اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOn-Stack Two-Dimensional Conversion of MoS2 into MoO3
81
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Chemical transformation of existing two-dimensional (2D) materials can be crucial in further expanding the 2D crystal palette required to realize various functional heterostructures. In this work, we demonstrate a 2D on-stack chemical conversion of single-layer crystalline MoS2 into MoO3 with a precise layer control that enables truly 2D MoO3 and MoO3/MoS2 heterostructures. To minimize perturbation of the 2D morphology, a nonthermal oxidation using O2 plasma was employed. The early stage of the reaction was characterized by a defect-induced Raman peak, drastic quenching of photoluminescence (PL) signals and sub-nm protrusions in atomic force microscopy images. As the reaction proceeded from the uppermost layer to the buried layers, PL and optical second harmonic generation signals showed characteristic modulations revealing a layer-by-layer conversion. The plasma-generated 2D oxides, confirmed as MoO3 by x-ray photoelectron spectroscopy, were found to be amorphous but extremely flat with a surface roughness of 0.18 nm, comparable to that of 1L MoS2. The rate of oxidation quantified by Raman spectroscopy decreased very rapidly for buried sulfide layers due to protection by the surface 2D oxides, exhibiting a pseudo-self-limiting behavior. As exemplified in this work, various on-stack chemical transformations can be applied to other 2D materials in forming otherwise unobtainable materials and complex heterostructures, thus expanding the palette of 2D material building blocks.
قيم البحث
اقرأ أيضاً
Precise manipulation of electronic band structures of two-dimensional (2D) transition metal dichalcogenides and oxides (TMD&Os) via localised strain engineering is an exciting avenue for exploiting their unique characteristics for electronics, optoel
ectronics, and nanoelectromechanical systems (NEMS) applications. This work experimentally demonstrates that mechanically-induced electrical transitions can be engineered in quasi-2D molybdenum disulphide (MoS2) and molybdenum trioxide (MoO3) using an in situ electrical nanoindentation technique. It is shown that localised strains on such quasi-2D layers can induce carrier transport alterations, thereby changing their electrical conduction behaviour. Such strain effects offer a potential tool for precisely manipulating the electronic transport properties of 2D TMD&Os, and understanding the interactions of the atomic electronic states in such layered materials.
Despite their importance, chemical reactions confined in a low dimensional space are elusive and experimentally intractable. In this work, we report doubly anisotropic, in-plane and out-of-plane, oxidation reactions of two-dimensional crystals, by re
solving interface-confined thermal oxidation of a single and multilayer MoS2 supported on silica substrates from their conventional surface reaction. Using optical second-harmonic generation spectroscopy of artificially stacked multilayers, we directly proved that crystallographically oriented triangular oxides (TOs) were formed in the bottommost layer while triangular etch pits (TEs) were generated in the topmost layer and that both structures were terminated with zigzag edges. The formation of the Mo oxide layer at the interface demonstrates that O2 diffuses efficiently through the van der Waals (vdW) gap but not MoO3, which would otherwise sublime. The fact that TOs are several times larger than TEs indicates that oxidation is greatly enhanced when MoS2 is in direct contact with silica substrates, which suggests a catalytic effect. This study indicates that the vdW-bonded interfaces are essentially open to mass transport and can serve as a model system for investigating chemistry in low dimensional spaces.
Understanding the microscopic mechanism of chemical vapor deposition (CVD) growth of two-dimensional molybdenum disulfide (2D MoS2) is a fundamental issue towards the function-oriented controlled growth. In this work, we report results on revealing t
he growth kinetics of 2D MoS2 via capturing the nucleation seed, evolution morphology, edge structure and terminations at the atomic scale during CVD growth using the transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) studies. The direct growth of few- and mono-layer MoS2 onto graphene based TEM grids allow us to perform the subsequent TEM characterization without any solution-based transfer. Two forms of seeding centers are observed during characterizations: (i) Mo-oxysulfide (MoOxS2-y) nanoparticles either in multi-shelled fullerene-like structures or in compact nanocrystals for the growth of fewer-layer MoS2; (ii) Mo-S atomic clusters in case of monolayer MoS2. In particular, for the monolayer case, at the early stage growth, the morphology appears in irregular polygon shape comprised with two primary edge terminations: S-Mo Klein edge and Mo zigzag edge, approximately in equal numbers, while as the growth proceeds, the morphology further evolves into near-triangle shape in which Mo zigzag edge predominates. Results from density-functional theory calculations are also consistent with the inferred growth kinetics, and thus supportive to the growth mechanism we proposed. In general, the growth mechanisms found here should also be applicable in other 2D materials, such as MoSe2, WS2 and WSe2 etc.
Defects are inevitably present in two-dimensional (2D) materials and usually govern their various properties. Here a comprehensive density functional theory-based investigation of 7 kinds of point defects in a recently produced {gamma} allotrope of 2
D phosphorus carbide ({gamma}-PC) is conducted. The defects, such as antisites, single C or P, and double C and P and C and C vacancies, are found to be stable in {gamma}-PC, while the Stone-Wales defect is not presented in {gamma}-PC due to its transition metal dichalcogenides-like structure. The formation energies, stability, and surface density of the considered defect species as well as their influence on the electronic structure of {gamma}-PC is systematically identified. The formation of point defects in {gamma}-PC is found to be less energetically favourable then in graphene, phosphorene, and MoS2. Meanwhile, defects can significantly modulate the electronic structure of {gamma}-PC by inducing hole/electron doping. The predicted scanning tunneling microscopy images suggest that most of the point defects are easy to distinguish from each other and that they can be easily recognized in experiments.
Structural, interfacial, optical, and transport properties of large-area MoS2 ultra-thin films on BN-buffered silicon substrates fabricated using magnetron sputtering are investigated. A relatively simple growth strategy is demonstrated here that sim
ultaneously promotes superior interfacial and bulk MoS2 properties. Few layers of MoS2 are established using X-ray reflectivity, diffraction, ellipsometry, and Raman spectroscopy measurements. Layer-specific modeling of optical constants shows very good agreement with first-principles calculations. Conductivity measurements reveal that few-layer MoS2 films are more conducting than many-layer films. Photo-conductivity measurements reveal that the sputter deposited MoS2 films compare favorably with other large-area methods. Our work illustrates that sputtering is a viable route for large-area device applications using transition metal dichalcogenides.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
