اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدResilience Control of DC Shipboard Power Systems
72
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Direct current (DC) network has been recognized as a promising technique, especially for shipboard power systems (SPSs). Fast resilience control is required for an SPS to survive after faults. Towards this end, this paper proposes the indices of survivability and functionality, based on which a two-phase resilience control method is derived. The on/off status of loads are determined in the first phase to maximize survivability, while the functionality of supplying loads are maximized in the second phase. Based on a comprehensive model of a DC shipboard power systems (DC-SPS), the two-phase method renders two mixed-integer non-convex problems. To make the problems tractable, we develop second-order-cone-based convex relaxations, thus converting the problems into mixed-integer convex problems. Though this approach does not necessarily guarantee feasible, hence global, solutions to the original non-convex formulations, we provide additional mild assumptions, which ensures that the convex relaxations are exact when line constraints are not binding. In the case of inexactness, we provide a simple heuristic approach to ensure feasible solutions. Numerical tests empirically confirm the efficacy of the proposed method.
قيم البحث
اقرأ أيضاً
This paper considers a distributed PI-controller for networked dynamical systems. Sufficient conditions for when the controller is able to stabilize a general linear system and eliminate static control errors are presented. The proposed controller is
applied to frequency control of power transmission systems. Sufficient stability criteria are derived, and it is shown that the controller parameters can always be chosen so that the frequencies in the closed loop converge to nominal operational frequency. We show that the load sharing property of the generators is maintained, i.e., the input power of the generators is proportional to a controller parameter. The controller is evaluated by simulation on the IEEE 30 bus test network, where its effectiveness is demonstrated.
The presence of constant power loads (CPLs) in dc shipboard microgrids may lead to unstable conditions. The present work investigates the stability properties of dc microgrids where CPLs are fed by fuel cells (FCs), and energy storage systems (ESSs)
equipped with voltage droop control. With respect to the previous literature, the dynamics of the duty cycles of the dc-dc converters implementing the droop regulation are considered. A mathematical model has been derived, and tuned to best mimic the behavior of the electrical representation implemented in DIgSILENT. Then the model is used to find the sufficient conditions for stability with respect to the droop coefficient, the dc-bus capacitor, and the inductances of the dc-dc converters.
The trend in the electric power system is to move towards increased amounts of distributed resources which suggests a transition from the current highly centralized to a more distributed control structure. In this paper, we propose a method which ena
bles a fully distributed solution of the DC Optimal Power Flow problem (DC-OPF), i.e. the generation settings which minimize cost while supplying the load and ensuring that all line flows are below their limits are determined in a distributed fashion. The approach consists of a distributed procedure that aims at solving the first order optimality conditions in which individual bus optimization variables are iteratively updated through simple local computations and information is exchanged with neighboring entities. In particular, the update for a specific bus consists of a term which takes into account the coupling between the neighboring Lagrange multiplier variables and a local innovation term that enforces the demand/supply balance. The buses exchange information on the current update of their multipliers and the bus angle with their neighboring buses. An analytical proof is given that the proposed method converges to the optimal solution of the DC-OPF. Also, the performance is evaluated using the IEEE Reliability Test System as a test case.
In this letter we propose a generalized branch model to be used in DC optimal power flow (DCOPF) applications. Besides AC lines and transformers, the formulation allows for representing variable susceptance branches, phase shifting transformers, HVDC
lines, zero impedance lines and open branches. The possibility to model branches with concurrently variable susceptance and controllable phase shift angles is also provided. The model is suited for use in DCOPF formulations aimed at the optimization of remedial actions so as to exploit power system flexibility; applications to small-, medium- and large-scale systems are presented to this purpose.
In this paper, a full-bridge boost power converter topology is studied for power factor control, using output high order sliding mode control. The AC/DC converters are used for charging the battery and super-capacitor in hybrid electric vehicles from
the utility. The proposed control forces the input currents to track the desired values, which can controls the output voltage while keeping the power factor close to one. Super-twisting sliding mode observer is employed to estimate the input currents and load resistance only from the measurement of output voltage. Lyapunov analysis shows the asymptotic convergence of the closed loop system to zero. Simulation results show the effectiveness and robustness of the proposed controller.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
