اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدRadiation asymmetry and MHD destabilization during the thermal quench after impurity Shattered Pellet Injection
342
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The radiation response and the MHD destabilization during the thermal quench after a mixed species Shattered Pellet Injection (SPI) with impurity species neon and argon are investigated via 3D non-linear MHD simulation using the JOREK code. Both the $n=0$ global current profile contraction and the local helical cooling at each rational surface caused by the pellet fragments are found to be responsible for MHD destabilization after the injection. Significant current driven mode growth is observed as the fragments cross low order rational surfaces, resulting in rapidly inward propagating stochastic magnetic field, ultimately causing the core temperature collapse. The Thermal Quench (TQ) is triggered as the fragments arrive on the $q=1$ or $q=2$ surface depending on the exact $q$ profile and thus mode structure. When injecting from a single toroidal location, strong radiation asymmetry is found before and during the TQ as a result of the unrelaxed impurity density profile along the field line and asymmetric outward heat flux. Such asymmetry gradually relaxes over the course of the TQ, and is entirely eliminated by the end of it. Simulation results indicate that the aforementioned asymmetric radiation behavior could be significantly mitigated by injection from toroidally opposite locations, provided that the time delay between the two injectors is shorter than $1ms$. It is also found that the MHD response are sensitive to the relative timing and injection configuration in these multiple injection cases.
قيم البحث
اقرأ أيضاً
The possibility of using Shattered Pellet Injection(s) after the Thermal Quench phase of an ITER disruption in order to deplete Runaway Electron (RE) seeds before they can substantially avalanche is studied. Analytical and numerical estimates of the
required injection rate for shards to penetrate into the forming RE beam and stop REs are given. How much material could be assimilated before the Current Quench (CQ) becomes too short is also estimated. It appears that, if Hydrogen pellets were used, the required number of pellets to be injected during the CQ would be prohibitive, at least considering the present design of the ITER Disruption Mitigation System (DMS). For Neon or Argon, the required number of pellets, although large, might be within reach of the ITER DMS, but the assimilated fraction would have to be very small. Other materials may be better suited but would require a modification of the ITER DMS.
First simulations of deuterium shattered pellet injection (SPI) into an ASDEX Upgrade H-Mode plasma with the JOREK MHD code are presented. Resistivity is increased by one order of magnitude in most simulations to reduce computational costs and allow
for extensive parameter scans. The effect of various physical parameters onto MHD activity and thermal quench (TQ) dynamics is studied and the influence of MHD onto ablation is shown. TQs are obtained quickly after injection in most simulations with a typical duration of 100 microseconds, which slows down at lower resistivity. Although the n=1 magnetic perturbation dominates in the simulations, toroidal harmonics up to n=10 contribute to stochastization and stochastic transport in the plasma core. The post-TQ density profile remains hollow for a few hundred microseconds. However, when flux surfaces re-form around the magnetic axis, the density has become monotonic again suggesting a beneficial behaviour for runaway electron avoidance/mitigation. With $10^{21}$ atoms injected, the TQ is typically incomplete and triggered when the shards reach the q=2 rational surface. At a larger number of injected atoms, the TQ can set in even before the shards reach this surface. For low field side injection considered here, repeated formation of outward convection cells is observed in the ablation region reducing material assimilation. Responsible is a sudden rise of pressure in the high density cloud when the stochastic region expands further releasing heat from the hot core. After the TQ, strong sheared poloidal rotation is created by Maxwell stress, which contributes to re-formation of flux surfaces.
JOREK 3D non-linear MagnetoHydroDynamic (MHD) simulations of pure Deuterium Shattered Pellet Injection in ITER are presented. It is shown that such a scheme could allow diluting the plasma by more than a factor 10 without immediately triggering large
MHD activity, provided the background impurity density is low enough. This appears as a promising strategy to reduce the risk of hot tail Runaway Electron (RE) generation and to avoid RE beams altogether in ITER, motivating further studies in this direction.
Precise delivery of mass to burning plasmas is a problem of growing interest in magnetic fusion. The answers to how much mass is necessary and sufficient can vary depending on parameters such as the type of atoms involved, the type of applications, p
lasma conditions, mass injector, and injection timing. Motivated by edge localized mode (ELM) control in H-mode plasmas, disruption mitigation and other applications in magnetic fusion, we report progress and new possibilities in mass delivery based on hollow pellets. Here, a hollow pellet refers to a spherical shell mass structure with a hollow core. Based on an empirical model of pellet ablation, coupled with BOUT++ simulations of ELM triggering threshold, hollow pellets are found to be attractive in comparison with solid spheres for ELM control. By using hollow pellets, it is possible to tailor mass delivery to certain regions of edge plasmas while minimizing core contamination and reducing the total amount of mass needed. We also include experimental progress in mass delivery experiments, in-situ diagnostics and hollow pellet fabrication, and emphasize new experimental possibilities for ELM control based on hollow pellets. A related application is the disruption mitigation scheme using powder encapsulated inside hollow shells. Further experiments will also help to resolve known discrepancies between theoretical predictions and experiments in using mass injection for ELM control and lead to better predictive models for ELM stability and triggering.
Pellet ELM triggering is a well established scheme for decreasing the time between two successive ELM crashes below its natural value. Reliable ELM pacing has been demonstrated experimentally in several devices increasing the ELM frequency considerab
ly. However, it was also shown that the frequency cannot be increased arbitrarily due to a so-called lag-time. During this time after a preceding natural or triggered ELM crash, neither a natural ELM crash occurs nor the triggering of an ELM crash by pellet injection is possible. For this article, pellet ELM triggering simulations are advanced beyond previous studies in two ways. Firstly, realistic ExB and diamagnetic background flows are included. And secondly, the pellet is injected at different stages of the pedestal build-up. This allows to recover the lag-time for the first time in simulations and investigate it in detail. A series of non-linear extended MHD simulations is performed to investigate the plasma dynamics resulting from an injection at different time points during the pedestal build-up. The experimentally observed lag-time is qualitatively reproduced well. In particular, a sharp transition is observed between the regime where no ELMs can be triggered and the regime where pellet injection causes an ELM crash. Via variations of pellet parameters and injection time, the two regimes are studied and compared in detail revealing pronounced differences in the non-linear dynamics. The toroidal mode spectrum is significantly broader when an ELM crash is triggered enhancing the stochasticity and therefore also the losses of thermal energy along magnetic field lines. In the heat fluxes to the divertor targets, pronounced toroidal asymmetries are observed. In case of high injection velocities leading to deep penetration, also the excitation of core modes like the $2/1$ neoclassical tearing mode is observed.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
