اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدDesigning the Waveform Bandwidth and Time Duration of Automotive Radars for Better Collision Warning Performance
68
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Automotive radar is a key component in an ADAS. The increasing number of radars implemented in vehicles makes interference between them a noteworthy issue. One method of interference mitigation is to limit the TBP of radar waveforms. However, the problems of how much TBP is necessary and how to optimally utilize the limited TBP have not been addressed. We take CWS as an example and propose a method of designing the radar waveform parameters oriented by the performance of CWS We propose a metric to quantify the CWS performance and study how the radar waveform parameters (bandwidth and duration) influence this metric. Then, the waveform parameters are designed with a limit on the TBP to optimize the system performance. Numerical results show that the proposed design outperforms the state-of-the-art parameter settings in terms of system performance and resource or energy efficiency.
قيم البحث
اقرأ أيضاً
Integrated sensing and communication (ISAC) is a promising technology to fully utilize the precious spectrum and hardware in wireless systems, which has attracted significant attentions recently. This paper studies ISAC for the important and challeng
ing monostatic setup, where one single ISAC node wishes to simultaneously sense a radar target while communicating with a communication receiver. Different from most existing schemes that rely on either radar-centric half-duplex (HD) pulsed transmission with information embedding that suffers from extremely low communication rate, or communication-centric waveform that suffers from degraded sensing performance, we propose a novel full-duplex (FD) ISAC scheme that utilizes the waiting time of conventional pulsed radars to transmit dedicated communication signals. Compared to radar-centric pulsed waveform with information embedding, the proposed design can drastically increase the communication rate, and also mitigate the sensing eclipsing and near-target blind range issues, as long as the self-interference (SI) is effectively suppressed. On the other hand, compared to communication-centric ISAC waveform, the proposed design has better auto-correlation property as it preserves the classic radar waveform for sensing. Performance analysis is developed by taking into account the residual SI, in terms of the probability of detection and ambiguity function for sensing, as well as the spectrum efficiency for communication. Numerical results are provided to show the significant performance gain of our proposed design over benchmark schemes.
In this paper, we describe the evolution of a pair of polyphase coded waveform for use in second trip suppression in weather radar. The polyphase codes were designed and tested on NASA weather radar. The NASA dual-frequency, dual-polarization Doppler
radar (D3R) was developed primarily as a ground validation tool for the GPM satellite dual-frequency radar. Recently, the D3R radar was upgraded with n
In this article, we first provide a brief overview of optical transmission systems and some of their performance specifications. We then present a simple, robust, and bandwidth-efficient OFDM synchronization method, and carry out measurements to vali
date the presented synchronization method with the aid of an experimental setup.
This article develops the multiple-input multiple-output (MIMO) technology for weather radar sensing. There are ample advantages of MIMO that have been highlighted that can improve the spatial resolution of the observations and also the accuracy of t
he radar variables. These concepts have been introduced here pertaining to weather radar observations with supporting simulations demonstrating improvements to existing phased array technology. Already MIMO is being used in a big way for hard target detection and tracking and also in the automotive radar industry and it offers similar improvements for weather radar observations. Some of the benefits are discussed here with a phased array platform in mind which offers quadrant outputs.
In this paper, mm-Pose, a novel approach to detect and track human skeletons in real-time using an mmWave radar, is proposed. To the best of the authors knowledge, this is the first method to detect >15 distinct skeletal joints using mmWave radar ref
lection signals. The proposed method would find several applications in traffic monitoring systems, autonomous vehicles, patient monitoring systems and defense forces to detect and track human skeleton for effective and preventive decision making in real-time. The use of radar makes the system operationally robust to scene lighting and adverse weather conditions. The reflected radar point cloud in range, azimuth and elevation are first resolved and projected in Range-Azimuth and Range-Elevation planes. A novel low-size high-resolution radar-to-image representation is also presented, that overcomes the sparsity in traditional point cloud data and offers significant reduction in the subsequent machine learning architecture. The RGB channels were assigned with the normalized values of range, elevation/azimuth and the power level of the reflection signals for each of the points. A forked CNN architecture was used to predict the real-world position of the skeletal joints in 3-D space, using the radar-to-image representation. The proposed method was tested for a single human scenario for four primary motions, (i) Walking, (ii) Swinging left arm, (iii) Swinging right arm, and (iv) Swinging both arms to validate accurate predictions for motion in range, azimuth and elevation. The detailed methodology, implementation, challenges, and validation results are presented.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
