ترغب بنشر مسار تعليمي؟ اضغط هنا

Statistical Location and Rotation-Aware Beam Search for Millimeter-Wave Networks

64   0   0.0 ( 0 )
 نشر من قبل Domenico Giustiniano
 تاريخ النشر 2018
  مجال البحث الهندسة المعلوماتية
والبحث باللغة English




اسأل ChatGPT حول البحث

Beam training in dynamic millimeter-wave (mm-wave) networks with mobile devices is highly challenging as devices must scan a large angular domain to maintain alignment of their directional antennas under mobility. Device rotation is particularly challenging, as a handheld device may rotate significantly over a very short period of time, causing it to lose the connection to the Access Point (AP) unless the rotation is accompanied by immediate beam realignment. We study how to maintain the link to a mm-wave AP under rotation and without any input from inertial sensors, exploiting the fact that mm-wave devices will typically be multi-band. We present a model that maps Time-of-Flight measurements to rotation and propose a method to infer the rotation speed of the mobile terminal using only measurements from sub-6 GHz WiFi. We also use the same sub-6 GHz WiFi system to reduce the angle error estimate for link establishment, exploiting the spatial geometry of the deployed APs and a statistical model that maps the user positions spatial distribution to an angle error distribution. We leverage these findings to introduce SLASH, a Statistical Location and rotation-Aware beam SearcH algorithm that adaptively narrows the sector search space and accelerates both link establishment and maintenance between mm-wave devices. We evaluate SLASH with experiments conducted indoors with a sub-6 GHz WiFi Time-of-Flight positioning system and a 60-GHz testbed. SLASH can increase the data rate by more than 41% for link establishment and 67% for link maintenance with respect to prior work.

قيم البحث

اقرأ أيضاً

107 - Qing Xue , Xuming Fang , Ming Xiao 2017
Millimeter wave (mmWave) communication has attracted increasing attention as a promising technology for 5G networks. One of the key architectural features of mmWave is the use of massive antenna arrays at both the transmitter and the receiver sides. Therefore, by employing directional beamforming (BF), both mmWave base stations (MBSs) and mmWave users (MUEs) are capable of supporting multi-beam simultaneous transmissions. However, most researches have only considered a single beam, which means that they do not make full potential of mmWave. In this context, in order to improve the performance of short-range indoor mmWave networks with multiple reflections, we investigate the challenges and potential solutions of downlink multi-user multi-beam transmission, which can be described as a high-dimensional (i.e., beamspace) multi-user multiple-input multiple-output (MU-MIMO) technique, including multi-user BF training, simultaneous users grouping, and multi-user multibeam power allocation. Furthermore, we present the theoretical and numerical results to demonstrate that beamspace MU-MIMO compared with single beam transmission can largely improve the rate performance of mmWave systems.
Signal occlusion by building blockages is a double-edged sword for the performance of millimeter-wave (mmW) communication networks. Buildings may dominantly attenuate the useful signals, especially when mmW base stations (BSs) are sparsely deployed c ompared to the building density. In the opposite BS deployment, buildings can block the undesired interference. To enjoy only the benefit, we propose a building-aware association scheme that adjusts the directional BS association bias of the user equipments (UEs), based on a given building density and the concentration of UE locations around the buildings. The association of each BS can thereby be biased: (i) toward the UEs located against buildings for avoiding interference to other UEs; or (ii) toward the UEs providing their maximum reference signal received powers (RSRPs). The proposed association scheme is optimized to maximize the downlink average data rate derived by stochastic geometry. Its effectiveness is validated by simulation using real building statistics.
We introduce fast millimeter-wave base station (BS) and its antenna sector selection for user equipment based on its location. Using a conditional random field inference model with specially designed parameters, which are robust to change of environm ent, InferBeam allows the use of measurement samples on best beam selection at a small number of locations to infer the rest dynamically. Compared to beam-sweeping based approaches in the literature, InferBeam can drastically reduce the setup cost for beam alignment for a new environment, and also the latency in acquiring a new beam under intermittent blockage. We have evaluated InferBeam using a discrete event simulation. Our results indicate that the system can make best beam selection for 98% of locations in test environments comprising smallsized apartment or office spaces, while sampling fewer than 1% of locations. InferBeam is a complete protocol for best beam inference that can be integrated into millimeter-wave standards for accelerating the much-needed fast and economic beam alignment capability.
235 - Chunshan Liu , Min Li , Lou Zhao 2020
Millimeter Wave (mmWave) communications rely on highly directional beams to combat severe propagation loss. In this paper, an adaptive beam search algorithm based on spatial scanning, called Iterative Deactivation and Beam Shifting (IDBS), is propose d for mmWave beam alignment. IDBS does not require advance information such as the Signal-to-Noise Ratio (SNR) and channel statistics, and matches the training overhead to the unknown SNR to achieve satisfactory performance. The algorithm works by gradually deactivating beams using a Bayesian probability criterion based on a uniform improper prior, where beam deactivation can be implemented with low-complexity operations that require computing a low-degree polynomial or a search through a look-up table. Numerical results confirm that IDBS adapts to different propagation scenarios such as line-of-sight and non-line-of-sight and to different SNRs. It can achieve better tradeoffs between training overhead and beam alignment accuracy than existing non-adaptive algorithms that have fixed training overheads.
Internet of Things is one of the most promising technology of the fifth-generation (5G) mobile broadband systems. Data-driven wireless services of 5G systems require unprecedented capacity and availability. The millimeter-wave based wireless communic ation technologies are expected to play an essential role in future 5G systems. In this article, we describe the three broad categories of fifth-generation services, viz., enhanced mobile broadband, ultra-reliable and low-latency communications, and massive machine-type communications. Furthermore, we introduce the potential issues of consumer devices under a unifying 5G framework. We provide the state-of-the-art overview with an emphasis on technical challenges when applying millimeter-wave (mmWave) technology to support the massive Internet of Things applications. Our discussion highlights the challenges and solutions, particularly for communication/computation requirements in consumer devices under the millimeter-wave 5G framework.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا