اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدX-ray reflectivity with a twist: quantitative time-resolved X-ray reflectivity using monochromatic synchrotron radiation
50
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We have developed an improved method of time-resolved x-ray reflectivity (XRR) using monochromatic synchrotron radiation. Our method utilizes a polycapillary x-ray optic to create a range of incident angles and an area detector to collect the specular reflections. By rotating the sample normal out of the plane of the incident fan, we can separate the surface diffuse scatter from the reflectivity signal, greatly improving the quality of the XRR spectra compared to previous implementations. We demonstrate the time-resolved capabilities of this system, with temporal resolution as low as 10 ms, by measuring XRR during the annealing of Al/Ni nano-scale multilayers and use this information to extract the activation energy for interdiffusion in this system.
قيم البحث
اقرأ أيضاً
We report on the lattice evolution of BiFeO3 as function of temperature using far infrared emissivity, reflectivity, and X-ray absorption local structure. A power law fit to the lowest frequency soft phonon in the magnetic ordered phase yields an exp
onent {beta}=0.25 as for a tricritical point. At about 200 K below TN~640 K it ceases softening as consequence of BiFeO3 metastability. We identified this temperature as corresponding to a crossover transition to an order-disorder regime. Above ~700 K strong band overlapping, merging, and smearing of modes are consequence of thermal fluctuations and chemical disorder. Vibrational modes show band splits in the ferroelectric phase as emerging from triple degenerated species as from a paraelectric cubic phase above TC~1090 K. Temperature dependent X-ray absorption near edge structure (XANES) at the Fe K-edge shows that lower temperature Fe3+ turns into Fe2+. While this matches the FeO wustite XANES profile, the Bi LIII-edge downshift suggests a high temperature very complex bond configuration at the distorted A perovskite site. Overall, our local structural measurements reveal high temperature defect-induced irreversible lattice changes, below, and above the ferroelectric transition, in an environment lacking of long-range coherence. We did not find an insulator to metal transition prior to melting.
We study the growth of the Fe films on GaAs(100) at a low temperature, 140 K, by $in$-$situ$ UHV x-ray reflectivity using synchrotron radiation. We find rough surface with the growth exponent, $beta_S$ = 0.51$pm$0.04. This indicates that the growth o
f the Fe film proceeds via the restrictive relaxation due to insufficient thermal diffusion of the adatoms. The XRR curves are nicely fit by a model with a uniform Fe film, implying that the surface segregation and interface alloying of both Ga and As are negligible. When the Fe film is annealed to 300 K, however, the corresponding XRR can be fit only after including an additional layer of 9 A thickness between the Fe film and the substrate, indicating the formation of ultrathin alloy near the interface. The confinement of the alloy near the interface derives from the fact that the diffusion of Ga and As from the substrate should proceed via the inefficient bulk diffusion, and hence the overlying Fe film is kinetically stabilized.
We present x-ray resonant magnetic reflectivity (XRMR) as a very sensitive tool to detect proximity induced interface spin polarization in Pt/Fe, Pt/Ni$_{33}$Fe$_{67}$, Pt/Ni$_{81}$Fe$_{19}$ (permalloy), and Pt/Ni bilayers. We demonstrate that a deta
iled analysis of the reflected x-ray intensity gives insight in the spatial distribution of the spin polarization of a non-magnetic metal across the interface to a ferromagnetic layer. The evaluation of the experimental results with simulations based on optical data from ab initio calculations provides the induced magnetic moment per Pt atom in the spin polarized volume adjacent to the ferromagnet. We find the largest spin polarization in Pt/Fe and a much smaller magnetic proximity effect in Pt/Ni. Additional XRMR experiments with varying photon energy are in good agreement with the theoretical predictions for the energy dependence of the magnetooptic parameters and allow identifying the optical dispersion $delta$ and absorption $beta$ across the Pt L3-absorption edge.
We report the design and construction of a novel soft x-ray diffractometer installed at Diamond Light Source. The beamline endstation RASOR is constructed for general users and designed primarily for the study of single crystal diffraction and thin f
ilm reflectivity. The instrument is comprised of a limited three circle ({theta}, 2{theta}, {chi}) diffractometer with an additional removable rotation ({phi}) stage. It is equipped with a liquid helium cryostat, and post-scatter polarization analysis. Motorised motions are provided for the precise positioning of the sample onto the diffractometer centre of rotation, and for positioning the centre of rotation onto the x-ray beam. The functions of the instrument have been tested at Diamond Light Source, and initial test measurements are provided, demonstrating the potential of the instrument.
The theoretical formulation of x-ray resonant magnetic scattering from rough surfaces and interfaces is given for specular reflectivity. A general expression is derived for both structurally and magnetically rough interfaces in the distorted-wave Bor
n approximation (DWBA) as the framework of the theory. For this purpose, we have defined a ``structural and a ``magnetic interface to represent the actual interfaces. A generalization of the well-known Nevot-Croce formula for specular reflectivity is obtained for the case of a single rough magnetic interface using the self-consistent method. Finally, the results are generalized to the case of multiple interfaces, as in the case of thin films or multilayers. Theoretical calculations for each of the cases are illustrated with numerical examples and compared with experimental results of magnetic reflectivity from a Gd/Fe multilayer.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
