ترغب بنشر مسار تعليمي؟ اضغط هنا

Crystal orientation and grain size: do they determine optoelectronic properties of MAPbI3 perovskite?

87   0   0.0 ( 0 )
 نشر من قبل Loreta Muscarella
 تاريخ النشر 2019
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

It is thought that growing large, oriented grains of perovskite can lead to more efficient devices. We study MAPbI3 films fabricated via Flash Infrared Annealing (FIRA) consisting of highly oriented, large grains. Domains observed in the SEM are often misidentified with crystallographic grains, but SEM images dont provide diffraction information. We measure the grain size, crystal structure and grain orientation using Electron Back-Scattered Diffraction (EBSD) and we study how these affect the optoelectronic properties as characterized by local photoluminescence (PL) and time-resolved microwave conductivity measurements (TRMC). We find a spherulitic growth yielding large (tens of micron), highly oriented grains along the (112) and (400) planes in contrast to randomly oriented, smaller (400 nm) grains observed in films fabricated via conventional antisolvent (AS) dripping. We observe a local enhancement and shift of the photoluminescence emission at different regions of the FIRA clusters, but these can be explained with a combination of light-outcoupling and self-absorption. We observe no effect of crystal orientation on the optoelectronic properties. Additionally, despite a substantial difference in grain size between our FIRA sample and a conventional AS sample, we find similar photoluminescence and charge carrier mobilities and lifetime for the two films. These findings show that the optoelectronic quality is not necessarily related to the orientation and size of crystalline domains in perovskite films indicating that fabrication requirements may be more relaxed for perovskites.



قيم البحث

اقرأ أيضاً

Previous theoretical calculations show azetidinium has the right radial size to form a 3D perovskite with lead halides [1], and has been shown to impart, as the A-site cation of ABX3 unit, beneficial properties to ferroelectric perovskites [2]. Howev er, there has been very limited research into its use as the cation in lead halide perovskites to date. In this communication we report the synthesis and characterization of azetidinium-based lead mixed halide perovskite colloidal nanocrystals. The mixed halide system is iodine and chlorine unlike other reported nanocrystals in the literature where the halide systems are either iodine/bromine or bromine/chlorine. UV-visible absorbance data, complemented with photoluminescence spectroscopy, reveals an indirect-bandgap of about 1.96 eV for our nanocrystals. Structural characterization using TEM shows two distinct interatomic distances (2.98 +/- 0.15 Angstroms and 3.43 +/- 0.16 Angstroms) and non-orthogonal lattice angles (approximately 112 degrees) intrinsic to the nanocrystals with a probable triclinic structure revealed by XRD. The presence of chlorine and iodine within the nanocrystals is confirmed by EDS spectroscopy. Finally, light-induced electron paramagnetic resonance (LEPR) spectroscopy with PCBM confirms the photoinduced charge transfer capabilities of the nanocrystals. The formation of such semiconducting lead mixed halide perovskite using azetidinium as the cation suggests a promising subclass of hybrid perovskites holding potential for optoelectronic applications such as in solar cells and photodetectors.
309 - Lei Guo , Gao Xu , Gang Tang 2020
In recent years, organic-inorganic hybrid perovskites have attracted wide attention due to their excellent optoelectronic properties in the application of optoelectronic devices. In the manufacturing process of perovskite solar cells, perovskite film s inevitably have residual stress caused by non-stoichiometry components and the external load. However, their effects on the structural stability and photovoltaic performance of perovskite solar cells are still not clear. In this work, we investigated the effects of external strain on the structural stability and optoelectronic properties of tetragonal MAPbI3 by using the first-principles calculations. We found that the migration barrier of I- ion increases in the presence of compressive strain and decreases with tensile strain, indicating that the compressive strain can enhance the structural stability of halide perovskites. In addition, the light absorption and electronic properties of MAPbI3 under compressive strain are also improved. The variations of the band gap under triaxial and biaxial strains are consistent within a certain range of strain, resulting from the fact that the band edge positions are mainly influenced by the Pb-I bond in the equatorial plane. Our results provide useful guidance for realizing the commercial applications of MAPbI3-based perovskite solar cells.
Layered materials (LMs) are at the centre of an ever increasing research effort due to their potential use in a variety of applications. The presence of imperfections, such as bi- or multilayer areas, holes, grain boundaries, isotropic and anisotropi c deformations, etc. are detrimental for most (opto)electronic applications. Here, we present a set-up able to transform a conventional scanning electron microscope into a tool for structural analysis of a wide range of LMs. An hybrid pixel electron detector below the sample makes it possible to record two dimensional (2d) diffraction patterns for every probe position on the sample surface (2d), in transmission mode, thus performing a 2d+2d=4d STEM (scanning transmission electron microscopy) analysis. This offers a field of view up to 2 mm2, while providing spatial resolution in the nm range, enabling the collection of statistical data on grain size, relative orientation angle, bilayer stacking, strain, etc. which can be mined through automated open-source data analysis software. We demonstrate this approach by analyzing a variety of LMs, such as mono- and multi-layer graphene, graphene oxide and MoS2, showing the ability of this method to characterize them in the tens of nm to mm scale. This wide field of view range and the resulting statistical information are key for large scale applications of LMs.
Halide perovskites perform remarkably in optoelectronic devices including tandem photovoltaics. However, this exceptional performance is striking given that perovskites exhibit deep charge carrier traps and spatial compositional and structural hetero geneity, all of which should be detrimental to performance. Here, we resolve this long-standing paradox by providing a global visualisation of the nanoscale chemical, structural and optoelectronic landscape in halide perovskite devices, made possible through the development of a new suite of correlative, multimodal microscopy measurements combining quantitative optical spectroscopic techniques and synchrotron nanoprobe measurements. We show that compositional disorder dominates the optoelectronic response, while nanoscale strain variations even of large magnitude (~1 %) have only a weak influence. Nanoscale compositional gradients drive carrier funneling onto local regions associated with low electronic disorder, drawing carrier recombination away from trap clusters associated with electronic disorder and leading to high local photoluminescence quantum efficiency. These measurements reveal a global picture of the competitive nanoscale landscape, which endows enhanced defect tolerance in devices through spatial chemical disorder that outcompetes both electronic and structural disorder.
135 - Jun Wang , Junze Li , Shangui Lan 2018
Two-dimensional (2D) organic-inorganic perovskites have recently attracted increasing attention due to their great environmental stability, remarkable quantum confinement effect and layered characteristic. Heterostructures consisting of 2D layered pe rovskites are expected to exhibit new physical phenomena inaccessible to the single 2D perovskites and can greatly extend their functionalities for novel electronic and optoelectronic applications. Herein, we develop a novel solution method to synthesize 2D perovskite single-crystals with the centimeter size, high phase purity, controllable junction depth, high crystalline quality and great stability for highly narrow dual-band photodetectors. On the basis of the different lattice constant, solubility and growth rate between different n number, the newly designed synthesis method allows to first grow n=1 perovskite guided by the self-assembled layer of the organic cations at the water-air interface and subsequently n=2 layer is formed via diffusion process. Such growth process provides an efficient away for us to readily obtain 2D perovskite heterostructural single-crystals with various thickness and junction depth by controlling the concentration, reaction temperature and time. Photodetectors based on such heterostructural single crystal plates exhibit extremely low dark current, high on-off current ratio, and highly narrow dual-band spectral response with a full-width at half-maximum of 20 nm at 540 nm and 34 nm at 610 nm. In particular, the synthetic strategy is general for other 2D perovskites and the narrow dual-band spectral response with all full-width at half-maximum below 40 nm can be continuously tuned from red to blue by properly changing the halide compositions.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا