ترغب بنشر مسار تعليمي؟ اضغط هنا

Coupling of RF Antennas to Large Volume Helicon Plasma

83   0   0.0 ( 0 )
 نشر من قبل Lei Chang
 تاريخ النشر 2018
  مجال البحث فيزياء
والبحث باللغة English




اسأل ChatGPT حول البحث

Large volume helicon plasma sources are of particular interest for large scale semiconductor processing, high power plasma propulsion and recently plasma-material interaction under fusion conditions. This work is devoted to studying the coupling of four typical RF antennas to helicon plasma with infinite length and diameter of $0.5$~m, and exploring its frequency dependence in the range of $13.56-70$~MHz for coupling optimization. It is found that loop antenna is more efficient than half helix, Boswell and Nagoya III antennas for power absorption; radially parabolic density profile overwhelms Gaussian density profile in terms of antenna coupling for low-density plasma, but the superiority reverses for high-density plasma. Increasing the driving frequency results in power absorption more near plasma edge, but the overall power absorption increases with frequency. Perpendicular stream plots of wave magnetic field, wave electric field and perturbed current are also presented. This work can serve as an important reference for the experimental design of large volume helicon plasma source with high RF power.



قيم البحث

اقرأ أيضاً

Radio Frequency (RF) driven helicon plasma sources are commonly used for their ability to produce high-density argon plasmas (n > 10^19/m^3) at relatively moderate powers (typical RF power < 2 kW). Typical electron temperatures are < 10 eV and typica l ion temperatures are < 0.6 eV. A newly designed helicon antenna assembly (with concentric, double-layered, fully liquid-cooled RF-transparent windows) operates in steady-state at RF powers up to 10 kW. We report on the dependence of argon plasma density, electron temperature and ion temperature on RF power. At 10 kW, ion temperatures > 2 eV in argon plasmas are measured with laser induced fluorescence, which is consistent with a simple volume averaged 0-D power balance model. 1-D Monte Carlo simulations of the neutral density profile for these plasma conditions show strong neutral depletion near the core and predict neutral temperatures well above room temperatures. The plasmas created in this high-power helicon source (when light ions are employed) are ideally suited for fusion divertor plasma-material interaction studies and negative ion production for neutral beams.
60 - L. Chang , J. Liu , X. G. Yuan 2020
The definition of magnetic shuttle is introduced to describe the magnetic space enclosed by two tandem magnetic mirrors with the same field direction and high mirror ratio. Helicon plasma immersed in such a magnetic shuttle which can provide the conf inement of charged particles is modeled using an electromagnetic solver. The perpendicular structure of wave field along this shuttle is given in terms of stream vector plots, showing significant change from midplane to ending throats, and the vector field rotates and forms a circular layer that separating plasma column radially into core and edge regions near the throats. The influences of driving frequency, plasma density and field strength on the wave field and power absorption are computed in detail. It is found that the wave magnitude and power absorption decrease for increased driving frequency and reduced field strength, and maximize around a certain level of plasma density. The axial standing-wave feature always exists, due to the interference between forward and reflected waves from ending magnetic mirrors, while the radial wave field structure largely stays the same. Distributions of wave energy density and power absorption density all show shrinking feature from midplane to ending throats, which is consistent with the nature of helicon mode that propagating along field lines. Theoretical analysis based on a simple magnetic shuttle and the governing equation of helicon waves shows consistency with computed results and previous studies.
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing E lectric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planet with atmosphere, enabling new mission at low altitude ranges for longer times. Challenging is also the presence of reactive chemical species, such as atomic oxygen in Earth orbit. Such species cause erosion of (not only) propulsion system components, i.e. acceleration grids, electrodes, and discharge channels of conventional EP systems. IRS is developing within the DISCOVERER project, an intake and a thruster for an ABEP system. The paper describes the design and implementation of the RF helicon-based inductive plasma thruster (IPT). This paper deals in particular with the design and implementation of a novel antenna called the birdcage antenna, a device well known in magnetic resonance imaging (MRI), and also lately employed for helicon-wave based plasma sources in fusion research. The IPT is based on RF electrodeless operation aided by an externally applied static magnetic field. The IPT is composed by an antenna, a discharge channel, a movable injector, and a solenoid. By changing the operational parameters along with the novel antenna design, the aim is to minimize losses in the RF circuit, and accelerate a quasi-neutral plasma plume. This is also to be aided by the formation of helicon waves within the plasma that are to improve the overall efficiency and achieve higher exhaust velocities. Finally, the designed IPT with a particular focus on the birdcage antenna design procedure is presented
Measurement of radial density profile in both the source and expansion chambers of a helicon plasma device have revealed that it is always centrally peaked in the source chamber, whereas in the expansion chamber near the diverging magnetic field it b ecomes hollow above a critical value of the magnetic field. This value corresponds to that above which both electrons and ions become magnetized. The temperature profile is always peaked off- axis and tail electrons are found at the peak location in both the source and expansion chambers. Rotation of the tail electrons in the azimuthal direction in the expansion chamber due to gradient-B drift produces more ionization off-axis and creates a hollow density profile; however, if the ions are not magnetized, the additional ionization does not cause hollowness.
The ionization efficiency of helicon plasma discharge is explored by changing the low axial magnetic field gradients near the helicon antenna. The highest plasma density is found for a most possible diverging field near the antenna by keeping the oth er operating condition constant. Measurement of axial wave number together with estimated radial wavenumber suggests the oblique mode propagation of helicon wave along the resonance cone boundary. Propagation of helicon wave near the resonance cone angle boundary can excite electrostatic fluctuations which subsequently can deposit energy in the plasma. This process has been shown to be responsible for peaking in density in low field helicon discharges, where the helicon wave propagates at an angle with respect to the applied uniform magnetic field. The increased efficiency can be explained on the basis of multiple resonances for multimode excitation by the helicon antenna due to the availability of a broad range of magnetic field values in the near field of the antenna when a diverging magnetic field is applied in the source.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا