اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSpatial Beam Tracking and Data Detection for an FSO Link to a UAV in the Presence of Hovering Fluctuations
98
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Recent advances in small-scale unmanned aerial vehicles (UAVs) have opened up new horizons for establishing UAV-based free-space optical (FSO) links. However, FSO technology requires precise beam alignment while random fluctuations of hovering UAVs can induce beam misalignment and angle-of-arrival (AoA) fluctuations. For an FSO link to a UAV, we consider a quadrant detector array for optical beam tracking and study the effect of random hovering fluctuations of the UAV on the performance of the tracking method, and based on the degree of instabilities for the UAV, the optimum size of the detectors for minimizing the tracking error is found. Furthermore, for optimal detection of On - Off keying symbols, the receiver requires instantaneous channel fading coefficients. We propose a blind method to estimate the channel coefficients, i.e., without using any pilot symbols, to increase link bandwidth efficiency. To evaluate the performance of the considered system, closed-form expressions of tracking error and bit-error rate are derived. Moreover, Monte-Carlo simulation is carried out to corroborate the accuracy of the derived analytical expressions.
قيم البحث
اقرأ أيضاً
The integration of unmanned aerial vehicles (UAVs) and millimeter wave (mmWave) wireless systems has been recently proposed to provide high data rate aerial links for next generation wireless networks. However, establishing UAV-based mmWave links is
quite challenging due to the random fluctuations of hovering UAVs which can induce antenna gain mismatch between transmitter and receiver. To assess the benefit of UAV-based mmWave links, in this paper, tractable, closed-form statistical channel models are derived for three UAV communication scenarios: (i) a direct UAV-to-UAV link, (ii) an aerial relay link in which source, relay, and destination are hovering UAVs, and (iii) a relay link in which a hovering UAV connects a ground source to a ground destination. The accuracy of the derived analytical expressions is corroborated by performing Monte-Carlo simulations. Numerical results are then used to study the effect of antenna directivity gain under different channel conditions for establishing reliable UAV-based mmWave links in terms of achieving minimum outage probability. It is shown that the performance of such links is largely dependent on the random fluctuations of hovering UAVs. Moreover, higher antenna directivity gains achieve better performance at low SNR regime. Nevertheless, at the high SNR regime, lower antenna directivity gains result in a more reliable communication link. The developed results can therefore be applied as a benchmark for finding the optimal antenna directivity gain of UAVs under the different levels of instability without resorting to time-consuming simulations.
A ground-to-air free-space optical link is studied for a hovering unmanned aerial vehicle (UAV) having multiple rotors. For this UAV, a four-quadrant array of photodetectors is used at the optical receiver to alleviate the adverse effect of hovering
fluctuations by enlarging the receiver field-of-view. Extensive mathematical analysis is conducted to evaluate the beam tracking performance under the random effects of hovering fluctuations. The accuracy of the derived analytical expressions is corroborated by performing Monte-Carlo simulations. It is shown that the performance of such links depends heavily on the random fluctuations of hovering UAV, and, for each level of instability there is an optimal size for the array that minimizes the tracking error probability
Relay-assisted free-space optical (FSO) communication systems are exploited as a means to mitigate the limiting effects of the turbulence induced atmospheric scintillation. However, conventional ground relays are stationary, and their optimal placeme
nt is not always feasible. Due to their mobility and flexibility, unmanned aerial vehicles (UAVs) provide new opportunities for FSO relaying systems. In this paper, a hovering UAV-based serial FSO decode-and-forward relaying system is investigated. In the channel modelling for such a system, four types of impairments (i.e., atmospheric loss, atmospheric turbulence, pointing error, and link interruption due to angle-of-arrival fluctuation) are considered. Based on the proposed channel model, a tractable expression for the probability density function of the total channel gain is obtained. Closed-form expressions of the link outage probability and end-to-end outage probability are derived. Asymptotic outage performance bounds for each link and the overall system are also presented to reveal insights into the impacts of different impairments. To improve system performance, we optimize the beam width, field-of-view and UAVs locations. Numerical results show that the derived theoretical expressions are accurate to evaluate the outage performance of the system. Moreover, the proposed optimization schemes are efficient and can improve performance significantly.
UAV communications based on an antenna array entail a beam tracking technology for reliable link acquisition. Unlike conventional cellular communication, beam tracking in UAV communication addresses new issues such as mobility and abrupt channel disc
onnection from UAVs perturbation. To deal with these issues, we propose a beam tracking scheme based on extended Kalman filter (EKF) using a monopulse signal, which can provide (1) higher robustness by offering a reliable link in the estimated spatial direction and (2) lower complexity compared with the existing conventional beam tracking schemes. We point out the limitations of using a beamformed signal as a measurement model for a Kalman filter (KF) based scheme and instead utilize the monopulse signal as a more plausible model. For the performance evaluation, we derive the upper bound of the mean square error for spatial angle estimation of UAV and confirm that the proposed scheme is stable with a certain bounded error. We also show from various simulations that the proposed scheme can efficiently track UAV and detect beam disconnection every time frame using a beamformed signal.
Deployment of unmanned aerial vehicles (UAVs) is recently getting significant attention due to a variety of practical use cases, such as surveillance, data gathering, and commodity delivery. Since UAVs are powered by batteries, energy efficient commu
nication is of paramount importance. In this paper, we investigate the problem of lifetime maximization of a UAV-assisted network in the presence of multiple sources of interference, where the UAVs are deployed to collect data from a set of wireless sensors. We demonstrate that the placement of the UAVs play a key role in prolonging the lifetime of the network since the required transmission powers of the UAVs are closely related to their locations in space. In the proposed scenario, the UAVs transmit the gathered data to a primary UAV called textit{leader}, which is in charge of forwarding the data to the base station (BS) via a backhaul UAV network. We deploy tools from spectral graph theory to tackle the problem due to its high non-convexity. Simulation results demonstrate that our proposed method can significantly improve the lifetime of the UAV network.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
