargeable Sensor Network(MSiRSN).
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا