اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSurvey and Performance Evaluation of the Upcoming Next Generation WLAN Standard - IEEE 802.11ax
77
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
With the ever-increasing demand for wireless traffic and quality of serives (QoS), wireless local area networks (WLANs) have developed into one of the most dominant wireless networks that fully influence human life. As the most widely used WLANs standard, Institute of Electrical and Electronics Engineers (IEEE) 802.11 will release the upcoming next generation WLANs standard amendment: IEEE 802.11ax. This article comprehensively surveys and analyzes the application scenarios, technical requirements, standardization process, key technologies, and performance evaluations of IEEE 802.11ax. Starting from the technical objectives and requirements of IEEE 802.11ax, this article pays special attention to high-dense deployment scenarios. After that, the key technologies of IEEE 802.11ax, including the physical layer (PHY) enhancements, multi-user (MU) medium access control (MU-MAC), spatial reuse (SR), and power efficiency are discussed in detail, covering both standardization technologies as well as the latest academic studies. Furthermore, performance requirements of IEEE 802.11ax are evaluated via a newly proposed systems and link-level integrated simulation platform (SLISP). Simulations results confirm that IEEE 802.11ax significantly improves the user experience in high-density deployment, while successfully achieves the average per user throughput requirement in project authorization request (PAR) by four times compared to the legacy IEEE 802.11. Finally, potential advancement beyond IEEE 802.11ax are discussed to complete this holistic study on the latest IEEE 802.11ax. To the best of our knowledge, this article is the first study to directly investigate and analyze the latest stable version of IEEE 802.11ax, and the first work to thoroughly and deeply evaluate the compliance of the performance requirements of IEEE 802.11ax.
قيم البحث
اقرأ أيضاً
Wi-Fi technology is continuously innovating to cater to the growing customer demands, driven by the digitalisation of everything, both in the home as well as the enterprise and hotspot spaces. In this article, we introduce to the wireless community t
he next generation Wi-Fi$-$based on IEEE 802.11be Extremely High Throughput (EHT)$-$, present the main objectives and timelines of this new 802.11be amendment, thoroughly describe its main candidate features and enhancements, and cover the important issue of coexistence with other wireless technologies. We also provide simulation results to assess the potential throughput gains brought by 802.11be with respect to 802.11ax.
IEEE 802.16m amends the IEEE 802.16 Wireless MAN-OFDMA specification to provide an advanced air interface for operation in licenced bands. It will meet the cellular layer requirements of IMT-Advanced next generation mobile networks. It will be design
ed to provide significantly improved performance compared to other high rate broadband cellular network systems. For the next generation mobile networks, it is important to consider increasing peak, sustained data reates, corresponding spectral efficiencies, system capacity and cell coverage as well as decreasing latency and providing QoS while carefully considering overall system complexity. In this paper we provide an overview of the state-of-the-art mobile WiMAX technology and its development. We focus our discussion on Physical Layer, MAC Layer, Schedular,QoS provisioning and mobile WiMAX specification.
Support of real-time applications that impose strict requirements on packet loss ratio and latency is an essential feature of the next generation Wi-Fi networks. Initially introduced in the 802.11ax amendment to the Wi-Fi standard, uplink OFDMA seems
to be a promising solution for supported low-latency data transmission from the numerous stations to an access point. In this paper, we study how to allocate OFDMA resources in an 802.11ax network and propose an algorithm aimed at providing the delay less than one millisecond and reliability up to 99.999% as required by numerous real-time applications. We design a resource allocation algorithm and with extensive simulation, show that it decreases delays for real-time traffic by orders of magnitude, while the throughput for non-real-time traffic is reduced insignificantly.
We consider the scheduling and resource allocation problem in AP-initiated uplink OFDMA transmissions of IEEE 802.11ax networks. The uplink OFDMA resource allocation problem is known to be non-convex and difficult to solve in general. However, due to
the special subcarrier allocation model of IEEE 802.11ax, the utility maximization problem involving the instantaneous rates of stations can be formulated as an assignment problem, and hence can be solved using the Hungarian method. In this paper, we address the more general problem of stochastic network utility maximization. Specifically, we maximize the utility of long-term average rates of stations subject to average rate and power constraints using Lyapunov optimization. The resulting resource allocation policies perform arbitrarily close to optimal and have polynomial time complexity. An important advantage of the proposed framework is that it can be used along with the target wake time mechanism of IEEE 802.11ax to provide guarantees on the average power consumption and/or achievable rates of stations whenever possible. Two key applications of such a design approach are power-constrained IoT networks and battery-powered sensor networks. We complement the theoretical study with computer simulations that evaluate our approach against other existing methods.
In the Internet of Things scenarios, it is crucially important to provide low energy consumption of client devices. To address this challenge, new Wi-Fi standards introduce the Target Wake Time (TWT) mechanism. With TWT, devices transmit their data a
ccording to a schedule and move to the doze state afterwards. The main problem of this mechanism is the clock drift phenomenon, because of which the devices cease to strictly comply with the schedule. As a result, they can miss the scheduled transmission time, which increases active time and thus power consumption. The paper investigates uplink transmission with two different TWT operation modes. With the first mode, a sensor transmits a packet to the access point (AP) after waking up, using the random channel access. With the second mode, the AP polls stations and they can transmit a packet only after receiving a trigger frame from the AP. For both modes, the paper studies how the average transmission time, the packet loss rate and the average energy consumption depend on the different TWT parameters. It is shown that when configured to guarantee the given packet loss rate, the first mode provides lower transmission time, while the second mode provides lower energy consumption.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
