اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSecondary cameras onboard the Mini-EUSO experiment: Control Software and Calibration
80
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Mini-EUSO is a space experiment selected to be installed inside the International Space Station. It has a compact telescope with a large field of view ($44 $times$ 44$ sq. deg.) focusing light on an array of photo-multipliers tubes in order to observe UV emission coming from Earths atmosphere. Observations will be complemented with data recorded by some ancillary detectors. In particular, the Mini-EUSO Additional Data Acquisition System (ADS) is composed by two cameras, which will allow us to obtain data in the near infrared, and in the visible range. These will be used to monitor the observation conditions, and to acquire useful information on several scientific topics to be studied with the main instrument, such as the physics of atmosphere, meteors, and strange quark matter. Here we present the ADS control software developed to stream cameras together with the UV main instrument, in order to grab images in an automated and independent way, and we also describe the calibration activities performed on these two ancillary cameras before flight.
قيم البحث
اقرأ أيضاً
We present the data acquisition and control software for the operation of the Mini-Extreme Universe Space Observatory (EUSO), a space-based fluorescence telescope for the observation of extensive air showers and atmospheric phenomena. This framework
has been extensively tested alongside the development of Mini-EUSO and was finalized ahead of the successful launch of the instrument to the ISS on August 22, 2019. The data acquisition, housekeeping, and subsystem control are achieved using custom-designed front-end electronics based on a Xilinx Zynq XC7Z030 chip interfaced with a PCIe/104 CPU module via the integrated Zynq processing system. The instrument control interface is handled using an object-oriented C++ design, which can be run both autonomously and interactively as required. Although developed for Mini-EUSO, the modular design of both the software and hardware can easily be scaled up to larger instrument designs and adapted to different subsystem and communication requirements. As such, this framework will also be used in the upgrade of the EUSO-TA instrument and potentially for the next EUSO-SPB2 NASA Balloon flight. The software and firmware presented are open source and released with detailed and integrated documentation.
Mini-EUSO will observe the Earth in the UV range (300 - 400 nm) offering the opportunity to study a variety of atmospheric events such as Transient Luminous Events (TLEs), meteors and marine bioluminescence. Furthermore it aims to search for Ultra Hi
gh Energy Cosmic Rays (UHECR) above $10^{21}$ eV and Strange Quark Matter (SQM). The detector is expected to be launched to the International Space Station in August 2019 and look at the Earth in nadir mode from the UV-transparent window of the Zvezda module of the International Space Station. The instrument comprises a compact telescope with a large field of view ($44^{circ}$), based on an optical system employing two Fresnel lenses for light collection. The light is focused onto an array of 36 multi-anode photomultiplier tubes (MAPMT), for a total of 2304 pixels and the resulting signal is converted into digital, processed and stored via the electronics subsystems on-board. In addition to the main detector, Mini-EUSO contains two ancillary cameras for complementary measurements in the near infrared (1500 - 1600 nm) and visible (400 - 780 nm) range and also a 8x8 SiPM imaging array.
The TurLab facility is a laboratory, equipped with a 5 m diameter and 1 m depth rotating tank, located in the Physics Department of the University of Turin. Originally, it was mainly built to study systems of different scales where rotation plays a k
ey role in the fluid behavior such as in atmospheric and oceanic flows. In the past few years the TurLab facility has been used to perform experiments related to the observation of Extreme Energy Cosmic Rays (EECRs) from space using the fluorescence technique. For example, in the case of the JEM-EUSO mission, where the diffuse night brightness and artificial light sources can vary significantly in time and space inside the Field of View of the telescope. The Focal Surface of Mini-EUSO Engineering Model (Mini-EUSO EM) with the level 1 (L1) and 2 (L2) trigger logics implemented in the Photo-Detector Module (PDM) has been tested at TurLab. Tests related to the possibility of using an EUSO-like detector for other type of applications such as Space Debris (SD) monitoring and imaging detector have also been pursued. The tests and results obtained within the EUSO@TurLab Project on these different topics are presented.
Mini-EUSO (Extreme Universe Space Observatory) is a small-scale prototype cosmic-ray detector that will measure Earth`s UV emission and other atmospheric phenomena from space. It will be placed in the International Space Station (ISS) behind a UV-tra
nsparent window looking to the nadir. The launch is planned this year (2019). Consisting of a multi-anode photomultiplier (MAPMT) camera and a $25$ cm diameter Fresnel lens system, Mini-EUSO has a ang{44} field of view (FoV), a $6.5$ km$^2$ spatial resolution on the ground and a $2.5 mu$s temporal resolution. In principle, Mini-EUSO will be sensitive to extensive air shower (EAS) from cosmic-rays with energies above $10^{21}$ eV. A mobile, steerable UV laser system will be used to test the expected energy threshold and performance of Mini-EUSO. The laser system will be driven to remote locations in the Western US and aimed across the field of view of Mini-EUSO when the ISS passes overhead during dark nights. It will emit pulsed $355$ nm UV laser light to produce a short speed-of-light track in the detector. The brightness of this track will be similar to the track from an EAS resulting from a cosmic-ray of up to $10^{21}$ eV. The laser energy is selectable with a maximum of around $90$ mJ per pulse. The energy calibration factor is stable within $5 % $. The characteristics of the laser system and Mini-EUSO have been implemented inside the JEM-EUSO OffLine software framework, and laser simulation studies are ongoing to determine the best way to perform a field measurement.
The E and B Experiment (EBEX) was a long-duration balloon-borne instrument designed to measure the polarization of the cosmic microwave background (CMB) radiation. EBEX was the first balloon-borne instrument to implement a kilo-pixel array of transit
ion edge sensor (TES) bolometric detectors and the first CMB experiment to use the digital version of the frequency domain multiplexing system for readout of the TES array. The scan strategy relied on 40 s peak-to-peak constant velocity azimuthal scans. We discuss the unique demands on the design and operation of the payload that resulted from these new technologies and the scan strategy. We describe the solutions implemented including the development of a power system designed to provide a total of at least 2.3 kW, a cooling system to dissipate 590 W consumed by the detectors readout system, software to manage and handle the data of the kilo-pixel array, and specialized attitude reconstruction software. We present flight performance data showing faultless management of the TES array, adequate powering and cooling of the readout electronics, and constraint of attitude reconstruction errors such that the spurious B-modes they induced were less than 10% of CMB B-mode power spectrum with $r=0.05$.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
