ترغب بنشر مسار تعليمي؟ اضغط هنا

Tomographic Reconstruction of Triaxial Strain Fields from Bragg-Edge Neutron Imaging

72   0   0.0 ( 0 )
 نشر من قبل Johannes Hendriks
 تاريخ النشر 2019
والبحث باللغة English




اسأل ChatGPT حول البحث

This paper presents a proof-of-concept demonstration of triaxial strain tomography from Bragg-edge neutron imaging within a three-dimensional sample. Bragg-edge neutron transmission can provide high-resolution images of the average through thickness strain within a polycrystalline material. This poses an associated rich tomography problem which seeks to reconstruct the full triaxial strain field from these images. The presented demonstration is an important step towards solving this problem, and towards a technique capable of studying the residual strain and stress within engineering components. A Gaussian process based approach is used that ensures the reconstruction satisfies equilibrium and known boundary conditions. This approach is demonstrated experimentally on a non-trivial steel sample with use of the RADEN instrument at the Japan Proton Accelerator Research Complex. Validation of the reconstruction is provided by comparison with conventional strain scans from the KOWARI constant-wavelength strain diffractometer at the Australian Nuclear Science and Technology Organisation and simulations via finite element analysis.



قيم البحث

اقرأ أيضاً

Energy resolved neutron transmission techniques can provide high-resolution images of strain within polycrystalline samples allowing the study of residual strain and stress in engineered components. Strain is estimated from such data by analysing fea tures known as Bragg-edges for which several methods exist. It is important for these methods to provide both accurate estimates of strain and an accurate quantification the associated uncertainty. Our contribution is twofold. First, we present a numerical simulation analysis of these existing methods, which shows that the most accurate estimates of strain are provided by a method that provides inaccurate estimates of certainty. Second, a novel Bayesian non-parametric method for estimating strain from Bragg-edges is presented. The numerical simulation analysis indicates that this method provides both competitive estimates of strain and accurate quantification of certainty, two demonstrations on experimental data are then presented.
Several recent methods for tomographic reconstruction of stress and strain fields from Bragg-edge neutron strain images have been proposed in the literature. This paper presents an extension of a previously demonstrated approach based on Gaussian Pro cess regression which enforces equilibrium in the method. This extension incorporates knowledge of boundary conditions, primarily boundary tractions, into the reconstruction process. This is shown to increase the rate of convergence and is more tolerant of systematic errors that may be present in experimental measurements. An exact expression for a central calculation in this method is also provided which avoids the need for the approximation scheme that was previously used. Convergence of this method for simulated data is compared to existing approaches and a reconstruction from experimental data is provided. Validation of the results to conventional constant wavelength strain measurements and comparison to prior methods shows a significant improvement.
Plasma tomography consists in reconstructing the 2D radiation profile in a poloidal cross-section of a fusion device, based on line-integrated measurements along several lines of sight. The reconstruction process is computationally intensive and, in practice, only a few reconstructions are usually computed per pulse. In this work, we trained a deep neural network based on a large collection of sample tomograms that have been produced at JET over several years. Once trained, the network is able to reproduce those results with high accuracy. More importantly, it can compute all the tomographic reconstructions for a given pulse in just a few seconds. This makes it possible to visualize several phenomena -- such as plasma heating, disruptions and impurity transport -- over the course of a discharge.
Here we introduce a new reconstruction technique for two-dimensional Bragg Scattering Tomography (BST), based on the Radon transform models of [arXiv preprint, arXiv:2004.10961 (2020)]. Our method uses a combination of ideas from multibang control an d microlocal analysis to construct an objective function which can regularize the BST artifacts; specifically the boundary artifacts due to sharp cutoff in sinogram space (as observed in [arXiv preprint, arXiv:2007.00208 (2020)]), and artifacts arising from approximations made in constructing the model used for inversion. We then test our algorithm in a variety of Monte Carlo (MC) simulated examples of practical interest in airport baggage screening and threat detection. The data used in our studies is generated with a novel Monte-Carlo code presented here. The model, which is available from the authors upon request, captures both the Bragg scatter effects described by BST as well as beam attenuation and Compton scatter.
Nanoscale heterogeneity (including size, shape, strain, and defects) significantly impacts material properties and how they function. Bragg coherent x-ray imaging methods have emerged as a powerful tool to investigate, in three-dimensional detail, th e local material response to external stimuli in reactive environments, thereby enabling explorations of the structure-defect-function relationship at the nanoscale. Although progress has been made in understanding this relationship, coherent imaging of extended samples is relatively slow (typically requiring many minutes) due to the experimental constraints required to solve the phase problem. Here, we develop Bragg coherent modulation imaging (BCMI), which uses a modulator to solve the phase problem thereby enabling fast, local imaging of an extended sample. Because a known modulator is essential to the technique, we first demonstrate experimentally that an unknown modulator structure can be recovered by using the exit wave diversity that exists in a standard Bragg coherent diffraction imaging (BCDI) experiment. We then show with simulations that a known modulator constraint is sufficient to solve the phase problem and enable a single view of an extended sample that is sensitive to defects and dislocations. Our results pave the way for BCMI investigations of strain and defect dynamics in complex extended crystals with temporal resolution limited by the exposure time of a single diffraction pattern.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا