اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSub-surface H2S detection by a Surface Acoustic Wave passive wireless sensor interrogated with a ground penetrating radar
49
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Long-term monitoring of organic pollutants in the soil is a major environmental challenge. We propose to meet this issue by the development of a polymer dedicated to selectively react with H2S, coating surface acoustic wave transducers designed as passive cooperative targets with the compound, and probing their response using Ground Penetrating RADAR, thus providing the capability to monitor the presence of H2S in the subsurface environment. The selectivity is brought by including lead(II) cation in a reticulated polymer matrix which can be deposited as a thin layer on a surface acoustic wave sensor. We demonstrate a signal enhancement mechanism in which water absorption magnifies the signal detection, making the sensor most sensitive to H2S in an underground environment saturated with moisture.
قيم البحث
اقرأ أيضاً
We propose the design and measurement of an acoustic metasurface retroreflector that works at three discrete incident angles. An impedance model is developed such that for acoustic waves impinging at -60 degrees, the reflected wave is defined by the
surface impedance of the metasurface, which is realized by a periodic grating. At 0 and 60 degrees, the retroreflection condition can be fulfilled by the diffraction of the surface. The thickness of the metasurface is about half of the operating wavelength and the retroreflector functions without parasitic diffraction associated with conventional gradient-index metasurfaces. Such highly efficient and compact retroreflectors open up possibilities in metamaterial-based acoustic sensing and communications.
We have investigated photoconductive properties of single Germanium Nanowires(NWs)of diameter less than 100 nm in the spectral range of 300 to 1100 nm showing ultra large peak Responsivity in excess of 10^{7}AW^{-1}.The NWs were grown by Vapor Liquid
Solid method using Au nanoparticle as catalyst. In this report we discuss the likely origin of the ultra large responsivity that may arise from a combination of various physical effects which are a): Ge and GeO_{x} interface states which act as scavengers of electrons from the photo-generated pairs,leaving the holes free to reach the electrodes,b) Schottky barrier at the metal and NW interface which gets lowered substantially due to carrier diffusion in contact region and (c) photodetector length being small (approximately few {mu}m), negligible loss of photogenerated carriers due to recombination at defect sites. We have observed from power dependence of the optical gain that the gain is controlled by trap states. We find that the surface of the nanowire has presence of a thin layer of GeO_{x} (as evidenced from HRTEM study) which provide interface states. It is observed that these state play a crucial role to provide a radial field for separation of photogenerated electron and hole pair which in turn leads to very high effective photoconductive gain that reaches a very high at low illumination density.
Surface acoustic waveguides are increasing in interest for (bio)chemical detection. The surface mass modification leads to measurable changes in the propagation properties of the waveguide. Among a wide variety of waveguides, Love mode has been inves
tigated because of its high gravimetric sensitivity. The acoustic signal launched and detected in the waveguide by electrical transducers is accompanied by an electromagnetic wave; the interaction of the two signals, easily enhanced by the open structure of the sensor, creates interference patterns in the transfer function of the sensor. The influence of these interferences on the gravimetric sensitivity is presented, whereby the structure of the entire sensor is modelled. We show that electromagnetic interferences generate an error in the experimental value of the sensitivity. This error is different for the open and the closed loop configurations of the sensor. The theoretical approach is completed by the experimentation of an actual Love mode sensor operated under liquid in open loop configuration. The experiment indicates that the interaction depends on the frequency and the mass modifications.
Recently, the concept of valley pseudospin, labeling quantum states of energy extrema in momentum space, has attracted enormous attention because of its potential as a new type of information carrier. Here, we present surface acoustic wave (SAW) wave
guides, which utilize and transport valley pseudospins in two-dimensional SAW phononic crystals (PnCs). In addition to a direct visualization of the valley-dependent states excited from the corresponding chiral sources, the backscattering suppression of SAW valley-dependent edge states transport is observed in sharply curved interfaces. By means of band structure engineering, elastic wave energy in the SAW waveguides can be transported with remarkable robustness, which is very promising for new generations of integrated solid-state phononic circuits with great versatility.
The rising need for hybrid physical platforms has triggered a renewed interest for the development of agile radio-frequency phononic circuits with complex functionalities. The combination of travelling waves with resonant mechanical elements appears
as an appealing means of harnessing elastic vibration. In this work, we demonstrate that this combination can be further enriched by the occurrence of elastic non-linearities induced travelling surface acoustic waves (SAW) interacting with a pair of otherwise linear micron-scale mechanical resonators. Reducing the resonator gap distance and increasing the SAW amplitude results in a frequency softening of the resonator pair response that lies outside the usual picture of geometrical Duffing non-linearities. The dynamics of the SAW excitation scheme allows further control of the resonator motion, notably leading to circular polarization states. These results paves the way towards versatile high-frequency phononic-MEMS/NEMS circuits fitting both classical and quantum technologies.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
