اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدStabilization of NbTe3, VTe3, and TiTe3 via Nanotube Encapsulation
387
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The structure of MX3 transition metal trichalcogenides (TMTs, with M a transition metal and X a chalcogen) is typified by one-dimensional (1D) chains weakly bound together via van der Waals interactions. This structural motif is common across a range of M and X atoms (e.g. NbSe3, HfTe3, TaS3), but not all M and X combinations are stable. We report here that three new members of the MX3 family which are not stable in bulk, specifically NbTe3, VTe3, and TiTe3, can be synthesized in the few- to single-chain limit via nano-confined growth within the stabilizing cavity of multi-walled carbon nanotubes. Transmission electron microscopy (TEM) and atomic-resolution scanning transmission electron microscopy (STEM) reveal the chain-like nature and the detailed atomic structure. The synthesized materials exhibit behavior unique to few-chain quasi-1D structures, such as multi-chain spiraling and a trigonal anti-prismatic rocking distortion in the single-chain limit. Density functional theory (DFT) calculations provide insight into the crystal structure and stability of the materials, as well as their electronic structure.
قيم البحث
اقرأ أيضاً
Gallium selenide (GaSe) is a novel two-dimensional material, which belongs to the layered III-VIA semiconductors family and attracted interest recently as it displays single-photon emitters at room temperature and strong optical non-linearity. Noneth
eless, few-layer GaSe is not stable under ambient conditions and it tends to degrade over time. Here we combine atomic force microscopy, Raman spectroscopy and optoelectronic measurements in photodetectors based on thin GaSe to study its long-term stability. We found that the GaSe flakes exposed to air tend to decompose forming firstly amorphous selenium and Ga2Se3 and subsequently Ga2O3. While the first stage is accompanied by an increase in photocurrent, in the second stage we observe a decrease in photocurrent which leads to the final failure of GaSe photodetectors. Additionally, we found that the encapsulation of the GaSe photodetectors with hexagonal boron nitride (h-BN) can protect the GaSe from degradation and can help to achieve long-term stability of the devices.
Two-dimensional (2D) transition metal dichalcogenides (TMDCs) are the subject of intense investigation for applications in optics, electronics, catalysis, and energy storage. Their optical and electronic properties can be significantly enhanced when
encapsulated in an environment that is free of charge disorder. Because hexagonal boron nitride (h-BN) is atomically thin, highly-crystalline, and is a strong insulator, it is one of the most commonly used 2D materials to encapsulate and passivate TMDCs. In this report, we examine how ultrathin h-BN shields an underlying MoS2 TMDC layer from the energetic argon plasmas that are routinely used during semiconductor device fabrication and post-processing. Aberration-corrected Scanning Transmission Electron Microscopy is used to analyze defect formation in both the h-BN and MoS2 layers, and these observations are correlated with Raman and photoluminescence spectroscopy. Our results highlight that h-BN is an effective barrier for short plasma exposures (< 30 secs) but is ineffective for longer exposures, which result in extensive knock-on damage and amorphization in the underlying MoS2.
Hexagonal boron nitride (h-BN) is unique among two-dimensional materials, with a large band gap (~6 eV) and high thermal conductivity (>400 W/m/K), second only to diamond among electrical insulators. Most electronic studies to date have relied on h-B
N exfoliated from bulk crystals; however, for scalable applications the material must be synthesized by methods such as chemical vapor deposition (CVD). Here, we demonstrate single- and few-layer h-BN synthesized by CVD on single crystal platinum and on carbon nanotube (CNT) substrates, also comparing these films with h-BN deposited on the more commonly used polycrystalline Pt and Cu growth substrates. The h-BN film grown on single crystal Pt has a lower surface roughness and is more spatially homogeneous than the film from a polycrystalline Pt foil, and our electrochemical transfer process allows for these expensive foils to be reused with no measurable degradation. In addition, we demonstrate monolayer h-BN as an ultrathin, 3.33 $unicode{x212B}$ barrier protecting MoS2 from damage at high temperatures and discuss other applications that take advantage of the conformal h-BN deposition on various substrates demonstrated in this work.
We report the radio-frequency performance of carbon nanotube array transistors that have been realized through the aligned assembly of highly separated, semiconducting carbon nanotubes on a fully scalable device platform. At a gate length of 100 nm,
we observe output current saturation and obtain as-measured, extrinsic current gain and power gain cut-off frequencies, respectively, of 7 GHz and 15 GHz. While the extrinsic current gain is comparable to the state-of-the-art the extrinsic power gain is improved. The de-embedded, intrinsic current gain and power gain cut-off frequencies of 153 GHz and 30 GHz are the highest values experimentally achieved to date. We analyze the consistency of DC and AC performance parameters and discuss the requirements for future applications of carbon nanotube array transistors in high-frequency electronics.
Vapor sensors based on functionalized carbon nanotubes (NTs) have shown great promise, with high sensitivity conferred by the reduced dimensionality and exceptional electronic properties of the NT. Critical challenges in the development of NT-based s
ensor arrays for chemical detection include the demonstration of reproducible fabrication methods and functionalization schemes that provide high chemical diversity to the resulting sensors. Here, we outline a scalable approach to fabricating arrays of vapor sensors consisting of NT field effect transistors functionalized with single-stranded DNA (DNA-NT). DNA-NT sensors were highly reproducible, with responses that could be described through equilibrium thermodynamics. Target analytes were detected even in large backgrounds of volatile interferents. DNA-NT sensors were able to discriminate between highly similar molecules, including structural isomers and enantiomers. The sensors were also able to detect subtle variations in complex vapors, including mixtures of structural isomers and mixtures of many volatile organic compounds characteristic of humans.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
