اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدGate-controlled field emission current from MoS$_2$ nanosheets
90
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Monolayer molybdenum disulfide (MoS$_2$) nanosheets, obtained via chemical vapor deposition onto SiO$_2$/Si substrates, are exploited to fabricate field-effect transistors with n-type conduction, high on/off ratio, steep subthreshold slope and good mobility. The transistor channel conductance increases with the reducing air pressure due to oxygen and water desorption. Local field emission measurements from the edges of the MoS$_2$ nanosheets are performed in high vacuum using a tip-shaped anode. It is demonstrated that the voltage applied to the Si substrate back-gate modulates the field emission current. Such a finding, that we attribute to gate-bias lowering of the MoS$_2$ electron affinity, enables a new field-effect transistor based on field emission.
قيم البحث
اقرأ أيضاً
Non-volatile memory devices have been limited to flash architectures that are complex devices. Here, we present a unique photomemory effect in MoS$_2$ transistors. The photomemory is based on a photodoping effect - a controlled way of manipulating th
e density of free charges in monolayer MoS$_2$ using a combination of laser exposure and gate voltage application. The photodoping promotes changes on the conductance of MoS$_2$ leading to photomemory states with high memory on/off ratio. Such memory states are non-volatile with an expectation of retaining up to 50 % of the information for tens of years. Furthermore, we show that the photodoping is gate-tunable, enabling control of the recorded memory states. Finally, we propose a model to explain the photodoping, and we provide experimental evidence supporting such a phenomenon. In summary, our work includes the MoS$_2$ phototransistors in the non-volatile memory devices and expands the possibilities of memory application beyond conventional memory architectures.
Semiconductors require stable doping for applications in transistors, optoelectronics, and thermoelectrics. However, this has been challenging for two-dimensional (2D) materials, where existing approaches are either incompatible with conventional sem
iconductor processing or introduce time-dependent, hysteretic behavior. Here we show that low temperature (< 200$^circ$ C) sub-stoichiometric AlO$_x$ provides a stable n-doping layer for monolayer MoS$_2$, compatible with circuit integration. This approach achieves carrier densities > 2x10$^{13}$ 1/cm$^2$, sheet resistance as low as ~7 kOhm/sq, and good contact resistance ~480 Ohm.um in transistors from monolayer MoS$_2$ grown by chemical vapor deposition. We also reach record current density of nearly 700 uA/um (>110 MA/cm$^2$) in this three-atom-thick semiconductor while preserving transistor on/off current ratio > $10^6$. The maximum current is ultimately limited by self-heating and could exceed 1 mA/um with better device heat sinking. With their 0.1 nA/um off-current, such doped MoS$_2$ devices approach several low-power transistor metrics required by the international technology roadmap
The advancement of nanoscale electronics has been limited by energy dissipation challenges for over a decade. Such limitations could be particularly severe for two-dimensional (2D) semiconductors integrated with flexible substrates or multi-layered p
rocessors, both being critical thermal bottlenecks. To shed light into fundamental aspects of this problem, here we report the first direct measurement of spatially resolved temperature in functioning 2D monolayer MoS$_2$ transistors. Using Raman thermometry we simultaneously obtain temperature maps of the device channel and its substrate. This differential measurement reveals the thermal boundary conductance (TBC) of the MoS$_2$ interface (14 $pm$ 4 MWm$^-$$^2$K$^-$$^1$) is an order magnitude larger than previously thought, yet near the low end of known solid-solid interfaces. Our study also reveals unexpected insight into non-uniformities of the MoS$_2$ transistors (small bilayer regions), which do not cause significant self-heating, suggesting that such semiconductors are less sensitive to inhomogeneity than expected. These results provide key insights into energy dissipation of 2D semiconductors and pave the way for the future design of energy-efficient 2D electronics.
Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as molybdenum disulfide (MoS2) have been intensively investigated because of their exclusive physical properties for advanced electronics and optoelectronics. In the present work, we s
tudy the MoS2 transistor based on a novel tri-gate device architecture, with dual-gate (Dual-G) in the channel and the buried side-gate (Side-G) for the source/drain regions. All gates can be independently controlled without interference. For a MoS2 sheet with a thickness of 3.6 nm, the Schottky barrier (SB) and non-overlapped channel region can be effectively tuned by electrostatically doping the source/drain regions with Side-G. Thus, the extrinsic resistance can be effectively lowered, and a boost of the ON-state current can be achieved. Meanwhile, the channel control remains efficient under the Dual-G mode, with an ON-OFF current ratio of 3E7 and subthreshold swing of 83 mV/decade. The corresponding band diagram is also discussed to illustrate the device operation mechanism. This novel device structure opens up a new way toward fabrication of high-performance devices based on 2D-TMDs.
In-plane optical anisotropy has been detected from monolayer MoS$_2$ grown on a-plane (11-20) sapphire substrate in the ultraviolet-visible wavelength range. Based on the measured optical anisotropy, the energy differences between the optical transit
ions polarized along the ordinary and extraordinary directions of the underlying sapphire substrate have been determined. The results corroborate comprehensively with the dielectric environment induced modification on the electronic band structure and exciton binding energy of monolayer MoS$_2$ predicted recently by first principle calculations. The output of this study proposes the symmetry as a new degree of freedom for dielectric engineering of the two-dimensional materials.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
